Intel® Server System R1000GZ/GL Product Family Technical Product Specification Revision 2.
® Intel Server System R1000GZ/GL Product Family TPS Revision History Date January 2012 Revision Number 1.0 Modifications 1st Production Release • Updated Features Table • Updated Environmental Limits Table o Added ASHRAE support details April 2012 1.1 • Updated thermal management sections • Updated sections for embedded SCU and RAID support • Added sections for product errata definition and FRUSDR usage • Updated add-in card length limits to riser card sections.
R1000GZ/GL Product Family Disclaimers Disclaimers INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT.
® Intel Server System R1000GZ/GL Product Family TPS Table of Contents 1. Introduction ........................................................................................................................1 1.1 Chapter Outline ......................................................................................................1 1.2 Server Board Use Disclaimer .................................................................................1 1.3 Product Errata ............................................
® Intel Server System R1000GZ/GL Product Family TPS 3.6.14 Voltage Interruptions ............................................................................................22 3.6.15 Protection Circuits ................................................................................................22 3.6.16 Over-current Protection (OCP) .............................................................................22 3.6.17 Over-voltage Protection (OVP) ......................................................
® Intel Server System R1000GZ/GL Product Family TPS 5.3 Optical Drive Support ...........................................................................................41 5.4 eUSB SSD Support ..............................................................................................43 5.5 SATA DOM Support .............................................................................................43 6. Storage Controller Options Overview ................................................................
® Intel Server System R1000GZ/GL Product Family TPS List of Figures Figure 1. Chassis Dimensions.....................................................................................................5 Figure 2. System Components Overview ....................................................................................7 Figure 3. 3.5" Hard Drive Bay - 4 Drive Configuration .................................................................8 Figure 4. 2.5" Hard Drive Bay - 8 Drive Configuration .............
® Intel Server System R1000GZ/GL Product Family TPS List of Tables Table 1. System Feature Set ...................................................................................................... 4 Table 2. System Environmental Limits Summary ........................................................................ 6 Table 3. Power Supply Module Output Power Connector Pin-out ............................................. 16 Table 4. Riser Slot Power Pin-out ("OPT_12V_PWR_#") .............................
® Intel Server System R1000GZ/GL Product Family TPS < This page intentionally left blank. > Revision 2.
® Intel Server System R1000GZ/GL Product Family TPS 1. Introduction This Technical Product Specification (TPS) provides system level information for the Intel® Server System R1000GZ and Intel® Server System R1000GL product families. The system level features of both these product families are common, however the server board integrated into them is different.
® Intel Server System R1000GZ/GL Product Family TPS 1.3 Product Errata The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Product Errata are documented in the Intel® Server Board S2600GZGL, Intel® Server System R1000GZGL, Intel® Server System R2000GZGL Monthly Specification Update which can be downloaded from http://www.intel.com/support 2 Revision 2.
® Intel Server System R1000GZ/GL Product Family TPS 2. Product Family Overview This generation of Intel 1U server platforms offers a variety of system options to meet the varied configuration requirements of high-density high-performance computing environments. The Intel® Server System R1000GZ/GL product family includes several available 1U rack mount server systems that are integrated with either an Intel® Server Board S2600GZ or Intel® Server Board S2600GL.
® Intel Server System R1000GZ/GL Product Family TPS Table 1.
® Intel Server System R1000GZ/GL Product Family TPS Power Supply Options The server system can have up to two power supply modules installed, providing support for the following power configurations: 1+0, 1+1 Redundant Power, and 2+0 Combined Power Three power supply options: o AC 460W Gold o AC 750W Platinum o DC 750W Gold Storage Bay Options 4x – 3.5” SATA/SAS Hot Swap Hard Drive Bays + Optical Drive support 8x – 2.
® Intel Server System R1000GZ/GL Product Family TPS 2.2 System Level Environmental Limits The following table defines the system level operating and non-operating environmental limits. Table 2. System Environmental Limits Summary Parameter Limits Temperature Operating ASHRAE Class A2 – Continuous Operation. 10º C to 35º C (50º F to 95º F) with the maximum rate of change not to exceed 10°C per hour ASHRAE Class A3 – Includes operation up to 40C for up to 900 hrs per year.
