Technical Product Specification

ManualsBrandsIntel ManualsOtherIntel Server Board S5520HCT

Intel® Remote Management Module 3

Intel order number E63789-002

Revision 1.1

May, 2010

Enterprise Platforms and Services Division – Marketing

Summary of content (20 pages)

PAGE 1
Intel® Remote Management Module 3 Technical Product Specification Intel order number E63789-002 Revision 1.
PAGE 2
Revision History Intel® Remote Management Module 3 Revision History Date March, 2009 Revision Number 1.0 Modifications Initial release May, 2010 1.1 Updated RMM3 Lite and RMM3 Lite-V Disclaimers ® Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document.
PAGE 3
Intel® Remote Management Module 3 Table of Contents Table of Contents 1. Introduction .......................................................................................................................... 1 2. Product Overview ................................................................................................................. 2 2.1 Virtual Presence ....................................................................................................... 2 2.2 Firmware Feature Set .....
PAGE 4
List of Tables Intel® Remote Management Module 3 List of Tables Table 1. RMM3 Connector Pin-out ............................................................................................... 5 Table 2. Supported Video Resolutions and Refresh Rates ........................................................ 12 iv Intel order number E63789-002 Revision 1.
PAGE 5
Intel® Remote Management Module 3 1. Introduction Introduction This Technical Product Specification (TPS) provides details about the architecture and feature set of the Intel® Remote Management Module 3 (Intel® RMM3)，and its two variations - Intel® Remote Management Module 3 Lite (Intel® RMM3 Lite) and Intel® Remote Management Module 3 Lite-v (Intel® RMM3 Lite-v) .
PAGE 6
Product Overview 2. Intel® Remote Management Module 3 Product Overview The Intel® RMM3 is a 1.23-inch x 2.30-inch printed circuit board. When installed onto the Intel® RMM connector on Intel® server boards, it provides an increased level of manageability over basic server management available to the server board. Designed to work with the Integrated Baseboard Management Controller (BMC), this small form-factor mezzanine card enables graphical server control from anywhere, at anytime.
PAGE 7
Intel® Remote Management Module 3  2.3 Product Overview Highest security standards using up to 256-bit SSLv3, Certificate Management, Event Logging, and State-of-the-Art authentication methods Web Front-end The Intel® RMM3 module features an embedded operating system and application offering a variety of standard interfaces. These interfaces are accessed using the TCP/IP protocol family, and therefore, they can be accessed using the built-in Ethernet adapter.
PAGE 8
Product Overview Intel® Remote Management Module 3 Once mounted, the media that is remote to the server appears local to the server. This allows administrators to install software or drivers on the server, or boot the server from the remote media.
PAGE 9
Intel® Remote Management Module 3 Product Overview  Hardware Video Compression for text and graphics  Hardware encryption  2D Graphics Acceleration  DDR2 graphics memory interface  Up to 1600x1200 pixel resolution  PCI Express* x1 support The Intel® RMM3 connects to the Intel® RMM connector on the Intel® server board via the iPN D16503-004, Amphenol G845B034211, or equivalent connector on the server board. Table 1.
PAGE 10
Product Overview Pin 2.7 2.7.1 Intel® Remote Management Module 3 1 Key Signal Name 2 Pin Signal Name SPI_IBMC_BK_CS_N 3 P3V3_AUX 4 SPI_IBMC_BK_DO 5 GND 6 SPI_IBMC_BK_CLK 7 FM_RMM3_PRESENT_N 8 SPI_IBMC_BK_DI Physical Dimensions Intel® RMM3 Dimensions The Intel® RMM3 is a 1.23” x 2.30” x 0.062” thick printed circuit board that mounts to the system chassis via a mounting bracket. On Intel rack-mounted systems, space is provided to mount the Intel® RMM3 directly to the chassis.
