Intel® Server Chassis SC5400 5U Kit Technical Product Specification Intel reference number D60250-001 Revision: 1.
Table of Contents Intel® Server Chassis SC5400 5U Kit TPS Revision History Date May 13, 2006 Revision Number 1.0 Modifications Initial Draft Disclaimers Information in this document is provided in connection with Intel® products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document.
Intel® Server Chassis SC5400 5U Kit TPS Table of Contents Table of Contents 1. 2. Introduction .......................................................................................................................... 1 1.1 Intel® Server Chassis SC5400 Design Features..................................................... 1 1.2 Intel® Server Chassis SC5400BASE Summary ...................................................... 3 1.3 Intel® Server Chassis SC5400BRP Summary .................................
Table of Contents 4.5 5. Fan Header Connector Descriptions ..................................................................... 23 Chassis Power Subsystem................................................................................................ 24 5.1 670W Power Supply .............................................................................................. 24 5.1.1 670W Mechanical Outline...................................................................................... 24 5.1.
Intel® Server Chassis SC5400 5U Kit TPS Table of Contents 6.1.2 General Purpose Input/Output (GPIO) .................................................................. 55 6.1.3 External Memory Device........................................................................................ 56 6.1.4 LEDs ...................................................................................................................... 56 6.1.5 SAS/SATA Drive Connectors ................................................
Table of Contents 7.1.8 Intel® Server Chassis SC5400 5U Kit TPS SGPIO Cable for 6-Drive Bays (4-pin) ................................................................... 81 8. System-Compatible Server Boards .................................................................................. 82 9. Upgrade Accessories......................................................................................................... 83 9.1 SAS/SATA Hot Swap Drive Bays - AXX6DRV3G and AXX4DRV3G ....................
Intel® Server Chassis SC5400 5U Kit TPS List of Figures List of Figures Figure 1. Intel® Server Chassis SC5400BASE Components ....................................................... 3 Figure 2. Intel® Server Chassis SC5400LX Components ............................................................ 4 Figure 3. Bezel Assembly ............................................................................................................. 7 Figure 4. Rack Configuration .............................................
List of Figures Intel® Server Chassis SC5400 5U Kit TPS Figure 33. USB Connector.......................................................................................................... 78 Figure 34. Hot Swap Fan Cable.................................................................................................. 79 Figure 35. Hot Swap Fan 6-pin Cable Connector ....................................................................... 79 Figure 36. Hot Swap 8-pin Fan Cable Connectors .....................
Intel® Server Chassis SC5400 5U Kit TPS List of Tables List of Tables Table 1. Intel® Server Chassis SC5400BASE, SC5400BRP, and SC5400LX Features.............. 1 Table 2. Product Matrix................................................................................................................. 5 Table 3. Chassis Dimensions and Weights .................................................................................. 6 Table 4. System Color Code..........................................................
List of Tables Intel® Server Chassis SC5400 5U Kit TPS Table 33. Power Signal Connector ............................................................................................. 45 Table 34. 12V4 Power Connector............................................................................................... 45 Table 35. Peripheral Power Connectors ..................................................................................... 45 Table 36. SATA Power Connector.......................................
Intel® Server Chassis SC5400 5U Kit TPS 1. Introduction Introduction This specification details the feature set of the Intel® Server Chassis SC5400, a server chassis designed for Intel® server board products. The Intel® Server Chassis SC5400 series of products are low cost, quick to integrate, and allow utilization of multiple platforms and configurations.
Introduction Intel® Server Chassis SC5400BASE Intel® Server Chassis SC5400BRP Seven full-length PCI slots Seven full-length PCI slots Seven full-length PCI slots. Form Factor 5U Tower, convertible to rack mount 5U Tower, convertible to rack mount 5U Tower, convertible to rack mount Front Panel LEDs for NIC1, NIC2, System ID, HDD activity and system status.
Intel® Server Chassis SC5400 5U Kit TPS Intel® Server Chassis SC5400BASE Customization Panels Unpainted Rack Top Cover Slim Line CDROM/USB Floppy Kit 1.
Introduction 1.3 Intel® Server Chassis SC5400 5U Kit TPS Intel® Server Chassis SC5400BRP Summary The Intel® Server Chassis SC5400BRP supports the redundant power capability of the Intel® Server Chassis SC5400LX configuration and the fixed fan features of the Intel® Server Chassis SC5400BASE configuration. The Intel® Server Chassis SC5400BRP configuration includes a single 830W PFC power supply module. Two tachometer output fans are mounted in front of the server board.
Intel® Server Chassis SC5400 5U Kit TPS 1.5 Introduction Product Matrix The supported upgrades and optional accessories for the Intel® Server Chassis SC5400 are shown in the product matrix in Table 2. Table 2.
Intel® Server Chassis SC5400 5U Kit TPS 2. Chassis Features 2.1 Chassis Dimensions and Weight Shipping weights include packaging. Complete systems configured with server board, accessories and hard disk drives will have varying weights. Table 3. Chassis Dimensions and Weights Configuration 2.2 Pedestal Rack Height 17 inches (43.2 cm) 8.6 inches (21.8 cm) Width 8.6 inches (21.8 cm) 16.6 inches (42.2 cm) Depth 28.4 inches (70.9 cm) 27.4 inches (69.6 cm) Clearance front Ten inches (25.