® Intel Server System R1000GZ/GL Product Family TPS Disclaimer Note: Intel ensures the unpackaged server board and system meet the shock requirement mentioned above through its own chassis development and system configuration. It is the responsibility of the system integrator to determine the proper shock level of the board and system if the system integrator chooses different system configuration or different chassis.
® Intel Server System R1000GZ/GL Product Family TPS Figure 3. 3.5" Hard Drive Bay - 4 Drive Configuration Figure 4. 2.5" Hard Drive Bay - 8 Drive Configuration 2.3.2 Back Panel Features Figure 5. Back Panel Feature Identification 2.3.3 8 Front Control Panel Options Label A Description System ID Button w/Integrated LED Label F Description System Status LED B NMI Button (recessed, tool required for use) G Power Button w/Integrated LED Revision 2.
® Intel Server System R1000GZ/GL Product Family TPS C NIC-1 Activity LED H Hard Drive Activity LED D NIC-3 Activity LED I NIC-4 Activity LED E System Cold Reset Button J NIC-2 Activity LED Figure 6. Front Control Panel Options 2.4 Server Board Features Overview The following illustration provides a general overview of the server board, identifying key feature and component locations. The majority of the items identified are common between the Intel® Server Board S2600GL and S2600GZ.
® Intel Server System R1000GZ/GL Product Family TPS ® Figure 7. Intel Server Board S2600GZ 10 Label A Description System ID Label I Description System Fan #3 Fan Fault B System Status J Memory Fault C POST Code Diagnostics K System Fan #2 Fan Fault D 12V Stand-by Power Present L System Fan #1 Fan Fault E CPU-2 Fault M CPU-1 Fault F System Fan #6 Fan Fault N CATERR G System Fan #5 Fan Fault O System Power Good H System Fan #4 Fan Fault Revision 2.
® Intel Server System R1000GZ/GL Product Family TPS ® Figure 8. Intel Light-Guided Diagnostic LEDs - Server Board 2.5 Available Front Bezel Support The optional front bezel is made of Black molded plastic and uses a snap-on design. When installed, its design allows for maximum airflow to maintain system cooling requirements. The face of the bezel assembly includes optional snap-in identification badge and wave (shown) features to allow for customization.
® Intel Server System R1000GZ/GL Product Family TPS Figure 12. Front Bezel accessory ID Badge mechanical drawings 2.6 Available Rack and Cabinet Mounting Kit Options Advisory Note – Available rack and cabinet mounting kits are not designed to support shipment of the server system while installed in a rack. If you chose to do so, Intel advises you verify your shipping configuration with appropriate shock and vibe testing, before shipment.
® Intel Server System R1000GZ/GL Product Family TPS • AXXVRAIL – Value rack mount rail kit o 1U to 4U compatible o 130 lbs (59 Kgs) max support weight o Tool-less chassis attach o Tools required to attach to rails to rack o 2/3 extension from rack • AXXELVRAIL – Enhanced Value rack mount rail kit o 1U to 4U compatible o 130 lbs (59 Kgs) max support weight o Tool-less chassis attach o Tools required to attach to rails to rack o 2/3 extension from rack o Improved robustness over AXXVRAIL, same mechanical
® Intel Server System R1000GZ/GL Product Family TPS 3. Power Subsystem This chapter provides a high level overview of the power management features and specification data for the power supply options available for this server product. Specification variations will be identified for each supported power supply.
® Intel Server System R1000GZ/GL Product Family TPS Airflow direction 2mm B25 Retention Latch A25 185mm FCI 2x25 card edge connector 10035388-102 74mm B1 A1 11mm 40mm fan 39mm 8.5mm Figure 13. Power Supply Module Mechanical Drawing Figure 14. AC and DC Power Supply - Connector Views Figure 15. Power Supply Module Revision 2.
® Intel Server System R1000GZ/GL Product Family TPS 3.2 3.2.1 Power Connectors Power Supply Module Card Edge Connector Each power supply module has a single 2x25 card edge output connection that plugs directly into a matching slot connector on the server board. The connector provides both power and communication signals to the server board. The following table defines the connector pin-out. Table 3.
