Intel® Remote Management Module 4 Technical Product Specification Intel order number G24513-005 Revision 1.
Revision History Intel® Remote Management Module 4 TPS Revision History Date January 2011 December 2011 Revision Number 1.0 1.1 1.2 Modifications Initial release. Updated for Intel® Server Boards and Systems Platforms Based on Intel® Xeon® Processor E5-4600/2600/2400/1600/1400 Product Families. Update for new speed POR. June 2012 1.3 Corrected description of NIC. July 2014 1.
Intel® Remote Management Module 4 TPS Table of Contents Table of Contents 1. Introduction ........................................................................................................................................ 1 1.1 Chapter Outline ................................................................................................................................... 1 2. RMM4 Overview ............................................................................................................
Table of Contents Intel® Remote Management Module 4 TPS 5.1 Enabling Advanced Management Features .......................................................................... 19 5.2 Keyboard, Video, Mouse (KVM) Redirection ......................................................................... 20 5.2.1 Remote Console ............................................................................................................................... 20 5.2.2 Performance....................................
Intel® Remote Management Module 4 TPS List of Figures List of Figures Figure 1. Intel® RMM4 Lite Picture ........................................................................................................................... 4 Figure 2. Intel® Dedicated Server Management NIC Picture (Apply to Intel® Server Boards and Systems Platforms Based on Intel® Xeon® Processor E5-4600/2600/2400/1600/1400 (V1 & V2), S1200V3RP and S1200BTL Product Families Only) RMM4 Connector and Component Layout ................
List of Tables Intel® Remote Management Module 4 TPS List of Tables Table 1. RMM4 and RMM4 Lite Properties (V1& V2) ...................................................................................... 2 Table 2. RMM4 and RMM4 Lite Properties (V3) ................................................................................................ 3 Table 3. RMM4 Lite Pin-outs ..................................................................................................................................
Intel® Remote Management Module 4 TPS 1. Introduction Introduction This Technical Product Specification (TPS) provides details about the architecture and feature set of the Intel® Remote Management Module 4 (Intel® RMM4). This document does not replace the Intel® RMM4 User’s Guide, but provides enhanced information to assist with understanding and learning more about specific features of the board. 1.
RMM4 Overview 2. Intel® Remote Management Module 4 TPS RMM4 Overview Intel® Remote Management Model 4 (RMM4) includes two components, Intel® Remote Management Module 4 Lite (RMM4 Lite) and Intel® Dedicated Management NIC (DMN). The RMM4 Lite is the key that can enable advance KVM and media sharing features for the server onboard Integrated BMC (ServerEngines* Pilot III Baseboard Management Controller). The DMN provides a dedicated management LAN interface with an Ethernet network controller.
Intel® Remote Management Module 4 TPS RMM4 Overview Because the DMN is integrated on the mother board, only the RMM4 Lite key is required to add Advanced integrated BMC KVM \ Media Features. Table 2. RMM4 and RMM4 Lite Properties (V3) Modules No RMM RMM4 Lite edition RMM4 full edition Revision 1.
RMM4 Board Layout Intel® Remote Management Module 4 TPS 3. RMM4 Board Layout 3.1 RMM4 Pictures Figure 1. Intel® RMM4 Lite Picture Figure 2. Intel® Dedicated Server Management NIC Picture (Apply to Intel® Server Boards and Systems Platforms Based on Intel® Xeon® Processor E5-4600/2600/2400/1600/1400 (V1 & V2), S1200V3RP and S1200BTL Product Families Only) RMM4 Connector and Component Layout 4 Intel order number G24513-005 Revision 1.
Intel® Remote Management Module 4 TPS 3.1.1 RMM4 Board Layout RMM4 Lite Keyed connector Figure 3. RMM4 Lite Connector and Component Layout Figure 4. Populate RMM4 Lite Revision 1.
RMM4 Board Layout 3.1.2 Intel® Remote Management Module 4 TPS Dedicated Management NIC (Apply to Intel® Server Boards and Systems Platforms Based on Intel® Xeon® Processor E5-4600/2600/2400/1600/1400 (V1 & V2), S1200V3RP and S1200BTL Product Families only) Figure 5. Components of Dedicated Management NIC Module Figure 6. Mount Dedicated Management NIC Module to Pedestal Chassis 6 Intel order number G24513-005 Revision 1.
Intel® Remote Management Module 4 TPS RMM4 Board Layout Figure 7. Mount Dedicated Management NIC Module to Rack Chassis Revision 1.
RMM4 Board Layout 3.2 3.2.1 Intel® Remote Management Module 4 TPS RMM4 Mechanical Drawings RMM4 Lite Figure 8. RMM4 Lite Mechanical Drawings 8 Intel order number G24513-005 Revision 1.
Intel® Remote Management Module 4 TPS 3.2.2 RMM4 Board Layout RMM4 Dedicated NIC (Apply to Intel® Server Boards and Systems Platforms Based on Intel® Xeon® Processor E5-4600/2600/2400/1600/1400 (V1 & V2), S1200V3RP and S1200BTL Product Families only) Figure 9. Dedicated Management NIC Mechanical Drawings Revision 1.
Hardware Architecture Intel® Remote Management Module 4 TPS 4. Hardware Architecture 4.1 Integrated BMC Board Architecture Intel® RMM4 utilizes the on-board ServerEngines* Pilot III Integrated Baseboard Management Controller (Integrated BMC). The Integrated BMC board architecture is displayed below: Figure 10. Integrated BMC Board Architecture 4.2 Integrated BMC Feature Set At the center of the server management subsystem is the ServerEngines* Pilot III Integrated Baseboard Management Controller.