PAGE 11
Intel® Remote Management Module 3 Revision 1.
PAGE 12
Product Overview 2.7.2 Intel® Remote Management Module 3 RMM3 Lite Dimensions RMM3 Lite is a 0.669”x0.925”x0.039 printed circuit board that can mount to server board directly. 8 Intel order number E63789-002 Revision 1.
PAGE 13
Intel® Remote Management Module 3 2.7.3 Product Overview RMM3 Lite-V Dimensions RMM3 Lite-V is a 0.702”x0.899”x0.039” printed circuit board that can mount to server board directly. Revision 1.
PAGE 14
Board Architecture 3. Intel® Remote Management Module 3 Board Architecture The Intel® RMM3 interfaces via the 34-pin header to the Integrated Baseboard Management Controller (BMC) at the interfaces shown in the following block diagram. Integrated BMC Block Diagram Interrupt Controller Fan Tach (12) PWM (4) Ethernet MAC with RMII (2) ADC Thermal USB to Host BMC Boot BMC Data Flash Flash USB 1.1 & USB 2.
PAGE 15
Intel® Remote Management Module 3 3.2 Board Architecture RMII Interface The Reduced Media Independent Interface (RMII) is a standard for communication between an Ethernet MAC (Media Access Controller) device and an Ethernet PHY (Physical layer interface) ® device. The Intel RMM3 utilizes 8 pins for data and control. 3.3 64-MB SDRAM System Memory The ServerEngines* Pilot II Baseboard Management Controller uses a 64-MB SDRAM chip.
PAGE 16
Electrical Specifications Intel® Remote Management Module 3 4. Electrical Specifications 4.1 3.3 V Auxiliary Operation The server board generates the 3.3 V auxiliary supply from the system’s 5 V standby power rail when the system is off. Certain other devices on the server board also operate on 5V standby power to provide complete management functionality. When system power is on, the server board generates this power from the 3.3 V system power rail.
PAGE 17
Intel® Remote Management Module 3 Electrical Specifications Width Height Vertical Rate 800 800 800 800 800 800 800 800 800 800 600 600 600 600 600 600 600 600 600 600 60 72 72 72 75 75 75 85 85 85 Bits/Pixel 32 8 16 32 8 16 32 8 16 32 Horizontal Frequency (kHz) 37.9 48.1 48.1 48.1 46.9 46.9 46.9 53.7 53.7 53.7 Pixel Frequency (mHz) 40.000 50.000 50.000 50.000 49.500 49.500 49.500 56.250 56.250 56.250 48.4 48.4 48.4 56.5 56.5 56.5 60.0 60.0 60.0 68.7 68.7 68.7 65.000 65.000 65.000 75.000 75.
PAGE 18
Electrical Specifications Intel® Remote Management Module 3 Width Height Vertical Rate 1440 900 85 Bits/Pixel 16 Horizontal Frequency (kHz) 84.8 Pixel Frequency (mHz) 157.000 75.0 75.0 81.3 81.3 87.5 87.5 93.8 106.3 162.000 162.000 175.500 175.500 189.000 189.000 202.500 229.500 65.3 65.3 74.9 74.9 93.9 146.250 146.250 187.000 187.000 214.
PAGE 19
Intel® Remote Management Module 3 Network Connections and Authentication 5. Network Connections and Authentication 5.1 Network Connectivity The Intel® RMM3 requires Ethernet connectivity. Therefore, an Ethernet PHY is installed on the Intel® RMM3. This enables the Intel® RMM3 to manage these network functions:  Dynamic Host Configuration Protocol (DHCP)  Address Resolution Protocol (ARP)  Internet Control Message Protocol (ICMP)  TCP/IP 5.1.
PAGE 20
Glossary Intel® Remote Management Module 3 Glossary Word / Acronym ARP BMC Baseboard Management Controller CLI Command line interface DDC Display Data Channel DHCP Dynamic Host Configuration Protocol DVC Dambrackas Video Compression DVO Dynamic Visual Output FPGA Field Programable Gate Array ICMP Internet Control Message Protocol ® 16 Definition Address resolution protocol ® Intel RMM3 Intel Remote Management Module 3 IPMI Intelligent Platform Management Interface ITE Information