® Intel Server System R1000GZ/GL Product Family TPS Each connector is labeled as “OPT_12V_PWR_1” and “OPT_12V_PWR_2” on the server board. The following table provides the pin-out for both connectors. Table 4. Riser Slot Power Pin-out ("OPT_12V_PWR_#") 3.2.3 Signal Description P12V Pin# 3 Pin# 1 Signal Description GROUND P12V 4 2 GROUND Hot Swap Backplane Power Connector The server board includes one white 2x4-pin power connector that is cabled to the hot swap backplane.
® Intel Server System R1000GZ/GL Product Family TPS Table 9. 750 Watt DC Power Supply Efficiency (Gold) Loading Minimum Efficiency 3.4 100% of maximum 88% 50% of maximum 92% 20% of maximum 88% 10% of maximum 80% Power Cord Specification Requirements Power cords used must meet the specification requirements listed in the following table. Table 10. AC Power Cord Specifications Cable Type Wire Size Temperature Rating Amperage Rating Voltage Rating SJT 16 AWG 105ºC 13 A 125 V Figure 16.
® Intel Server System R1000GZ/GL Product Family TPS 3.5 Optional Chassis Grounding Support The system provides 10-32 threaded grounding studs on the back panel of the chassis, allowing for optional system grounding via a grounding strap (not provided). Figure 18. Chassis Grounding Studs Note: Product Safety Regulations pertaining to the use of DC power supplies require that chassis grounding studs be used for all DC power supply configurations.
® Intel Server System R1000GZ/GL Product Family TPS 3.6.3 AC Line Isolation Requirements The power supply shall meet all safety agency requirements for dielectric strength. Transformers’ isolation between primary and secondary windings must comply with the 3000Vac (4242Vdc) dielectric strength criteria. If the working voltage between primary and secondary dictates a higher dielectric strength test voltage the highest test voltage should be used.
® Intel Server System R1000GZ/GL Product Family TPS Duration 0 to 1/2 AC cycle > 1 AC cycle Sag 95% >30% Operating AC Voltage Nominal AC Voltage ranges Nominal AC Voltage ranges Line Frequency 50/60Hz 50/60Hz Performance Criteria No loss of function or performance Loss of function acceptable, self recoverable Table 13. AC Line Surge Transient Performance Duration Continuous 0 to ½ AC cycle 3.6.
® Intel Server System R1000GZ/GL Product Family TPS 3.6.14 Voltage Interruptions The power supply shall comply with the limits defined in EN55024: 1998/A1: 2001/A2: 2003 using the IEC 61000-4-11: Second Edition: 2004-03 test standard and performance criteria C defined in Annex B of CISPR 24. 3.6.15 Protection Circuits Protection circuits inside the power supply cause only the power supply’s main outputs to shut down.
® Intel Server System R1000GZ/GL Product Family TPS 3.7 DC Power Supply Input Specifications The following sections provide the DC Input Specifications for systems configured with DC power supply modules. NOTE: Product Safety Regulations pertaining to the use of DC power supplies require that chassis grounding studs be used for all DC power supply configurations.
® Intel Server System R1000GZ/GL Product Family TPS or out of regulation conditions, but shall not damage the power supply. The power supply should recover and meet all turn on requirements for DC dropouts that last longer than 0.2ms. The power supply must meet the DC dropout requirement over rated DC voltages and output loading conditions. 3.7.
® Intel Server System R1000GZ/GL Product Family TPS 3.7.7.4 Surge Immunity The power supply shall be tested with the system for immunity, per EN 55024:1998, EN 61000-4-5:1995 and ANSI C62.45: 1992. The pass criteria include: No unsafe operation is allowed under any condition; All power supply output voltage levels to stay within proper spec levels; No change in operating state or loss of data during and after the test profile; No component damage under any condition.
® Intel Server System R1000GZ/GL Product Family TPS 3.8 Cold Redundancy Support Power supplies that support cold redundancy can be enabled to go into a low-power state (that is, cold redundant state) in order to provide increased power usage efficiency when system loads are such that both power supplies are not needed. When the power subsystem is in Cold Redundant mode, only the needed power supply to support the best power delivery efficiency is ON.