Intel® Server Chassis SC5400 5U Kit TPS 2.3 Chassis Features Pedestal Front Bezel The standard pedestal front bezel is a molded plastic door covering all drive bays. A key lock is provided to prevent unauthorized access to the peripheral bays. A molded plastic sub-bezel is located on the face of the chassis under the front bezel. The sub-bezel houses the front panel buttons and light pipes for the front panel indicators.
Chassis Features 2.4 Intel® Server Chassis SC5400 5U Kit TPS Rack Mount Configuration In the rack mount configuration, the front door is removed and the sub-bezel becomes the front panel for the rack mount system. The drive bays and bezel icons are rotated 90° to have the correct orientation. The rack mount kit includes the chassis slides, rack handles, front door hinge cover plate and icon label. Figure 4. Rack Configuration 2.
Intel® Server Chassis SC5400 5U Kit TPS 2.6 Chassis Features I/O Panel All input/output (I/O) connectors are accessible on the rear of the chassis. The SSI E-bay 3.5compliant chassis provides an ATX* 2.03-compatible cutout for I/O shield installation. Boxed server boards provide the required I/O shield for installation in the cutout. The I/O cutout dimensions are shown in the figure below. The rear I/O panel conforms to the Advanced Technology Extended (ATX) Specification, Revision 2.
Chassis Features 2.7.1 Intel® Server Chassis SC5400 5U Kit TPS Hot Swap Drive Bays Each hard drive must be mounted to a hot-swap drive tray, making insertion and extraction of the drive from the chassis very simple. Each drive tray has its own dual-purpose latching mechanism that is used to both insert and extract drives from the chassis and lock the tray in place.
Intel® Server Chassis SC5400 5U Kit TPS 2.7.2 Chassis Features Drive Blanks Drive blanks must be used when no drive is used in a hard drive bay. Drive blanks simulate the spatial volume of a hard disk that is required to maintain proper air pressure limits necessary to cool the system. Figure 8. Drive Bay with Drive Blank Revision: 1.
Chassis Features 2.8 Intel® Server Chassis SC5400 5U Kit TPS 5.25-inch Half-height Peripheral Bays Three 5.25 inch, half-height drive bays are available for installation of a floppy1 drive, CD-ROM drive or tape drive. The chassis ships with a 3.5 inch fixed drive adapter bracket, installed in the top 5.25-inch drive bay, and two empty 5.25 inch drive bays. Tool-less mounting rails are included for all three-drive bays and attach without screws.
Intel® Server Chassis SC5400 5U Kit TPS 3. Front Panel Front Panel The Intel® Server Chassis SC5400 provides a 24-pin cable option with the chassis kit. A 24-pin Entry Ebay SSI (rev 3.61) front panel header for Intel® server boards is located on the back of the front panel. This allows for connection of a 24-pin ribbon cable for use with SSI rev 3.61compliant server boards. The front panel features control buttons and LED indicators. The LEDs are visible with the pedestal exterior access door closed.
Front Panel 3.2 Intel® Server Chassis SC5400 5U Kit TPS Front Panel Connectors Front panel connectors are listed in the following table. Table 5. Front Panel Connector Designations Designator 3.2.1 JP2 Header Size 17x2 Description Front panel SSI Connector JP3 2x1 Intrusion or front panel key switch 24-pin EEB SSI Compliance Connector Pin-out A 24-pin Entry Ebay SSI (rev 3.61) front panel header is located on the back of the front panel.
Intel® Server Chassis SC5400 5U Kit TPS Front Panel Pin 3.3 Signal 22 NIC2_ACT_LED_N 23 FP_NMI_BTN_N 24 NIC2_LINK_LED_N Front Panel Controls and Indicators The front panel control buttons and LED indicators are displayed in the following figure. The tool-activated non-maskable Interrupt (NMI) switch is located below the Status Fault LED. When the hot swap drive bay is installed, a bi-color hard drive LED is located on each drive carrier (six total) to indicate specific drive failure or activity.
Front Panel Intel® Server Chassis SC5400 5U Kit TPS Front panel buttons and indicator LED’s function are shown in the following table. Table 7. Front Panel LED Functions Condition1 On Power On Green Blink Sleep S1/S3 Off Off (also Sleep S4/S5) Off N/A AC power off Green / Amber Alternating Blink Pre DC Power On – 15-20 second BMC Initialization when AC is applied to the server. Control Panel buttons are disabled until BMC initialization is complete.
Intel® Server Chassis SC5400 5U Kit TPS 3.3.1 Front Panel Power / Sleep LED The green power LED is active when system DC power is on. The power LED is controlled by the BIOS. The power LED reflects a combination of the state of system (DC) power and the system ACPI state. Table 8 shows the states that can be assumed Table 8. Power LED Operation.
Front Panel 3.3.2.2 Intel® Server Chassis SC5400 5U Kit TPS Non-Critical Conditions A non-critical condition is a threshold crossing associated with the following events: 3.3.2.
Intel® Server Chassis SC5400 5U Kit TPS 4. System Cooling System Cooling Two cooling solutions are employed in the Intel® Server Chassis SC5400. The base solution consists of two fixed fans (92mm and 120mm) to provide sufficient system cooling. The second redundant solution is designed for maximum up time by providing four replaceable hot-swap fans (92mm and 120mm). The fans can maintain proper system cooling, even with a single failed fan.
System Cooling 4.2 Intel® Server Chassis SC5400 5U Kit TPS Base Cooling Solution One 120 x 38mm fan and one 92 x 38mm fan provide cooling for the processors, hard drives, and add-in cards. These two fans draw air through the rear of each hard drive bay to provide drive cooling. In addition, the power supply fan provides cooling for the power supply. Figure 13. Fixed Fan Mounting 20 Revision: 1.
