Server WHQL Testing Services Enterprise Platforms and Services Division Intel® Server Board S5000PSLSASR Server Test Submission (STS) Report For the Microsoft® Windows® Logo Program (WLP) Rev 2.0 April 8, 2008 This report describes the Intel® S5000PSLSASR Server Platform Windows* Logo Program test run conducted by Intel Enterprise Platforms and Services Division (EPSD).
Revision History and Disclaimers S5000PSLSASR Revision History and Disclaimers Revision History Revision Date Comments 1.0 11/6/2007 Internal draft of the STS Report for Windows Server 2003 Submission for Intel® Server Board S5000PSLSASR. 2.0 4/3/2008 Internal draft of the STS Report for Windows Server 2008 Submission for Intel® Server Board S5000PSLSASR.
S5000PSLSASR Contents Contents Revision History and Disclaimers ..................................................................... 2 Introduction ......................................................................................................... 4 Overview of Contents.............................................................................................................. 4 Terms and Definitions ..................................................................................................
Introduction S5000PSLSASR Introduction This report provides an overview of the testing conducted on the Intel® Server Board S5000PSLSASR by Intel EPSD and provides details about this testing run. Overview of Contents Section Content Introduction Brief descriptions of the sections in the report. Table listing terms and definitions.
S5000PSLSASR Server Board Submission Information Server Board Submission Information Intel Server Board Submission Report: Completion of WLP Data in this section reflects system submission information at the time of WLP Update submission.
Server Board Submission Information S5000PSLSASR Server Board Configuration Information Processor Quantity 2 (physical processors installed) Front Side Bus Speed 1333 MHz Family/Model Intel Xeon Quad-core and Dual-Core processors Speed 2.67, 2.80, 3.0, 3.16, 3.20, and 3.
S5000PSLSASR Server Board Submission Information Bus Types Check all that Apply 5 PS/2 Check all that Apply AGP* 1394 PCCard* (16-bit) CF (Compact Flash) CardBus* (32-bit) 5 PCI USB Mini-PCI USB 2.
Server Board Submission Information I/O Accelerated Technology S5000PSLSASR Windows Server 2008 1.2.79.9 (Pkg 12.4) Windows Server 2008 – 64Bit 1.2.79.9 (Pkg 12.4) Windows Server 2008 Display ATI* ES1000 SVGA PCI video controller with 16 MB of video memory Windows Server 2008 – 64Bit 8.240.50.3000 8.240.50.3000 Intel® ESG-SHV backplane Windows Server 2008 5.00.6055.2 (Null driver) Windows Server 2008 – 64Bit 5.00.6055.
S5000PSLSASR Hardware Compatibility Tests Used Hardware Compatibility Tests Used Microsoft* Windows Hardware Driver Central Server Testing Home Page: http://www.microsoft.com/whdc/winlogo/wlk/default.mspx Please check this website regularly for test kit updates. Operating Systems Notes Hardware Compatibility Tests (HCT) Windows Server 2008 DTM 1.1 Test Procedures and Readme files for Windows XP SP2, Windows vista, Windows Server 2003, and Windows Server 2008 (4.95MB) DTM 1.
Errata and Contingencies S5000PSLSASR Errata and Contingencies Microsoft* System DTM Errata list is available at: https://winqual.microsoft.
S5000PSLSASR Errata and Contingencies Testing Exceptions for S5000PSLSASR Windows Server 2008 Data in this section reflects product data and test exceptions listed in section 2 of the S5000PSLSASR Readme file at time of WLP First-Time submission ID Number 1287148. Failure type (Contingency, Errata, Incident) ID number (Windows XP, Windows 2000, etc.
Errata and Contingencies S5000PSLSASR Failure type (Contingency, Errata, Incident) ID number (Windows XP, Windows 2000, etc.
S5000PSLSASR Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) Errata and Contingencies According to the PCI Express Base Specification, Rev 2.0 Section 7.8.8, this bit field is undefined when the link is not up. If there is not PCIe device behind the bridge, then the link can NOT be up and therefore the field is undefined. Bit 13 in the same register (Link Status) can be used to determine if the link is active (up).
Errata and Contingencies Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) S5000PSLSASR The Bit 5 (Surprise Down Error Severity) in the Uncorrectable Error Severity register (offset Ch) in the Advanced Error Reporting Capability table must be read-only and always return 1 if the Bit 5 (Surprise Down Error Mask) in the Uncorrectable Error Mask Register in the Advanced Errror Reporting Capability table is not implemented Additional information (fo
S5000PSLSASR Errata and Contingencies Additional information (for example, test system in a multiple system configuration) Failure type (Contingency, Errata, Incident) ID number (Windows XP, Windows 2000, etc.) Windows Server 2008 x86 Errata 1114 Failing test name PCI Hardware Compliance Test Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) According to the PCI Express Base Specification, Rev 2.0 Section 7.8.
Errata and Contingencies S5000PSLSASR Failure type (Contingency, Errata, Incident) ID number (Windows XP, Windows 2000, etc.) Windows Server 2008 x64 Errata 887 Failing test name PCI Harware Compliance Test for Systems Running Windows Vista (PCIHCT) Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) Bit 10 (Interrupt Disable) in the Command register (offset 4h) in the Header table must be read-writable if the device supports an interrupt.
S5000PSLSASR Errata and Contingencies Windows Server 2008 x64 Errata 331 Failing test name PCI Hardware Compliance Test Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) PCI Compliance - Bit range 31:2 (Message Address)in the Message Address register (offset 4h) in the MSI Capability table must be read-writable. RESOLUTION: The following PCI Compliance test assertion failure is allowed DDC8A893-6F85-4D69-BC79874BA52E0A02.
Errata and Contingencies S5000PSLSASR Failure type (Contingency, Errata, Incident) ID number (Windows XP, Windows 2000, etc.) Windows Server 2008 x64 Errata 1029 Failing test name PCI Hardware Compliance Test Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) Assertion 4BA8F23A-6BB1-48EE-88D8-ED1A3ECD34B9 SSVID register of the Subsystem ID and Subsystem Vendor ID Capability table must be read-only .
S5000PSLSASR Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) Errata and Contingencies PCI Compliance test causes the system to hang after testing Power Management capability of the graphics devices. This occurs after the device are put into various D-states and then recovered to D0 state.
Errata and Contingencies S5000PSLSASR Failure type (Contingency, Errata, Incident) ID number (Windows XP, Windows 2000, etc.) Windows Server 2008 x64 Errata 1115 Failing test name PCI Hardware Compliance Test Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) PCI Compliance - Bit 3 (Read Completion Boundary) in the Link Control register (offset 10h) in the PCI Express Capability table must be read-only and always return 0 for switch ports.
S5000PSLSASR Appendix A – Submission History Appendix A – Submission History ® Microsoft “Designed for Windows*” logo submission history for the Intel Server S5000PSLSASR: Submission ID Type Date OS Qualified Processor Speeds Board Revision BIOS Version 1269631 First-Time 11/5/07 Windows 2003 EE SP2 - 32 & 64 Bit 2.67, 2.80, 3.0, 3.20, and 3.73 GHz 100 S5000.86B.10.00.84 Windows Server 2008 family 32 & 64 bit 2.67, 2.80, 3.0, 3.16, 3.20, and 3.