® Intel Server System R1000GZ/GL Product Family TPS 3.8.3 BMC Requirements The BMC uses the Cold_Redundancy_Config command to define/configure the power supply’s roll in cold redundancy and to turn on/off cold redundancy. The BMC shall schedule a rolling change for which PSU is the Active, Cold Stby1, Cold Stby 2, and Cold Stby 3 power supply. This allows for equal loading across power supply over their life.
® Intel Server System R1000GZ/GL Product Family TPS Output ON and OK No AC power to all power supplies AC present / Only 12VSB on (PS off) or PS in Cold redundant state AC cord unplugged or AC power lost; with a second power supply in parallel still with AC input power. Power supply warning events where the power supply continues to operate; high temp, high power, high current, slow fan.
® Intel Server System R1000GZ/GL Product Family TPS 4. Thermal Management The fully integrated system is designed to operate at external ambient temperatures of between 10ºC- 35ºC with limited excursion based operation up to 45ºC, as specified in Table 2. System Environmental Limits Summary.
® Intel Server System R1000GZ/GL Product Family TPS • • 4.2 In single power supply configurations, the 2nd power supply bay must have the supplied filler blank installed at all times. The system top-cover must be installed at all times. Thermal Management Overview In order to maintain the necessary airflow within the system, all of the previously listed components and top cover need to be properly installed.
® Intel Server System R1000GZ/GL Product Family TPS 4.2.3 Set Fan Profile This option is used to set the desired Fan Profile. Available settings include: [Performance] and [Acoustic]. The Acoustic mode offers the best acoustic experience and appropriate cooling capability supporting the majority of the add-in cards used. Performance mode is designed to provide sufficient cooling capability covering all kinds of add-in cards on the market. 4.2.
® Intel Server System R1000GZ/GL Product Family TPS The following diagram illustrates the fan speed control structure. Figure 18. Fan Control Model 4.3 System Fans Six managed dual rotor 40mm x 56mm system fans and an embedded fan for each installed power supply, provide the primary airflow for the system. The following table provides the volumetric air flow requirements for different 2U system configurations. Table 21.
® Intel Server System R1000GZ/GL Product Family TPS Each system fan is mounted inside its own plastic fan housing which include rotational vibration dampening features. The fan assemblies are held in place by fitting them over mounting pins coming up from the chassis base. The system fan assembly is designed for ease of use and supports several features. System fans are NOT hot-swappable. Each fan and fan assembly is designed for tool-less insertion and extraction from the system.
® Intel Server System R1000GZ/GL Product Family TPS Table 22.
® Intel Server System R1000GZ/GL Product Family TPS 5. System Storage and Peripheral Options The Intel® Server System R1000GZ/GL product family has support for many storage device options, including: • • • • • Hot Swap 2.5” Hard Disk Drives Hot Swap 3.5” Hard Disk Drives SATA Optical Drive Low Profile (2mm) eUSB Solid State Device (eUSB SSD) SATA DOMs Support for different storage and peripheral device options will vary depending on the system SKU.
® Intel Server System R1000GZ/GL Product Family TPS Table 23. Drive Status LED States Amber Off Solid On Blink No access and no fault Hard Drive Fault has occured RAID rebuild in progress (1 Hz), Identify (2 Hz) Table 24. Drive Activity LED States Condition Power on with no drive activity Green Power on with drive activity Power on and drive spun down Power on and drive spinning up 5.1.
® Intel Server System R1000GZ/GL Product Family TPS On the backside of each backplane are several connectors. The following illustration identifies each. Label A B C Description Power connector 4-port Mini-SAS cable connectors SMBus-In cable connector – From Server board A – Power Harness Connector – The backplane includes a 2x2 connector supplying power to the backplane. Power is routed to the backplane via a power cable harness from the server board.
® Intel Server System R1000GZ/GL Product Family TPS 5.2 3.5” Hard Disk Drive Support The server is available with support for four 3.5” hard disk drives as illustrated below. Figure 22. 3.5" Hard Drive Bay Configuration The drive bay can support either SATA or SAS hard disk drives. Mixing of drive types within the hard drive bay is not supported. Hard disk drive type is dependent on the type of host bus controller used, SATA only or SAS. Each 3.