Intel® Server Chassis SC5400 5U Kit TPS 4.3 System Cooling Redundant Cooling Solution Two hot swap 120x38mm fans and two hot swap 92x38mm fans provide cooling for the processors, hard drives and add-in cards. The two 120x38mm fans ensure proper cooling of the core area (processors and memory) and the hot swap drive bay. The two 92x38mm fans provide cooling for the PCI card area. When any single fan fails, the remaining fans will increase in speed and maintain cooling until the failed unit is replaced.
System Cooling Intel® Server Chassis SC5400 5U Kit TPS The figure below shows the airflow characteristics through the Intel® Server Chassis SC5400. Figure 15. Redundant Chassis Airflow Characteristics 4.4 Fan Control The fans in the Intel® Server Chassis SC5400 are designed for server boards that support fan control via a PWM control signal. 4.4.1 Basic Fan Control (All fans) The front panel of the chassis has an active temperature sensor (i.e.
Intel® Server Chassis SC5400 5U Kit TPS 4.5 System Cooling Fan Header Connector Descriptions All system fan headers use pulse width modulated (PWM) fans for cooling the processors in the chassis. PWM fans have an improved RPM range (20% to 100% rated fan speed) when compared to voltage controlled fans. Base Chassis Fans are a 4-wire/4-pin style designed to plug into 4-pin or 6-pin SSI Fan headers.
Chassis Power Subsystem 5. Intel® Server Chassis SC5400 5U Kit TPS Chassis Power Subsystem The Intel® Server Chassis SC5400 power supplies are Server System Infrastructure (SSI) compliant. The SSI specifications may be found at the following website: www.ssifourm.org. Both the 670W power supply and the 830W power distribution board have identical power supply wire harness cable lengths to reach peripheral bays and server board. 5.1 670W Power Supply The 670W power supply has eight outputs: 3.
Intel® Server Chassis SC5400 5U Kit TPS 5.1.2 Chassis Power Subsystem 670W Output Wire Harness Listed or recognized component appliance wiring material (AVLV2), CN, rated minimum 105 C, 300VDC shall be used for all output wiring. Table 9.
Chassis Power Subsystem 5.1.2.1 Intel® Server Chassis SC5400 5U Kit TPS Server Board Power Connector (P1) Connector housing: 24-Pin Molex* Mini-Fit Jr. 39-01-2245 or equivalent Contact: Molex Mini-Fit, HCS, Female, Crimp 44476 or equivalent Table 10. Baseboard Power Connector Pin 11 2 1 3 1 4 Signal +3.3VDC 18 AWG Color Orange Pin 13 Signal +3.3VDC 18 AWG Color Orange 3.3V RS Orange (24AWG) 14 -12VDC Blue +3.
Intel® Server Chassis SC5400 5U Kit TPS 5.1.2.3 Chassis Power Subsystem Power Signal Connector (P14) Connector housing: 5-pin Molex 50-57-9405 or equivalent Contacts: Molex 16-02-0087 or equivalent Table 12. Power Signal Connector Pin 5.1.2.4 Signal 24 AWG Color 1 I2C Clock White 2 I2C data Yellow 3 Reserved N.C. 4 COM Black 5 3.
Chassis Power Subsystem 5.1.2.6 Intel® Server Chassis SC5400 5U Kit TPS Peripheral Power Consumption (P3, P4, and P6, P8 – P11) Connector housing: Amp 1-480424-0 or equivalent Contacts: Amp 61314-1 contact or equivalent Table 15. Peripheral Power Connectors 5.1.2.7 Pin 1 Signal +12V4 18 AWG Color Green 2 COM Black 3 COM Black 4 +5 VDC Red Right-angle Peripheral Power Connectors (P7) Connector housing: JWT F6001HS2-4P or equivalent Table 16.
Intel® Server Chassis SC5400 5U Kit TPS 5.1.2.9 Chassis Power Subsystem Right-angle SATA Power Connector (P12) Connector housing: JWT F6002HS0-5P-18 or equivalent Table 18. Right-angle SATA Power Connector Pin 5.1.2.10 1 Signal +3.3V 18 AWG Color Orange 2 COM Black 3 +5VDC Red 4 COM Black 5 +12V4 Green SATA Power Connector (P13) Connector housing: JWT A3811H00-5P or equivalent Contact: JWT A3811TOP-0D or equivalent Table 19. SATA Power Connector Pin 5.1.3 1 Signal +3.
Chassis Power Subsystem 5.1.4 Intel® Server Chassis SC5400 5U Kit TPS 670W AC Specifications The power supply incorporates universal power input with active power factor correction, which reduces line harmonics in accordance with the EN61000-3-2 and JEIDA MITI standards. 5.1.4.1 AC Inlet Connector The AC input connector is an IEC* 320 C14 power inlet. This inlet is rated for 15A / 250VAC. 5.1.4.
Intel® Server Chassis SC5400 5U Kit TPS 5.1.4.5 Chassis Power Subsystem AC Line Fuse The power supply has one line fused in the single line fuse on the line (Hot) wire of the AC input. The input fuse is a slow blow type. AC inrush current does not cause the AC line fuse to blow under any conditions. Not all protection circuits shall cause the AC fuse to blow unless a component in the power supply has failed. This includes DC output load short conditions. 5.1.5 670W DC Output Specifications 5.1.5.
