Server WHQL Testing Services Enterprise Platforms and Services Division Intel® Server Board S5000VSA4DIMM Intel® Server System SR2520SAFR Server Test Submission (STS) Report For the Microsoft® Windows® Logo Program (WLP) Rev 2.0 May 9, 2008 This report describes the Intel® S5000VSA4DIMM Server Platform Windows* Logo Program test run conducted by Intel Enterprise Platforms and Services Division (EPSD).
0BRevision History and Disclaimers Intel® Server System SR2520SAFR Revision History and Disclaimers Revision History Revision Date Comments 1.0 9/8/2006 STS Report for Windows Server 2003 (32-bit only) Submission for Intel Server Board S5000VSA4DIMM. 1.1 10/11/2006 STS Report for Windows Server 2003 (32-bit & 64-bit) Submission for Intel Server Board S5000VSA4DIMM. 2.0 5/9/2008 Internal draft of the STS Report for Windows Server 2008 x64 and x86 Submission for Intel® Server Board S5000VSA4DIMM.
Intel® Server System SR2520SAFR Contents Contents Revision History and Disclaimers ..................................................................... 2 Introduction ......................................................................................................... 4 Overview of Contents.............................................................................................................. 4 Terms and Definitions ...............................................................................
1BIntroduction Intel® Server System SR2520SAFR Introduction This report provides an overview of the testing conducted on the Intel® Server Board S5000VSA4DIMM by Intel EPSD and provides details about this testing run. Overview of Contents Section Content Introduction Brief descriptions of the sections in the report. Table listing terms and definitions.
Intel® Server System SR2520SAFR 2BServer Board Submission Information Server Board Submission Information Intel Server Board Submission Report: Completion of WLP Data in this section reflects system submission information at the time of WLP Update submission.
2BServer Board Submission Information Intel® Server System SR2520SAFR Server Board Configuration Information Processor Quantity 2 (physical processors installed) Front Side Bus Speed 1333 MHz Family/Model Intel Xeon Quad-core and Dual-Core processors Speed 2.67, 2.80, 3.0, 3.16, 3.20, and 3.
Intel® Server System SR2520SAFR 2BServer Board Submission Information Bus Types Check all that Apply 5 PS/2 Check all that Apply AGP* 1394 PCCard* (16-bit) CF (Compact Flash) CardBus* (32-bit) 5 PCI USB Mini-PCI USB 2.
2BServer Board Submission Information Display ATI* ES1000 SVGA PCI video controller with 16 MB of video memory Intel® Server System SR2520SAFR Windows Server 2008 – 64-bit 8.240.50.3000 8.240.50.3000 Intel® ESG-SHV backplane Windows Server 2008 – 32-bit 6.0.6001.18000 (Null driver) Windows Server 2008 – 64-bit 6.0.6001.18000 Windows Server 2008 – 32-bit Product Data for HCL: Completion of WLP Data in this section reflects product data for HCL at time of WLP submission.
Intel® Server System SR2520SAFR 3BHardware Compatibility Tests Used Hardware Compatibility Tests Used Microsoft* Windows Hardware Driver Central Server Testing Home Page: http://www.microsoft.com/whdc/winlogo/wlk/default.mspx Please check this website regularly for test kit updates. Operating Systems Notes Hardware Compatibility Tests (HCT) Windows Server 2008 DTM 1.2 Test Procedures and Readme files for Windows XP SP2, Windows vista, Windows Server 2003, and Windows Server 2008 (4.95MB) DTM 1.
4BErrata and Contingencies Intel® Server System SR2520SAFR All testing exceptions must be identified with a valid Errata ID, Incident ID, or Contingency ID provided by WHQL. The new Microsoft standardized Readme file is available for download at: http://www.microsoft.com/whdc/winlogo/WLK/default.
Intel® Server System SR2520SAFR 4BErrata and Contingencies Additional information (for example, test system in a multiple system configuration) Operating system Failure type (Contingency, Errata, Incident) ID number (Windows XP, Windows 2000, etc.
4BErrata and Contingencies Operating system Intel® Server System SR2520SAFR Failure type (Contingency, Errata, Incident) ID number (Windows XP, Windows 2000, etc.
Intel® Server System SR2520SAFR 4BErrata and Contingencies Failing test name PCI Hardware Compliance Test Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) PCI Compliance test causes the system to hang after testing Power Management capability of the graphics devices. This occurs after the device are put into various D-states and then recovered to D0 state.
4BErrata and Contingencies Intel® Server System SR2520SAFR Additional information (for example, test system in a multiple system configuration) Failure type (Contingency, Errata, Incident) ID number (Windows XP, Windows 2000, etc.) Windows Server 2008 x86 Errata 474 Failing test name PCI Hardware Compliance Test Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) According to the PCI Express Base Specification, Rev 2.0 Section 7.8.
Intel® Server System SR2520SAFR 4BErrata and Contingencies Failure type (Contingency, Errata, Incident) ID number (Windows XP, Windows 2000, etc.) Windows Server 2008 x64 Errata 1029 Failing test name PCI Hardware Compliance Test Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) Assertion 4BA8F23A-6BB1-48EE-88D8-ED1A3ECD34B9 SSVID register of the Subsystem ID and Subsystem Vendor ID Capability table must be read-only .
4BErrata and Contingencies Intel® Server System SR2520SAFR Additional information (for example, test system in a multiple system configuration) Failure type (Contingency, Errata, Incident) ID number (Windows XP, Windows 2000, etc.
Intel® Server System SR2520SAFR 4BErrata and Contingencies Failing test name PCI Hardware Compliance Test Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) PCI Compliance - Bit 3 (Read Completion Boundary) in the Link Control register (offset 10h) in the PCI Express Capability table must be read-only and always return 0 for switch ports.
4BErrata and Contingencies Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) Intel® Server System SR2520SAFR Assertion 7A5587BC-5646-4DC4-9A5D-22F85AB2204E: FAILED. PCI Express ports and bridges must implement Subsystem ID and Subsystem Vendor ID Capability.
Intel® Server System SR2520SAFR Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) 4BErrata and Contingencies According to the PCI Express Base Specification, Rev 2.0 Section 7.8.8, this bit field is undefined when the link is not up. If there is not PCIe device behind the bridge, then the link can NOT be up and therefore the field is undefined. Bit 13 in the same register (Link Status) can be used to determine if the link is active (up).
5BAppendix A – Submission History Intel® Server System SR2520SAFR Appendix A – Submission History ® Microsoft “Designed for Windows*” logo submission history for the Intel Server S5000VSA4DIMM: Submission ID Type Date OS Qualified Processor Speeds Board Revision BIOS Version 1208828 First-time 9/8/06 Windows 2003 EE SP2 - 32 & 64 Bit 2.67, 2.80, 3.0, 3.20, and 3.73 GHz 501 S5000.86B.03.00.57 Windows 2003 EE SP2 – 32-bit 2.67, 2.80, 3.0, 3.20, and 3.