SOLUTIONS Brief Intel® RAID Web Console 2 and StorCLI Command Line Tool Powered by LSI* MegaRAID technology Instant access, intuitive configuration/navigation, easy standard storage management and advanced features/software options.
Intel® RAID Web Console 2 Powered by LSI* MegaRAID technology The Intel® RAID Web Console 2 provides IT administrators with an easy-to-use tool for managing storage of all sizes. It empowers administrators to optimize storage application performance and data protection. This intuitive GUI enables system administrators to easily deploy all critical system storage functions, including creating and managing virtual drives, adding a drive to a RAID virtual drive and on the fly RAID migration.
Intel® RAID Web Console 2 Powered by LSI* MegaRAID technology Features and Benefits Simplified RAID Management - Easy Standard Storage Management The Intel RAID Web Console 2 features numerous improvements that help administrators spend less time configuring and managing their application’s storage including: simplified RAID-level migration wizard, Patrol READ properties screen, VD reconstruction wizard and 45 percent reduction in background iterations for RAID 5 volume construction.
Intel® RAID Web Console 2 Easy to use graphical interface feature highlights 1. Create a Virtual Drive 2. Replace, duplicate or monitor status Create, change, add or delete a virtual drive. Make a spanned disk group and hot spares. Remove a drive or change the RAID level of a virtual disk and much more. Replace a controller or duplicate an existing storage configuration on a new controller. Monitor the status of disk drives, virtual disks, enclosures and other devices. 3.
7. Run a Consistency Check 8. Scan for New Drives Consistency checks on fault-tolerant virtual disks scan the virtual disk to determine whether consistency data is corrupted and needs to be restored. The Intel RAID Web Console 2 normally detects newly installed disk drives and other storage devices. The Scan for Foreign Configuration feature can be used as well. 9. Remove a Drive. 10. Run a Patrol Read. Remove a non-failed drive that is connected to the controller safely and easily.
StorCLI Command Line Tool The Storage Command Line Tool (StorCLI) is the command line management software adapted from legacy 3Ware and LSI* MegaCLI for the Intel® RAID product line. The Storage Command Line Tool allows for the same features described in the Intel RAID Web Console 2 section above to be implemented albeit without the Graphical User Interface. The StorCLI is a command line interface that is designed to be easy to use, consistent, and easy to script.
For more information about the Intel RAID Web Console 2 and StorLib Command Line Tool, please see the Software Users Guides available at www.intel.com/go/RAID INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT.