Chassis Power Subsystem 5.1.5.3 Intel® Server Chassis SC5400 5U Kit TPS Voltage Regulation The output voltages must stay within the following voltage limits when operating at steady state and dynamic loading conditions. These limits include the peak-peak ripple/noise. All outputs are measured with reference to the return remote sense signal (Returns). The +12V3, +12V4, –12V and 5VSB outputs are measured at the power supply connectors referenced to Returns. The +3.
Intel® Server Chassis SC5400 5U Kit TPS 5.1.6.2 Chassis Power Subsystem Over Temperature Protection In an Over Temperature condition, the power supply will shutdown. When the power supply temperature drops to within specified limits, the power supply shall restore power automatically, while the 5VSB remains always on. The over temperature protection circuit has built-in hysterisis such that the power supply will not oscillate on and off due to a temperature recovering condition.
Chassis Power Subsystem 5.2.1 Intel® Server Chassis SC5400 5U Kit TPS 830W Mechanical Outline Figure 17. 830W Power Supply Mechanical Drawings 34 Revision: 1.
Intel® Server Chassis SC5400 5U Kit TPS 5.2.2 Chassis Power Subsystem 830W Output Wire Harness The output wiring harness is part of the power distribution board (backplane) and is described in that section. The 830W power distribution board wiring harness is identical to the 670W power supply described in Section 5.1.2 above. 5.2.3 830W Airflow Requirements and Temperature Rise The power module supply incorporates one 60mm fan.
Chassis Power Subsystem Intel® Server Chassis SC5400 5U Kit TPS 5.2.5 830W DC Specifications 5.2.5.1 Output Connector The power supply provides card edge fingers, which mate to a female connector located on the backplane (power distribution board). This blind mating type connector connects the power supply’s output voltages and signals. Table 24.
Intel® Server Chassis SC5400 5U Kit TPS Pin Chassis Power Subsystem Component Side Pin Bottom 5 PSON 5 Returns 4 PWOK 4 I2C SCL 3 SMBAlert 3 I2C SDA 2 +12LS 2 A0 1 Vbias 1 +12VRS The ground of the pins of the output connector provides the power return path. The ground pin is connected to safety ground (power supply enclosure). 5.2.5.2 Output Power / Currents The following table defines the current ratings for the 830W power supply. Table 25.
Chassis Power Subsystem 5.2.5.5 Intel® Server Chassis SC5400 5U Kit TPS Voltage Regulation The output voltages must stay within the following voltage limits when operating at steady state and dynamic loading conditions. All outputs are measured with reference to the return remote sense signal (Returns). The 12V and 5VSB outputs are measured at the power distribution output connectors referenced to return source. Table 26. Voltage Regulation Limits Parameter 5.2.
Intel® Server Chassis SC5400 5U Kit TPS 5.2.7.2 Chassis Power Subsystem PWOK Output Signal PWOK is a power OK signal and is pulled HIGH by the power supply to indicate all the outputs are within the regulation limits of the power supply. When any output voltage falls below regulation limits or when AC power has been removed for a time sufficiently long so that power supply operation is no longer guaranteed, PWOK is de-asserted to a LOW state. 5.2.7.
Chassis Power Subsystem 5.3.1 Intel® Server Chassis SC5400 5U Kit TPS Power Distribution Mechanical Overview Note: All dimensions are in millimeters. Figure 18. Power Supply Module 40 Revision: 1.
Intel® Server Chassis SC5400 5U Kit TPS Chassis Power Subsystem Figure 19. Mechanical Dimensions Power Distribution Board Note: All dimensions in the drawing are in mm. Revision: 1.
Chassis Power Subsystem 5.3.2 Intel® Server Chassis SC5400 5U Kit TPS Temperature Operational Limits The power supply modules provide airflow to cool the power distribution board. The power distribution board operates over the specified limits listed in the following table: Table 27. Thermal Requirements Item Description Minimum Maximum Units Top Operating temperature range. 10 45 C Tnon-op Non-operating temperature range. -40 70 C 5.3.3 Electrical Specification 5.3.3.
Intel® Server Chassis SC5400 5U Kit TPS From Power supply cover exit hole Chassis Power Subsystem Length For Revision S0 Only (mm) 565 75 Extension Connector # Number of Pins Description P10 4 Peripheral Power Connector P11 4 Peripheral Power Connector Power supply cover exit hole 565 P12 5 Right-angle SATA Power Connector Extension 75 P13 5 SATA Power Connector Power supply cover exit hole 755 P14 2x2 12V4 Power Connector Power supply cover exit hole 450 P15 1x5 Signal Conn
Chassis Power Subsystem 5.3.3.3 Intel® Server Chassis SC5400 5U Kit TPS Processor Power Connector (P2) Connector housing: 8-Pin Molex 39-01-2080 or equivalent Contact: Molex 44476-1111 or equivalent Table 30. Processor Power Connector Pin 1 Signal COM 18 AWG Color Black Pin 5 Signal +12V1 18 AWG Color White 2 COM Black 6 +12V1 White 3 COM Black 7 +12V2 Brown 4 COM Black 8 +12V2 Brown 5.3.3.
Intel® Server Chassis SC5400 5U Kit TPS 5.3.3.6 Chassis Power Subsystem Power Signal Connector (P15) Connector housing: 5-pin Molex 50-57-9405 or equivalent Contacts: Molex 16-02-0087 or equivalent Table 33. Power Signal Connector 5.3.3.7 Pin 1 I2C Clock Signal 2 I2C data 24 AWG Color Brown Blue # 3 SMBAlert White 4 Return Sense Black 5 3.
