Intel® RMFBU2/SSD Mounting Bracket A2UBKTMFBUSSD User’s Guide A Guide for Technically Qualified Assemblers of Intel® identified Subassemblies/Products Intel Order Number: G60806-001
Disclaimer ® Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document.
Safety Information Important Safety Instructions Read all caution and safety statements in this document before performing any of the instructions. See also Intel Server Boards and Server Chassis Safety Information on the Intel® Server Deployment Toolkit 3.0 CD and/or at http://www.intel.com/support/motherboards/server/sb/cs-010770.htm. Wichtige Sicherheitshinweise Lesen Sie zunächst sämtliche Warnund Sicherheitshinweise in diesem Dokument, bevor Sie eine der Anweisungen ausführen.
Warnings Heed safety instructions: Before working with your server product, whether you are using this guide or any other resource as a reference, pay close attention to the safety instructions. You must adhere to the assembly instructions in this guide to ensure and maintain compliance with existing product certifications and approvals. Use only the described, regulated components specified in this guide.
The Intel® RMFBU2/SSD Mounting Bracket (A2UBKTMFBUSSD) is designed as an accessory for the Intel® Server System R2000GZ/GL Product Family and the Intel® Server System R2000BB Product Family. It can support upto three Intel® RAID Maintenance Free Backup Units (AXXRMFBU2) or upto two Solid State Drives (SSDs). Note: Due to system thermal limitations, other available Intel RAID battery backup accessory kits cannot be supported with the A2UBKTMFBUSSD kit.
5. Connect cables. Please refer to Intel® RAID Maintenance Free Backup Unit AXXRMFBU2 User’s Guide for detailed instruction. To install a Solid State Drive 1. Remove the top cover from the server chassis (see instruction from the Quick Installation User’s Guide). 2. Position the Solid State Drive on the bracket (see letter “A”). 3. Secure the Solid State Drive with the four screws (see letter “B”). Figure 3. Install Solid State Drive to the bracket 4.