® Intel Server System R1000GZ/GL Product Family TPS Figure 23. Option to install 2.5” SSD into a 3.5” drive blank Note: Due to degraded performance and reliability concerns, the use of the 3.5” drive blank as a 2.5” device bracket is intended to support SSD type storage devices only. Installing a 2.5” hard disk drive into the 3.5” drive blank cannot be supported.
® Intel Server System R1000GZ/GL Product Family TPS Condition Power on with no drive activity Green Power on with drive activity Power on and drive spun down Power on and drive spinning up 5.2.1 Drive Type SAS SATA SAS SATA SAS SATA SAS SATA Behavior LED stays on LED stays off LED blinks off when processing a command LED blinks on when processing a command LED stays off LED stays off LED blinks LED stays off 3.
® Intel Server System R1000GZ/GL Product Family TPS Label A B C D Description 7-pin SATA/SAS I/O connectors SMBus-In cable connector – From Server board SGPIO connector Power connector A – 7-pin SATA I/O Connectors – The backplane has four 7-pin SATA/SAS I/O connectors, one for each hard drive. A single multi-connector cable is routed from the backplane to a four port mini-SAS connector on the server board or other optionally installed SATA/SAS host bus adapter. B –.
® Intel Server System R1000GZ/GL Product Family TPS A 2x3 pin power connector on the server board labeled “ODD/SSD PWR”, is designed to provide power to the optical drive. SATA signals for the optical drive are cabled from either of the white 7-pin single port AHCI SATA connectors on the server board. 42 Revision 2.
® Intel Server System R1000GZ/GL Product Family TPS 5.4 eUSB SSD Support The system provides support for a low profile eUSB SSD storage device. A 2mm 2x5-pin connector labeled “eUSB SSD” near the rear I/O section of the server board is used to plug this small flash storage device into. Bottom View Top View Figure 25. Low Profile eUSB SSD Support eUSB features include: • • • • 5.5 2 wire small form factor Universal Serial Bus 2.
® Intel Server System R1000GZ/GL Product Family TPS 6. Storage Controller Options Overview The server platform supports many different embedded and add-in SATA/SAS controller and SAS Expander options to provide a large number of possible storage configurations. This section will provide an overview of the different options available. 6.
® Intel Server System R1000GZ/GL Product Family TPS 6.2 Embedded Software RAID Support The system includes support for two embedded software RAID options: • • Intel® Embedded Server RAID Technology 2 (ESRT2) based on LSI* MegaRAID SW RAID technology Intel® Rapid Storage Technology (RSTe) Using the BIOS Setup Utility, accessed during system POST, options are available to enable/disable SW RAID, and select which embedded software RAID option to use.
® Intel Server System R1000GZ/GL Product Family TPS 6.3 Intel® Integrated RAID Module Support (Available Option) The system has support for many Intel and 3rd party PCIe add-in RAID adapters which can be installed in available PCIe add-in cards slots. For system configurations with limited add-in card slot availability, an optional Intel® Integrated RAID mezzanine module can be installed onto a high density 80-pin connector (labeled “SAS Module” ) on the server board. ® Table 26.
® Intel Server System R1000GZ/GL Product Family TPS Figure 27.
® Intel Server System R1000GZ/GL Product Family TPS B – USB Ports – The front I/O panel includes two USB ports. The USB ports are cabled to a 2x5 connector on the server board labeled “FP USB”. Note – On systems that support 8x2.5” hard drives, the I/O Panel can be replaced with a SATA optical drive. 7.2 Control Panel Features The system includes a control panel that provides push button system controls and LED indicators for several system features.
® Intel Server System R1000GZ/GL Product Family TPS F – System Status LED – The System Status LED is a bi-color (Green/Amber) indicator that shows the current health of the server system. The system provides two locations for this feature; one is located on the Front Control Panel, the other is located on the back edge of the server board, viewable from the back of the system. Both LEDs are tied together and will show the same state.