Chassis Power Subsystem 5.3.3.9 Intel® Server Chassis SC5400 5U Kit TPS Right-angle SATA Power Connector (P12) Connector housing: JWT F6002HS0-5P-18 or equivalent Contact: JWT A3811TOP-0D or equivalent Table 36. SATA Power Connector Pin 1 5.3.3.10 Signal +3.3V 18 AWG Color Orange 2 COM Black 3 +5VDC Red 4 COM Black 5 +12V4 Green SATA Power Connector (P13) Connector housing: JWT A3811H00-5P or equivalent Contact: JWT A3811TOP-0D or equivalent Table 37.
Intel® Server Chassis SC5400 5U Kit TPS Chassis Power Subsystem 3.3V / 5V combined power limit is 170W maximum. Table 38. DC/DC Converters Load Ratings Maximum Load +12VDC Input DC/DC Converters +3.3V Converter +5V Converter -12V Converter 25.0A 30.0A 0.5A Minimum Static / Dynamic Load 0.0A 0.0A 0.0A Maximum Output Power, see table note below 3.3x25=82.5W 5x30=150W 0.5x12=6W Note: The straight sum of the three maximum powers = 238.5W, but considering the 3.
Chassis Power Subsystem 5.3.4 Intel® Server Chassis SC5400 5U Kit TPS Protection Circuits Protection circuits inside the power distribution board (and the power supply) cause the following: The power supply’s main +12V output to shutdown, which in turn shuts down the other three outputs on the power distribution board or Shut down any of the three outputs on the power distribution board, which in turn also shuts down the entire power supply combo.
Intel® Server Chassis SC5400 5U Kit TPS 5.3.5.2 Chassis Power Subsystem PSKILL The purpose of the PSKill pin is to allow for hot swapping of the power supply. The mating pin of this signal on the power distribution board input connector should be tied to ground, and its resistance shall be less than five ohms. 5.3.5.
Chassis Power Subsystem 5.4.2 Intel® Server Chassis SC5400 5U Kit TPS Events Critical events will cause the power supply to shutdown and latch the LED and SMBAlert signal no matter what mode the power supply is in; “default” or Intelligent.” Warning events latch the LED and SMBAlert signal when in “intelligent” mode. If in the “default” mode, the LED and SMBAlert signal will de-assert as soon as the condition driving the event clears. 5.4.
Intel® Server Chassis SC5400 5U Kit TPS 6. Hot Swap Hard Disk Drive Bays Hot Swap Hard Disk Drive Bays The chassis can support either an Active SAS/SATA or a Passive SAS/SATA backplane. The backplanes provide the platform support for hot-swap SAS or SATA hard drives. The passive backplane acts as a “pass-through” for the SAS/SATA data from the drives to the SAS/SATA controller on the baseboard or a SAS/SATA controller add-in card. It provides the physical requirements for the hot-swap capabilities.
Hot Swap Hard Disk Drive Bays Intel® Server Chassis SC5400 5U Kit TPS The figure below shows the functional blocks of the passive 6HDD SAS/SATA HSBP. Figure 20. 6HDD Passive SAS/SATA HSBP Block Diagram 6.1.1 Server Board and Storage Management Controller VSC410* The Vitesse* VSC410 baseboard and storage management controller for the SAS/SATA backplane monitors various aspects of the storage enclosure.
Intel® Server Chassis SC5400 5U Kit TPS 6.1.1.1 Hot Swap Hard Disk Drive Bays I2C Serial Bus Interface The VSC410* controller supports four independent I2C interfaces with bus speed of up to 400 Kbits. The I2C bus 0 supports an AT24C64* EEPROM or equivalent I2C -based EEPROM used as FRU. The I2C bus 1 supports a TI TMP75* or equivalent I2C -based temperature sensor. This enables actual temperature value readings to be returned to the host.
Hot Swap Hard Disk Drive Bays Intel® Server Chassis SC5400 5U Kit TPS Table 41. 6HDD I2C Bus Loading Device ViH ViL TMP75* Power Well P3V3 0.7VCC 0.3VCC VSC410* P3V3 2.0V AT24C64* P3V3 VSC410* VSC410* VoL Ileak CAP 0.4V/3mA 1uA 3PF 0.8V 0.4V/4mA 10uA 0.7VCC 0.3VCC 0.4V/2.1mA 3uA P3V3 2.0V 0.8V 0.4V/4mA 10uA P3V3 2.0V 0.8V 0.
Intel® Server Chassis SC5400 5U Kit TPS 6.1.2 Hot Swap Hard Disk Drive Bays General Purpose Input/Output (GPIO) The VSC410* controller supports GPIO pins that are customizable. The following table lists the GPIO pins with their assigned functions. Table 42. 6HDD VSC410* Controller GPIO Assignment VSC410* Pin I/O Power Name Type Well P0_0 O 3.3V Programming Description U3B1 FLASH ROM and U3C1 EEPROM write protect control System Function Reset State Initial Value Connection FM_EEPROM_WP Pull up 4.
Hot Swap Hard Disk Drive Bays VSC410* Pin I/O Power Name Type Well Intel® Server Chassis SC5400 5U Kit TPS Programming Description System Function Reset State Initial Value Connection _N P2_6 O 3.3V Test Point TP_LED_DRV10_FLT_ N P2_7 O 3.3V Test Point TP_FM_DRV10_PRSN T_N P3_0 I/O 3.3V Clock signal of SGPIO interface SGPIO_CLK P3_1 I/O 3.3V. Load signal of SGPIO interface SGPIO_LOAD P3_2 I/O 3.3V SDATAIN signal of SGPIO SGPIO_DATAOUT0 interface P3_3 I/O 3.
