English version

ManualsBrandsIntel ManualsOtherIntel SSD 530 Series

Intel

Solid-State Drive 910 Series

Limited Warranty with Media Wear Indicator,

Temperature Trip, and Firmware Update Tool Restrictions

If you are a consumer under the Australian Consumer Law, this warranty does not apply to you. Please visit

http://www.intel.com/support/ssdc/hpssd/sb/CS-029645.htm to view the limited warranty which is applicable to Australian

consumers.

Intel warrants to the purchaser of the Product specified above in its original sealed packaging (“Original Purchaser”) and to the

purchaser of a computer system built by an Original Purchaser containing the Product (“Original System Customer”) as follows:

if the Product is properly used and installed, it will be free from defects in material and workmanship, and will substantially

conform to Intel’s publicly available specifications for the “warranty period”, which is a period of five (5) years beginning on the

date the Product was purchased in its original sealed packaging in the case of an original purchaser or the date of original

purchase of a computer system containing the Product in the case of an original system customer; PROVIDED, HOWEVER, THAT

THE WARRANTY PERIOD IS IMMEDIATELY TERMINATED UPON THE OCCURRENCE OF ANY ONE OR MORE OF THE FOLLOWING

EVENTS:

(A) THE USAGE OF THE DRIVE, AS MEASURED BY INTEL’S IMPLEMENTATION OF THE “SMART” ATTRIBUTE “WEAR

INDICATOR”, REACHES OR EXCEEDS A VALUE OF “0x64”, AS REPORTED BY THE INTEL® SSD DATACENTER TOOL; OR

(B) THE TEMPERATURE OF THE DRIVE,

AS MEASURED BY INTEL’S IMPLEMENTATION OF THE “SMART” ATTRIBUTE

“MAXIMUM TEMPERATURE”, REACHES OR EXCEEDS THE A VALUE OF “0x56”, AS REPORTED BY THE INTEL® SSD

DATACENTER TOOL; OR

The “Wear Indicator” and “Maximum Temperature” are specified in the Intel datasheet for the Product, and can be accessed

using the Intel® Solid-State Drive Datacenter Tool software available as a free download from Intel. By using the Intel SSD

Datacenter Tool, the user can find the SMART attribute “Wear Indicator” in Byte number 46 and the “Maximum Temperature” in

Byte number 12 of the log page titled “0x2F”. For Windows, this information can be retrieved by entering the following in the

Command Prompt: “issdct.exe –log 0x2F –drive <drivenum> -device <devicenum> -verbose”. For Linux, enter the command:

“./issdct –log 0x2F –drive <drivenum> -device <devicenum> -verbose”. A new, unused drive will show a Wear Indicator value of

“0x00”, while a drive that has reached its write endurance limit will show a Wear Indicator value of “0x64” or greater. A drive

that has exceeded its temperature limit will show “Maximum Temperature” attribute value greater of “0x56” or greater.

If the Product, which is the subject of this Limited Warranty, fails to conform to the above warranty during the warranty period,

Intel, at its option, will:

 REPAIR the Product by means of hardware and/or software; OR

 REPLACE the Product with another product; OR, if Intel is unable to repair or replace the Product,

 REFUND the then-current value of the Product at the time a claim for warranty service is made to Intel under this

Limited Warranty.

THIS LIMITED WARRANTY, AND ANY IMPLIED WARRANTIES THAT MAY EXIST UNDER APPLICABLE STATE, NATIONAL,

PROVINCIAL OR LOCAL LAW, APPLY ONLY TO YOU AS THE ORIGINAL PURCHASER OF THE PRODUCT OR COMPUTER SYSTEM

THAT INCLUDES THE PRODUCT AND LASTS ONLY FOR AS LONG AS YOU CONTINUE TO OWN THE PRODUCT. WARRANTY

COVERAGE TERMINATES IF THE ORIGINAL SYSTEM CUSTOMER SELLS OR OTHERWISE TRANSFERS THE COMPUTER SYSTEM

WHICH INCLUDES THE PRODUCT.

EXTENT OF LIMITED WARRANTY

Intel does not warrant that the Product will be free from design defects or errors known as “errata.” Current characterized

errata are available upon request. Further, this Limited Warranty does NOT cover:

 Any costs associated with the repair or replacement of the Product including labor, installation or other costs incurred

by you, and in particular, any costs relating to the removal or replacement of any Product that is soldered or

otherwise permanently affixed to any printed circuit board; OR

Summary of content (3 pages)

PAGE 1
Intel® Solid-State Drive 910 Series Limited Warranty with Media Wear Indicator, Temperature Trip, and Firmware Update Tool Restrictions If you are a consumer under the Australian Consumer Law, this warranty does not apply to you. Please visit http://www.intel.com/support/ssdc/hpssd/sb/CS-029645.htm to view the limited warranty which is applicable to Australian consumers.
PAGE 2
 Damage to the Product due to external causes, including accident, problems with electrical power, abnormal electrical, mechanical or environmental conditions, usage not in accordance with product instructions, misuse, neglect, alteration, repair, improper installation, or improper testing; OR  Any Product which has been modified or operated outside of Intel’s publicly available specifications or where the original identification markings (trademark or serial number) has been removed, altered or oblite
PAGE 3
LIMITATIONS OF LIABILITY INTEL’S RESPONSIBILITY UNDER THIS OR ANY OTHER WARRANTY, IMPLIED OR EXPRESS, IS LIMITED TO REPAIR, REPLACEMENT OR REFUND, AS SET FORTH ABOVE. THESE REMEDIES ARE THE SOLE AND EXCLUSIVE REMEDIES FOR ANY BREACH OF WARRANTY.