® Intel Server System R1000GZ/GL Product Family TPS Amber Solid on Critical, nonrecoverable – System is halted Fatal alarm – system has failed or shutdown: 1. CPU CATERR signal asserted 2. MSID mismatch detected (CATERR also asserts for this case). 3. CPU 1 is missing 4. CPU Thermal Trip 5. No power good – power fault 6. DIMM failure when there is only 1 DIMM present and hence no good 1 memory present . 7. Runtime memory uncorrectable error in non redundant mode. 8. DIMM Thermal Trip or equivalent 9.
® Intel Server System R1000GZ/GL Product Family TPS 8. Intel® Local Control Panel The Intel® Local Control Panel option (Intel Product Order Code – A1U2ULCP) utilizes a combination of control buttons and LCD display to provide system accessibility and monitoring. Label A B C D E F Description LCD Display Left Control Button “Enter” Button Right Control Button USB 2.0 Port USB 2.
® Intel Server System R1000GZ/GL Product Family TPS 9. PCI Riser Card Support The system includes two riser card slots on the server board. Available riser cards can be used in either slot. This section will provide an overview of each available riser card and describe the server board features and architecture supporting them. 9.1 Riser Slot Overview The server board includes two riser card slots labeled “RISER 1” and “RISER 2”.
® Intel Server System R1000GZ/GL Product Family TPS Figure 32. Intel® Server Board S2600GZ/GL PCI Bus Layout Diagram Revision 2.
® Intel Server System R1000GZ/GL Product Family TPS 9.2 Riser Card Support The system supports two single slot PCIe x16 (x16 lanes, x16 slot) riser cards. Each riser card is mounted to a bracket assembly which is inserted into a riser card slot on the server board. Figure 33. Add-in Card Support Each riser card assembly has support for a single full height, ½ length PCIe add-in card.
® Intel Server System R1000GZ/GL Product Family TPS 9.3 PCIe Add-in card support The PCIe sub-system of the server board has support for PCIe add-in cards that follow the PCIe Gen1, Gen2 and Gen3 specifications. However, the performance of some PCIe Gen3 cards may be forced to operate at Gen2 speeds due to electrical signaling characteristic limitations that exist between the server board and some PCIe Gen 3 add-in cards.
® Intel Server System R1000GZ/GL Product Family TPS The “Processor PCIe Link Speed” menu will display selectable options for each installed processor, identified as “Socket #”, where # identifies the CPU number. Using information provided in the following tables, select the processor associated with the PCIe port to be configured. Table 29. Riser Slot #1 – PCIe Port Routing Riser Slot #1 – Riser Card Options 1U – 1 PCIe Slot Riser Card (CPU #1 – Port 3A) (x16 elec, x16 mech) 56 Revision 2.
® Intel Server System R1000GZ/GL Product Family TPS Table 30. Riser Slot #2 – PCIe Port Routing Riser Slot #2 – Riser Card Options 1U – 1 PCIe Slot Riser Card (CPU #2 – Port 2A) (x16 elec, x16 mech) The “Socket # PCIe Ports Link Speed” window displays selectable options for each configurable PCIe port associated with the current system configuration. Note: The illustrations below are for reference purposes only.
® Intel Server System R1000GZ/GL Product Family TPS Select the desired PCIe Gen level. After making all desired changes in BIOS setup, be sure to save the changes and reboot the system. 58 Revision 2.
® Intel Server System R1000GZ/GL Product Family TPS 10. Mezzanine I/O Module Support 10.1 I/O Module Support In addition to the embedded I/O features of the server board, and those available with the addition of a PCIe add-in card, the server also provides concurrent support of an optionally installed mezzanine I/O module. The following table lists the Intel® I/O modules available for this server.
® Intel Server System R1000GZ/GL Product Family TPS Figure 35. Intel® RMM4 Lite Activation Key Installation Figure 36. Intel® RMM4 Dedicated Management NIC Installation Table 31. Enabling Advanced Management Features Manageability Hardware Benefits ® Comprehensive IPMI based base manageability features ® No dedicated NIC for management Enables KVM & media redirection from onboard NIC ® Dedicated NIC for management traffic. Higher bandwidth connectivity for KVM & media Redirection with 1Gbe NIC.