Intel® Server Chassis SC5400 5U Kit TPS 6.1.5 Hot Swap Hard Disk Drive Bays SAS/SATA Drive Connectors The 4HDD and 6HDD SAS/SATA HSBP provides four or six 22-pin SAS/SATA connectors for hot swap hard disk drives supporting a 1.5GHz and 3.0GHz transfer rate. Table 44. 22-pin SAS/SATA Connector Pin-out 6.1.
Hot Swap Hard Disk Drive Bays 6.1.7 Intel® Server Chassis SC5400 5U Kit TPS Clock Generation and Distribution The 4HDD and 6HDD SAS/SATA HSBP provides one clock source. A 4-MHz crystal provides clock to the VSC410* controller. 6.1.8 7-Pin SAS/SATA Host Connectors The 4HDD and 6HDD passive SAS/SATA HSBP provides four or six 7-pin SAS/SATA connectors that will be connected to the host interface of the server board or HBA via mated cable.
Intel® Server Chassis SC5400 5U Kit TPS 6.1.10 Hot Swap Hard Disk Drive Bays SGPIO Header - SGPIO The following table defines the pin-out of the 4-pin SGPIO Header. This connector is black in color. Table 48. SGPIO Header Pin-out Pin 6.1.11 1 Signal Name SGPIO_CLK Clock Description 2 SGPIO_LOAD Load 3 SGPIO_DATAOUT0 DATAIN 4 SGPIO_DATAOUT1 DATAOUT SES Header - SES The following table defines the pin-out of the 3-pin SES Header. This connector is white in color. Table 49.
Hot Swap Hard Disk Drive Bays 6.1.12.3 Intel® Server Chassis SC5400 5U Kit TPS SES Cable Only used with SAS controllers – white 3-pin connector on HSBP to white 3-pin SES connector on motherboard Connect to white SES connector on motherboard, OR Connect to SES connector on add in peripheral card 6.1.13 Board Layouts The figure below shows the board layout and connector placement of the 6HDD passive SAS/SATA hot swap backplane.
Intel® Server Chassis SC5400 5U Kit TPS Hot Swap Hard Disk Drive Bays The figure below shows the board layout and connector placement of the 4HDD passive SAS/SATA hot swap backplane. A: SATA/SAS hot-swap drive connectors B: SATA/SAS cable connectors C: SES header D: SGPIO header E: IPMB header F: Power Connectors Figure 23. Intel® Server Chassis SC5400 4HDD Passive SAS/SATA HSBP Board Layout Note: Secondary side is mirrored. Revision: 1.
Hot Swap Hard Disk Drive Bays 6.1.14 Intel® Server Chassis SC5400 5U Kit TPS Connector Specifications Table 50. 6HDD Passive SAS/SATA Hot Swap Backplane Connector Specifications Quantity 2 Manufacturer and Part Number Molex 15-24-4744 Description Color Reference CONN,PWR,4P,STD,PLG,VT,0.
Intel® Server Chassis SC5400 5U Kit TPS 6.1.15 Hot Swap Hard Disk Drive Bays SAS/SATA Hot Swap Drive Cage Upgrade Kit The 4HDD and 6HDD SAS/SATA drive cage upgrade kit allows for installation of up to 10 hot swap SAS/SATA drives in the server. The kit includes a SAS/SATA hot-swap drive bay with mounting hardware. With this kit, the SAS/SATA hot swap drive cage can be connected to the SAS/SATA connectors on the server board or to a SAS/SATA RAID card, through the mated cable.
Hot Swap Hard Disk Drive Bays Intel® Server Chassis SC5400 5U Kit TPS The figure below shows the functional blocks of the Active 6HDD SAS/SATA HSBP. Figure 24. 6HDD Active SAS/SATA HSBP Block Diagram 6.2.1 SAS Expander Vitesse VSC7161* The VSC7161* device is a 10-port self-configuring SAS Expander that supports 1.5 Gbps and 3.0 Gbps. This device is used for server and enclosure applications for mid-range and enterprise storage systems requiring active SAS port expansion.
Intel® Server Chassis SC5400 5U Kit TPS Hot Swap Hard Disk Drive Bays Two multimaster two-wire serial interfaces Flexible General Purpose I/O for LEDs, Fan Tach, and other functions. The VSC7161* contains all the functions needed to implement a SAS enterprise server or JBOD system. Typically, this device distributes SAS signals to an array of disk drives in either a server or an external enclosure.
Hot Swap Hard Disk Drive Bays 6.2.1.2 Intel® Server Chassis SC5400 5U Kit TPS SAS Host Interface Port 8 and Port 9 of VSC7161* SAS Expander were only used as SAS host interface, each port connects to SAS controller of server board or HBA via a separate 7-pin SAS connector. The following table defines pin-out of the 7-pin SAS connector: Table 52.
Intel® Server Chassis SC5400 5U Kit TPS Hot Swap Hard Disk Drive Bays I2C Bus Address and Loading 6.2.1.4 Table 53. I2C Bus Addressing AT24C64* I2C Address A0h TMP75* I2C Address 90h VSC410* I2C port2 C0h or C2h Table 54. 6HDD I2C Bus Loading Device ViL TMP75* 0.7VCC 0.3VCC VSC7161* P3V3 2.0V AT24C64* P3V3 VSC7161* P3V3 MMBF170(S)* P3V3 SAS_I2C1_DAT, SAS_I2C1_CLK MMBF170(D)* P5V SMB_IPMB_5V_CLK, SMB_IPMB_5V_DAT J4D2 P5V 6.2.1.5 Ileak CAP 0.4V/3mA 1uA 3PF 0.8V 0.