Intel® Remote Management Module 4 TPS Hardware Architecture The LPC interface to the host is used for SIO and BMC communication. The LPC Bus interface provides IPMI Compliant KCS and BT interfaces The PCI Express interface is mainly used for the graphics controller interface to communicate with the host. The graphics controller is a VGA-compliant controller with 2D hardware acceleration and full bus master support. The BMC functionality is implemented with an Integrated ARM9 processor.
Hardware Architecture Intel® Remote Management Module 4 TPS BT Interface SMIC Interface Mailbox Interface Real-Time Clock (RTC) SPI Interface TAP Interface Integrated BMC includes a VGA-compliant graphics controller with hardware acceleration for BLIT and 2D graphics. The graphics controller operates completely independent of the BMC; however it can be disabled by the BMC.
Intel® Remote Management Module 4 TPS 4.3 Hardware Architecture RMM4 Block Diagram RMM4 Block Diagram 128MB FLASH DDR3 Shard NIC BMC 16MB Boot Flash FLASH RJ45 RMII SPI 0 SPI 1 IBMC Zoar MAC 1 MAC 0 RGMII USB 1.1 USB 2.0 Dock Connector or 2X15 Connector 2X4 Pin Header FLASH RMM4 LITE 1Gbe PHY RJ45 RMM4 Dedicated NIC Module Figure 11.
Hardware Architecture Intel® Remote Management Module 4 TPS FLASH FLASH Figure 12. RMM4 Block Diagram (Apply to Intel® Server Boards and Systems Based on Intel® Xeon® Processor E5-2600 (V3) -- S2600WT, S2600KP, S2600TP and S2600CW Product Families) 4.3.1 USB 2.0 (high-speed) Interface A USB 2.0 (high-speed) interface supports the following: Virtual keyboard Virtual mouse Intel® RMM4 - Virtual Media 4.3.
Intel® Remote Management Module 4 TPS Hardware Architecture RMII link to onboard shred NIC PHY and has a RGMII link to the Intel® Dedicated Server Management NIC PHY for data and control. 4.3.3 128-MB DDR3 System Memory The ServerEngines* Pilot III Baseboard Management Controller uses 128-MB DDR3 memory. This memory supports running the embedded Linux operating system and all other embedded firmware. 4.3.
Hardware Architecture Intel® Remote Management Module 4 TPS 17 Pin GND Signal Description 18 Pin Signal Description RXD_0 19 GND 20 RXD_1 21 GND 22 RXD_2 23 GND 24 RXD_3 25 GND 26 TX_CLK 27 GND 28 RX_CLK 29 GND 30 PRESENT 31 Reserved 32 Reserved 33 Reserved 34 Reserved 35 Reserved 36 Reserved 37 Reserved 38 Reserved 39 Reserved 40 Reserved Table 5. DMN Cable Connector (J1A1) Pin-outs Pin 4.
Intel® Remote Management Module 4 TPS LED Dedicated Management NIC Hardware Architecture Color Green Condition On Functionality LAN link and no access Green Blink LAN access Off Idle Activity Table 7.
Hardware Architecture Intel® Remote Management Module 4 TPS assigned to it at the Intel factory. The printed MAC address is assigned to NIC1 on the server board.
Intel® Remote Management Module 4 TPS Advanced Features 5. Advanced Features 5.1 Enabling Advanced Management Features The Advanced management features are to be delivered as part of the Integrated BMC FW image. The Integrated BMC’s baseboard SPI flash contains code/data for both the Basic and Advanced features. An optional add-in card Intel® RMM4 Lite is used as the activation mechanism. When the BMC FW initializes, it attempts to access the Intel® RMM4 Lite.
Advanced Features 5.2 Intel® Remote Management Module 4 TPS Keyboard, Video, Mouse (KVM) Redirection The Integrated BMC firmware supports keyboard, video, and mouse redirection (KVM) over LAN. This feature is available remotely from the embedded web server as a Java* applet. This feature is only enabled when the Intel® RMM4 Lite is present. The client system must have a Java* Runtime Environment (JRE) version 6 or later to run the KVM or media redirection applets.
Intel® Remote Management Module 4 TPS 5.2.2 Advanced Features Performance The remote display accurately represents the local display. The feature adapts to changes to the video resolution of the local display and continues to work smoothly when the system transitions from graphics to text or vice-versa. The responsiveness may be slightly delayed depending on the bandwidth and latency of the network. Enabling KVM and/or media encryption will degrade performance.
Advanced Features Intel® Remote Management Module 4 TPS At least two concurrent remote KVM sessions are supported. It is possible for at least two different users to connect to same server and start remote KVM sessions. 5.3 Media Redirection The embedded web server provides a Java* applet to enable remote media redirection. This may be used in conjunction with the remote KVM feature, or as a standalone applet.
Intel® Remote Management Module 4 TPS Advanced Features If either a virtual IDE or virtual floppy device is remotely attached during system boot, both the virtual IDE and virtual floppy are presented as bootable devices. It is not possible to present only a single-mounted device type to the system BIOS. 5.3.1 Availability The default inactivity timeout is 30 minutes and is not user-configurable. Media redirection sessions persist across system reset but not across an AC power loss or BMC reset. 5.
Glossary Intel® Remote Management Module 4 TPS Glossary Word/Acronym ARP Address resolution protocol BMC Baseboard Management Controller CLI Command line interface DDC Display Data Channel DHCP Dynamic Host Configuration Protocol DMN Dedicated Management Nic DVC Dambrackas Video Compression DVO Dynamic Visual Output FPGA Field Programmable Gate Array ICMP Internet Control Message Protocol Intel® RMM4 Intel® Remote Management Module 4 Intel® RMM4 Lite Intel® Remote Management Module