® Intel Server System R1000GZ/GL Product Family TPS Appendix A: Integration and Usage Tips This section provides a list of useful information that is unique to the Intel® Server System R1000GZ/GL Product Family and should be kept in mind while configuring your server system. • • • • • • • • • • Only the Intel® Xeon® processor E5-2600 and the Intel® Xeon® processor E5-2600 V2 product family are supported in this Intel® Server system. Previous generation Intel® Xeon® processors are not supported.
® Intel Server System R1000GZ/GL Product Family TPS Appendix B: POST Code Diagnostic LED Decoder As an aid to assist in trouble shooting a system hang that occurs during a system’s Power-On Self Test (POST) process, the server board includes a bank of eight POST Code Diagnostic LEDs on the back edge of the server board.
® Intel Server System R1000GZ/GL Product Family TPS Table 33. Diagnostic LED POST Code Decoder Checkpoint Diagnostic LED Decoder 1 = LED On, 0 = LED Off Upper Nibble Lower Nibble MSB 8h 4h 2h 1h 8h 4h 2h #7 #6 #5 #4 #3 #2 #1 LSB 1h #0 Description LED # SEC Phase 01h 0 0 0 0 0 0 0 1 First POST code after CPU reset 02h 0 0 0 0 0 0 1 0 Microcode load begin 03h 0 0 0 0 0 0 1 1 CRAM initialization begin 04h 0 0 0 0 0 1 0 0 Pei Cache When Disabled 05h 0 0 0 0 0 1 0 1 SEC Core At Power On Begin.
® Intel Server System R1000GZ/GL Product Family TPS Checkpoint Diagnostic LED Decoder 1 = LED On, 0 = LED Off Upper Nibble Lower Nibble MSB 8h 4h 2h 1h 8h 4h 2h #7 #6 #5 #4 #3 #2 #1 1 0 1 0 0 0 1 1 0 1 0 0 1 0 1 0 1 0 0 1 0 1 0 1 0 0 1 1 1 0 1 0 0 1 1 1 0 1 0 1 0 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 1 0 1 0 1 1 0 1 0 1 0 1 1 0 1 0 1 0 1 1 1 1 0 1 0 1 1 1 1 0 1 1 0 0 0 1 0 1 1 0 0 0 1 0 1 1 0 0 1 1 0 1 1 0 0 1 1 0 1 1 0 1 0 1 0 1 1 0 1 0 1 0 1 1 0 1 1 1 0 1 1 0 1 1 0 0 0 0 0 0 0 LED # A3h A4h A5h A6h A7h A8h A9
® Intel Server System R1000GZ/GL Product Family TPS POST Memory Initialization MRC Diagnostic Codes There are two types of POST Diagnostic Codes displayed by the MRC during memory initialization; Progress Codes and Fatal Error Codes. The MRC Progress Codes are displays to the Diagnostic LEDs that show the execution point in the MRC operational path at each step. Table 34.
® Intel Server System R1000GZ/GL Product Family TPS Table 35.
® Intel Server System R1000GZ/GL Product Family TPS Appendix C: POST Code Errors Most error conditions encountered during POST are reported using POST Error Codes. These codes represent specific failures, warnings, or are informational. POST Error Codes may be displayed in the Error Manager display screen, and are always logged to the System Event Log (SEL). Logged events are available to System Management applications, including Remote and Out of Band (OOB) management.
® Intel Server System R1000GZ/GL Product Family TPS Error Code 8131 8132 8133 8160 8161 8162 8163 8170 8171 8172 8173 8180 8181 8182 8183 8190 8198 8300 8305 83A0 83A1 84F2 84F3 84F4 84FF 8500 8501 8520 8521 8522 8523 8524 8525 8526 8527 8528 8529 852A 852B 852C 852D 852E 852F 8530 8531 8532 8533 8534 8535 8536 8537 8538 8539 853A 853B 853C 853D 853E 853F (Go to 85C0) 8540 68 Error Message Processor 02 disabled Processor 03 disabled Processor 04 disabled Processor 01 unable to apply microcode update Proc
® Intel Server System R1000GZ/GL Product Family TPS Error Code 8541 8542 8543 8544 8545 8546 8547 8548 8549 854A 854B 854C 854D 854E 854F 8550 8551 8552 8553 8554 8555 8556 8557 8558 8559 855A 855B 855C 855D 855E 855F (Go to 85D0) 8560 8561 8562 8563 8564 8565 8566 8567 8568 8569 856A 856B 856C 856D 856E 856F 8570 8571 8572 8573 8574 8575 8576 8577 8578 8579 857A 857B 857C Revision 2.