Hot Swap Hard Disk Drive Bays 6.2.2 Intel® Server Chassis SC5400 5U Kit TPS General Purpose Input/Output (GPIO) The VSC7161* SAS Expander supports GPIO pins that are customizable. The following table lists the GPIO pins with their assigned functions. Table 55. VSC7161* SAS Expander GPIO Assignment VSC7161* PIN Name P0_0 I/O Power Type Well O 3.3V Programming Description HDD0 Fault LED control System Function LED_DRV0_FLT_N Pull up 4.7K to 3.3V P0_1 O 3.
Intel® Server Chassis SC5400 5U Kit TPS 6.2.3 Hot Swap Hard Disk Drive Bays External Memory Device The 4HDD and 6HDD active SAS/SATA HSBP contains a non-volatile 8Mbit Serial SPI FLASH Memory for Boot and Run-Time/Configuration code storage. The device resides on the SPI interface of VSC7161* SAS Expander. The Serial SPI Flash memory operates from the 3.3V rail. 6.2.4 LEDs The 4 and 6 HDD Active SAS/SATA HSBP contains a green STATUS LED and amber FAULT LED for each of the six hard disk drives.
Hot Swap Hard Disk Drive Bays Intel® Server Chassis SC5400 5U Kit TPS Connector Contact Number 6.2.6 Signal Name P1 TP_DRVn_P1 P2 TP_DRVn_P2 P3 TP_DRVn_P3 P4 GND P5 GND P6 GND P7 P5V_DRVn_PRECHG P8 P5V P9 P5V P10 GND P11 LED_DRVn_READY_N P12 GND P13 P12V_DRV2_PRECHG P14 P12V P15 P12V Power Connectors The 4HDD and 6HDD active SAS/SATA HSBP provides two standard 4-pin hard disk drive power connectors. The following table defines the pin-out of the 4-pin Power Connectors.
Intel® Server Chassis SC5400 5U Kit TPS 6.2.8 Hot Swap Hard Disk Drive Bays IPMB Header - IPMB The following table defines the pin-out of the 4-pin IPMB Header. Table 59. IPMB Header Pin-out Pin Signal Name Description 1 SMB_IPMB_5V_DAT Data 2 GND GND 3 SMB_IPMB_5V_CLK Clock 4 SMB_IPMB_5V_ADDR IPMI interface address selection. Primary(Low) = 0xC0, Secondary(High) = 0xC2 6.2.9 Active Hot Swap Backplane (HSBP) Cables Explained Expander backplanes ship with only one cable (IPMB).
Hot Swap Hard Disk Drive Bays 6.2.10 Intel® Server Chassis SC5400 5U Kit TPS Board Layouts The following figures show the board layout and connector placement of the 6HDD active SAS/SATA hot swap backplane. A: SATA/SAS hot-swap drive connectors B: SATA/SAS cable connectors C: IPMB header D: Power Connectors Figure 27. Intel® Server Chassis SC5400 6HDD Active SAS/SATA HSBP Board Layout 72 Revision: 1.
Intel® Server Chassis SC5400 5U Kit TPS Hot Swap Hard Disk Drive Bays The figures below show the board layout and connector placement of the 4HDD active SAS/SATA hot swap backplane. A: SATA/SAS hot-swap drive connectors B: SATA/SAS cable connectors C: IPMB header D: Power Connectors Figure 28. Intel® Server Chassis SC5400 4HDD Active SAS/SATA HSBP Board Layout Note: Secondary side is mirrored. Revision: 1.
Hot Swap Hard Disk Drive Bays 6.2.11 Intel® Server Chassis SC5400 5U Kit TPS Connector Specifications Table 60. 6HDD Active SAS/SATA Hot Swap Backplane Connector Specifications Quantity 2 Manufacturer and Part Number Molex 15-24-4744 6 Description Color Reference CONN,PWR,4P,STD,PLG,VT,0.
Intel® Server Chassis SC5400 5U Kit TPS 7. Chassis Interconnect Chassis Interconnect The following figures illustrate the connections between components of the Intel® Server Chassis SC5400 and a server baseboard. Components include the front panel, hard drive bays, 5.25” drives, chassis fans, and power supply. Figure 29. Chassis Interconnect Diagram (HSRP w/Expander Backplanes) Revision: 1.
Chassis Interconnect Intel® Server Chassis SC5400 5U Kit TPS Figure 30. Chassis Interconnect Diagram (BASE w/Non-Expander Backplane) 76 Revision: 1.
Intel® Server Chassis SC5400 5U Kit TPS 7.1 Chassis Interconnect Chassis Internal Cables The following cables are provided as part of the chassis kit and accessories. Table 62.
Chassis Interconnect 7.1.2 Intel® Server Chassis SC5400 5U Kit TPS USB Cable and Connectors A 10-conductor USB cable with 10-pin connectors is used for connecting the front panelmounted USB connector to the server board. Figure 32. USB Cable Drawing Figure 33. USB Connector 78 Revision: 1.
