Server WHQL Testing Services Enterprise Platforms and Services Division Intel® Server Board S5000VSASASR Intel® Server System SR2520SAXSR Server Test Submission (STS) Report For the Microsoft® Windows® Logo Program (WLP) Rev 2.1 Mar 9, 2008 This report describes the Intel® S5000VSASASR Server Platform Windows* Logo Program test run conducted by Intel Enterprise Platforms and Services Division (EPSD).
0BRevision History and Disclaimers Intel® Server System SR2520SAXSR Revision History and Disclaimers Revision History Revision Date Comments 1.0 11/1/2007 Internal draft of the STS Report for Windows Server 2003 Submission for Intel® Server Board S5000VSASASR. 2.0 4/18/2008 Internal draft of the STS Report for Windows Server 2008 x64 (with Windows Server 2008 x86 “Supported”) Submission for Intel® Server Board S5000VSASASR. 2.
Intel® Server System SR2520SAXSR Contents Contents Revision History and Disclaimers ..................................................................... 2 Introduction ......................................................................................................... 4 Overview of Contents.............................................................................................................. 4 Terms and Definitions ..............................................................................
1BIntroduction Intel® Server System SR2520SAXSR Introduction This report provides an overview of the testing conducted on the Intel® Server Board S5000VSASASR by Intel EPSD and provides details about this test run. Overview of Contents Section Content Introduction Brief descriptions of the sections in the report. Table listing terms and definitions.
Intel® Server System SR2520SAXSR 2BServer Board Submission Information Server Board Submission Information Intel Server Board Submission Report: Completion of WLP Data in this section reflects system submission information at the time of WLP Update submission.
2BServer Board Submission Information Intel® Server System SR2520SAXSR Server Board Configuration Information Processor Quantity 2 (physical processors installed) Front Side Bus Speed 1333 MHz Family/Model Intel Xeon Quad-core and Dual-Core processors Speed 2.67, 2.80, 3.0, 3.16, 3.20, and 3.
Intel® Server System SR2520SAXSR 2BServer Board Submission Information Bus Types Check all that Apply 5 PS/2 Check all that Apply AGP* 1394 PCCard* (16-bit) CF (Compact Flash) CardBus* (32-bit) 5 PCI USB Mini-PCI USB 2.
2BServer Board Submission Information I/O Accelerated Technology Display ATI* ES1000 SVGA PCI video controller with 16 MB of video memory Intel® ESG-SHV backplane (Null driver) Intel® Server System SR2520SAXSR Windows Server 2008 1.2.79.9 (PKg 12.4) Windows Server 2008 – 64Bit 1.2.79.9 (PKg 12.4) Windows Server 2008 8.240.50.3000 8.240.50.3000 Windows Server 2008 – 64Bit Windows Server 2008Windows Server 2008 – 64Bit 6.0.6001.18000 6.0.6001.
Intel® Server System SR2520SAXSR 3BHardware Compatibility Tests Used Hardware Compatibility Tests Used Microsoft* Windows Hardware Driver Central Server Testing Home Page: http://www.microsoft.com/whdc/winlogo/wlk/default.mspx Please check this website regularly for test kit updates. Operating Systems Notes Hardware Compatibility Tests (HCT) Windows Server 2008 DTM 1.1 Test Procedures and Readme files for Windows XP SP2, Windows vista, Windows Server 2003, and Windows Server 2008 (4.95MB) DTM 1.
4BErrata and Contingencies Intel® Server System SR2520SAXSR Errata and Contingencies Microsoft* System DTM Errata list is available at: https://winqual.microsoft.
Intel® Server System SR2520SAXSR Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) 4BErrata and Contingencies Assertion 4BA8F23A-6BB1-48EE-88D8-ED1A3ECD34B9 SSVID register of the Subsystem ID and Subsystem Vendor ID Capability table must be read-only . Assertion 6B0F606E-DBB3-4B8C-887932B302412EB8 SSID register of the Subsystem ID and Subsystem Vendor ID Capability table must be read-only .
4BErrata and Contingencies Intel® Server System SR2520SAXSR Failure type (Contingency, Errata, Incident) ID number (Windows XP, Windows 2000, etc.) Windows Server 2008 x86 Errata 1113 Failing test name PCI Hardware Compliance Test Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) Bit 5 (Retrain Link) in the Link Control register (offset 10h) in the PCI Express Capability table must always return 0 on reads even though it is read-write.
Intel® Server System SR2520SAXSR Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) 4BErrata and Contingencies PCI Compliance - Bit 3 (Read Completion Boundary) in the Link Control register (offset 10h) in the PCI Express Capability table must be read-only and always return 0 for switch ports.
4BErrata and Contingencies Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) Intel® Server System SR2520SAXSR Assertion 7A5587BC-5646-4DC4-9A5D-22F85AB2204E: FAILED. PCI Express ports and bridges must implement Subsystem ID and Subsystem Vendor ID Capability.
Intel® Server System SR2520SAXSR Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) 4BErrata and Contingencies According to the PCI Express Base Specification, Rev 2.0 Section 7.8.8, this bit field is undefined when the link is not up. If there is not PCIe device behind the bridge, then the link can NOT be up and therefore the field is undefined. Bit 13 in the same register (Link Status) can be used to determine if the link is active (up).
4BErrata and Contingencies Intel® Server System SR2520SAXSR Additional information (for example, test system in a multiple system configuration) Failure type (Contingency, Errata, Incident) ID number (Windows XP, Windows 2000, etc.
Intel® Server System SR2520SAXSR 4BErrata and Contingencies Failure type (Contingency, Errata, Incident) ID number (Windows XP, Windows 2000, etc.) Windows Server 2008 x64 Errata 566 Failing test name PCI Hardware Compliance Test Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) Assertion 7A5587BC-5646-4DC4-9A5D-22F85AB2204E: FAILED. PCI Express ports and bridges must implement Subsystem ID and Subsystem Vendor ID Capability.
4BErrata and Contingencies Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) Intel® Server System SR2520SAXSR Assertion 4BA8F23A-6BB1-48EE-88D8-ED1A3ECD34B9 SSVID register of the Subsystem ID and Subsystem Vendor ID Capability table must be read-only . Assertion 6B0F606E-DBB3-4B8C-887932B302412EB8 SSID register of the Subsystem ID and Subsystem Vendor ID Capability table must be read-only .
Intel® Server System SR2520SAXSR 4BErrata and Contingencies Failure type (Contingency, Errata, Incident) ID number (Windows XP, Windows 2000, etc.) Windows Server 2008 x64 Errata 1113 Failing test name PCI Hardware Compliance Test Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) Bit 5 (Retrain Link) in the Link Control register (offset 10h) in the PCI Express Capability table must always return 0 on reads even though it is read-write.
4BErrata and Contingencies Intel® Server System SR2520SAXSR Additional information (for example, test system in a multiple system configuration) Additional Information No additional information entered in section 3 of the Intel® Server System SR2520SAXSR Readme file at time of WLP submission ID 1290328.
Intel® Server System SR2520SAXSR 5BAppendix A – Submission History Appendix A – Submission History ® Microsoft “Designed for Windows*” logo submission history for the Intel Server S5000VSASASR: Submission ID Type Date OS Qualified Processor Speeds Board Revision BIOS Version 1280348 First-Time 2/4/2008 Windows 2003 EE SP2 - 32 & 64 Bit 2.67, 2.80, 3.0, 3.20, and 3.73 GHz 100 S5000.86B.10.00.84 Windows Server 2008 family 64-bit 2.67, 2.80, 3.0, 3.16, 3.20, and 3.