® Intel Server System R1000GZ/GL Product Family TPS Error Code 857D 857E 857F (Go to 85E0) 85C0 85C1 85C2 85C3 85C4 85C5 85C6 85C7 85C8 85C9 85CA 85CB 85CC 85CD 85CE 85CF 85D0 85D1 85D2 85D3 85D4 85D5 85D6 85D7 85D8 85D9 85DA 85DB 85DC 85DD 85DE 85DF 85E0 85E1 85E2 85E3 85E4 85E5 85E6 85E7 85E8 85E9 85EA 85EB 85EC 85ED 85EE 85EF 8604 8605 8606 92A3 92A9 A000 A001 A002 A003 70 Error Message DIMM_J3 encountered a Serial Presence Detection (SPD) failure DIMM_K1 encountered a Serial Presence Detection (SPD)
® Intel Server System R1000GZ/GL Product Family TPS Error Code A100 A421 A5A0 A5A1 A6A0 Error Message BIOS ACM Error PCI component encountered a SERR error PCI Express component encountered a PERR error PCI Express component encountered an SERR error DXE Boot Service driver: Not enough memory available to shadow a Legacy Option ROM Response Major Fatal Minor Fatal Minor POST Error Beep Codes The following table lists the POST error beep codes.
® Intel Server System R1000GZ/GL Product Family TPS Appendix D: System Configuration Table for Thermal Compatibility The following list reflects specified notes identified in the “Support Notes” column in the table. Each note reflects support criteria associated with a specific system configuration. Notes not specified in the table may reflect support criteria for a R2000GZ/GL Base System SKU described in the appropriate 2U Technical Product Specification.
® Intel Server System R1000GZ/GL Product Family TPS Classifications Max Ambient ASHRAE Redundant Fan Configuration Redundancy Available Cooling Power Supply ® ® Intel Xeon processor E5-2600 product family ® ® Intel Xeon processor E5-2600 v2 product family Memory Type Revision 2.
® Intel Server System R1000GZ/GL Product Family TPS ASHRAE Add-in Cards I/O Modules Intel® Xeon Phi™ or Non-Intel GPGPU RAID Battery Backup Internal SSD 74 Classifications Max Ambient Base System SKUs: Base System SKUs: R1304GZ/GLxxxx R1208GZ/GLxxxx A2 35°C A3 40°C A4 45°C A2 35°C A3 40°C A4 45°C Riser #1 - Bottom Slot (1U riser and 2U riser) Riser #1 - Middle Slot (2U riser) Riser #1 - Top Slot (2U riser) Riser #2 - Bottom Slot (1U riser and 2U riser) Riser #2 - Middle Slot (2U riser) R
® Intel Server System R1000GZ/GL Product Family TPS Glossary Word/Acronym Definition ACA Australian Communication Authority ANSI American National Standards Institute BMC Baseboard Management Controller BIOS Basic Input/Output System CLST Closed Loop System Throttling CMOS Complementary Metal-oxide-semiconductor D2D DC-to-DC EMP Emergency Management Port ESRT2 Intel® Embedded Server RAID Technology 2 FP Front Panel FRB Fault Resilient Boot FRU Field Replaceable Unit 2 IC Inter-
® Intel Server System R1000GZ/GL Product Family TPS Reference Documents See the following documents for additional information: 76 Intel® Server Board S2600GZ/GL Technical Product Specification Intel® Server Board S2600GZ/GL Product Family Spares/Parts List and Configuration Guide Intel® Server System R1000GZ/GL Service Guide Intel® Server System R1000GZ/GL Quick Installation Guide Intel® S2600GZGL Product Family Power Budget and Thermal Configuration Tool BIOS for Platforms Based on Intel®