Intel® Server Chassis SC5400 5U Kit TPS 7.1.3 Chassis Interconnect Hot Swap Fan Cables and Connectors There are four hot swap fans. The 92-mm fans are labeled fans 1 and 2 and use a white 6-pin connector. The 120-mm fans are labeled fans 3 and 4 and use a 6-pin blue connector. Figure 34. Hot Swap Fan Cable Figure 35. Hot Swap Fan 6-pin Cable Connector Figure 36. Hot Swap 8-pin Fan Cable Connectors Revision: 1.
Chassis Interconnect 7.1.4 Intel® Server Chassis SC5400 5U Kit TPS Serial Cable The 8-conductor cable provided is terminated in a 2x5 header at one end and a 9-pin panel mount D-sub connector on the other. Figure 37. Serial Cable 7.1.5 SATA Data Cable SATA cables are provided to interface from the server board to the hot swap backplane. The SATA cables ship with the upgrade kit. Figure 38. SATA Cable Figure 39. SATA Cable Connector 80 Revision: 1.
Intel® Server Chassis SC5400 5U Kit TPS 7.1.6 Chassis Interconnect IPMB cable for 6-Drive Bays (4-pin) The IPMB cable is used for communication between the backplane firmware and the baseboard. Communication events include fan control, drive insertion, drive removal, and drive failures. This interface is also used to update backplane firmware. Figure 40. IPMB Cable 7.1.
System-Compatible Server Boards 8. Intel® Server Chassis SC5400 5U Kit TPS System-Compatible Server Boards The Intel® Server Chassis SC5400 supports the following Intel® server boards: 82 Intel® Server Board S5000PSL Intel® Server Board S5000XVN Intel® Server Board S5000XSL Revision: 1.
Intel® Server Chassis SC5400 5U Kit TPS 9. Upgrade Accessories Upgrade Accessories Principle upgrades include the tool-less four-drive fixed drive bay, four and six-drive SAS/SATA hot swap drive bays, rack mount conversion kit, and slimline CD/USB Floppy Drive Kit. 9.1 SAS/SATA Hot Swap Drive Bays - AXX6DRV3G and AXX4DRV3G The optional hot-swap SAS/SATA hard disk drive bays, AXX6DRV3G and AXX4DRV3G, are available for all the Intel® Server Chassis SC5400 configurations.
Reliability, Serviceability, and Availability Intel® Server Chassis SC5400 5U Kit TPS 10. Reliability, Serviceability, and Availability 10.1 Mean Time Between Failure The following is the calculated Mean Time Between Failures (MTBF) at maximum configuration at 35 C. These values are derived using a historical failure rate and multiplied by factors for application, electrical and/or thermal stress and for device maturity. MTBF estimates should be viewed as “reference numbers” only.
Intel® Server Chassis SC5400 5U Kit TPS Reliability, Serviceability, and Availability 10.2 Serviceability The system is designed for service by qualified technical personnel only. The desired Mean Time To Repair (MTTR) of the system is 30 minutes including diagnosis of the system problem. To meet this goal, the system enclosure and hardware have been designed to minimize the mean time to repair.
Environmental Limits Intel® Server Chassis SC5400 5U Kit TPS 11. Environmental Limits 11.1 System Office Environment Table 64. System Office Environment Summary Parameter Operating temperature Limits o o +5 C to +35 C with the maximum rate of change not to exceed 10oC per hour. Non-operating temperature -40oC to +70oC Non-operating humidity 90%, non-condensing @ 30oC Acoustic noise 6.
Intel® Server Chassis SC5400 5U Kit TPS Product Regulatory Compliance 12. Product Regulatory Compliance The Intel® Server Chassis SC5400 is designed and tested to meet the standards and regulation listed below when configured with the Intel® server boards specified. 12.
Product Regulatory Compliance Intel® Server Chassis SC5400 5U Kit TPS Threshold limits and banned substances are noted as follows: Quantity limit of 0.1% by mass (1000 PPM) for: Lead; Mercury; Hexavalent Chromium; Polybrominated Biphenyls Diphenyl Ethers (PBDE); and Quantity limit of 0.
Intel® Server Chassis SC5400 5U Kit TPS Product Regulatory Compliance 12.5 Electromagnetic Compatibility Notices 12.5.1 USA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. For questions related to the EMC performance of this product, contact: Intel Corporation 5200 N.E.
Product Regulatory Compliance 12.5.2 Intel® Server Chassis SC5400 5U Kit TPS FCC Verification Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference This device must accept any interference received, including interference that may cause undesired operation. For questions related to the EMC performance of this product, contact: Intel Corporation 5200 N.E.
Intel® Server Chassis SC5400 5U Kit TPS Product Regulatory Compliance English translation of the preceding notice: This is a Class A product based on the standard of the Voluntary Control Council for Interference (VCCI) from Information Technology Equipment. If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.” 12.5.
Product Regulatory Compliance Intel® Server Chassis SC5400 5U Kit TPS This Page Intentionally Left Blank 92 Revision: 1.
Intel® Server Chassis SC5400 5U Kit TPS Glossary Glossary Word / Acronym ACA Australian Communication Authority Definition ANSI American National Standards Institute ATX Advanced Technology Extended Auto-Ranging Power supply that automatically senses and adjust itself to the proper input voltage range (110 VAC or 220 VAC). No manual switches or manual adjustments are needed.
Glossary Intel® Server Chassis SC5400 5U Kit TPS Word / Acronym SATA Serial ATA Definition SCA Single Connector Attachment SDR Sensor Data Record SE Single-Ended SSI Server Standards Infrastructure Surge The condition where the AC line voltage rises above nominal voltage.