User Manual

To build your system and get more details on server configurations from Intel visit: www.intel.com/go/serverconfigurator
For more details on the Intel® Server Systems SR1500AL, SR1550AL and SR2500AL visit: www.intel.com/design/servers/platforms/sr1500-2500/index.htm
For more information on how to make the Intel® Server Systems SR1500AL, SR1550AL and SR2500AL part of your server environment, please contact
an Intel® Channel Partner Program participant.
1
Refer to http://support.intel.com/support/motherboards/server/s5000pal for up-to-date details on processors supported by each server board.
2
RAID 5 available post launch by adding the AXXRAKSW5 activation key.
3
1333 MHz support may require updates that may not be available at launch.
4
The Intel® Adaptive slot has the following options: 1U Options: 1 x PCI X 133 MHz or 1 x PCI Express*; 2U Options: 3 x PCI X 133MHz (via Active Riser) or 3 x PCI X up-to 100 MHz or 2 x PCI Express and 1 x PCI X 133 MHz
5
64-bit computing on Intel architecture requires a computer system with a processor, chipset, BIOS, operating system, device drivers and applications enabled for Intel® 64 architecture. Processors will not operate
(including 32-bit operation) without an Intel® 64 architecture-enabled BIOS. Performance will vary depending on your hardware and software configurations. Consult with your system vendor for more information.
6
Intel® Virtualization Technology requires a computer system with an enabled Intel® processor, BIOS, virtual machine monitor (VMM) and for some uses, certain platform software enabled
for it. Functionality, performance or other benefits will vary depending on hardware and software configurations. Intel Virtualization Technology-enabled BIOS and VMM applications are
currently in development.
7
Enabling Execute Disable Bit functionality requires a PC with a processor with Execute Disable Bit capability and a supporting operating system. Check with your PC manufacturer on
whether your system delivers Execute Disable Bit functionality.
8
Can be upgraded via a Remote Management Module, order code AXXRMM.
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS,
INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY RELATING TO SALE AND/OR USE OF INTEL PRODUCTS, INCLUDING LIABILITY
OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY RIGHT.
Intel, the Intel logo, Intel. Leap ahead., the Intel. Leap ahead. logo, Xeon, and Intel SpeedStep are trademarks of Intel Corporation in the U.S. and other countries.
*Other names and brands may be claimed as the property of others.
Copyright © 2007 Intel Corporation. All rights reserved. 0807/EOH/MS/XX/PDF
nPlease Recycle 311913-002US
Technical Specifications
System Memory
Capacity
Eight Fully Buffered DIMM sockets for up to 32 GB of registered
ECC DDR2 533 or 667 memory
Reliability Features
Corrects single-bit errors, detects double-bit errors (using ECC
memory), and supports Intel® x4 Single Device Data Correction
(Intel® x4 SDDC), memory mirroring, memory sparing
Intel® Server Management
Integrated Management Type
IPMI 2.0-compliant onboard platform instrumentation
8
Software Support
Intel® System Management Software
Supported Operating Systems
Microsoft* Windows* Server 2003 Enterprise Edition, Microsoft
Windows 2000 Advanced Server, Red Hat* Linux* Enterprise 4.0,
SuSE Linux* Enterprise Server, and Novell* NetWare* 6.5
System BIOS
Type
8Mb Flash EEPROM with EFI* BIOS, Multiboot BBS (BIOS Boot
Specification) 1.4-compliant
Special Features
Plug and play, IDE drive autoconfigure, SMBIOS 2.3, ECC/parity support,
multilingual support, enabled for rolling/online BIOS updates
Jumpers
CMOS clear, password clear, BIOS bank select, BMC boot block write
protect, serial port B select
Front-Panel Features
SR1500 and SR2500 systems: Power LED, hard-drive activity LED,
system status LED, power/sleep switch, 2 server network connection
LEDs, reset switch, NMI switch, System ID LED, Video connection, and
a bootable USB 2.0 connection
SR1550 system: Power LED, system status LED, power/sleep
switch, NMI switch, System ID LED, and a bootable USB 2.0 connection
Mechanical
Board Style
SSI TEB 2.1
Board Size
12” x 13” (305 mm x 330 mm)
Environment
Ambient Temperature
Operating (system): +10°C to +35°C;
non-operating/storage (system): -40°C to +70°C ambient
Relative Humidity
Non-operating: 95%, non-condensing at +30°C
Safety and EMC Regulatory Compliance (Class A)
(EMC Regulatory Compliance is based on a board configured in an Intel
host system in which Intel tested the board and found it compliant.)
RoHS (Restriction of Hazardous Substances) compliant with server
exemption.
Region Certification Regulatory Mark
Safety and/or EMC Safety and/or EMC
Australia/ ACA, MED C-Tick
New Zealand
Canada UL/Industry Canada cURus/ICES
Europe European Directives CE
Germany GS GS
International CB Report / CISPR No legal requirements
Japan VCCI No legal requirements
(Verification only)
Korea RRL MIC
Taiwan BSMI DOC BSMI
United States UL / FCC cURus
(Verification only)