X25E High Performance SATA SSD Product manual

ManualsBrandsIntel ManualsOtherIntel SSD 530 Series

Order Number: 319984-003US

January 2009

Intel

X25-E SATA Solid State Drive

SSDSA2SH032G1, SSDSA2SH064G1

Product Manual

 Available in 2.5” Form Factor

 Capacity: 32 GB, 64 GB

 Uses Intel NAND flash memory Single Level

Cell (SLC) components

 Bandwidth Performance Specifications

— Sustained Sequential Read: up to 250 MB/s

— Sustained Sequential Write: up to 170 MB/s

 Read and Write IOPS Specifications

(IOmeter Queue Depth 32)

— Random 4 KB Reads: 35 K IOPS

— Random 4 KB Writes: 3.3 K IOPS

 Compatibility

—Intel

Matrix Storage Manager

— SATA Revision 2.6 compliant, compatible

with SATA 1.5 Gb/s and 3 Gb/s interface

rates

— ATA/ATAPI-7 Compliant

— SSD Enhanced SMART ATA feature set

— Native Command Queuing (NCQ) command

 Compliance

—UL*

—CE*

—C-Tick*

—BSMI*

—MIC*

—Microsoft* WHQL

—RoHS*

 Power Management

— 5 V SATA Supply Rail

— Supports ATA Power Management and

Advanced Power Management Specifications

— SATA Interface Power Management

— OS-Aware Hot Plug/Removal

 Power Specifications

— Active: 2.4/2.6 W (32 GB/64 GB) TYP

— Idle: .060 W TYP

 Temperature

—Operating: 0

C to 70

— Non-Operating: -55

C to 95

 Reliability

— Bit Error Rate (BER): 1 sector per 10

bits

read

— Mean Time Between Failures (MTBF)

2,000,000 Hours

— Write Endurance: 1 petabyte of random

writes

 Shock

— Operating and Non-operating: 1,000G/0.5

msec

 Vibration

— Operating: 2.17 G (7-800 Hz)

— Non-operating 3.13 G (10-500 Hz)

 Weight:

— 80 +/- 2 grams (32 GB)

— 90 +/- 2 grams (64 GB)

(2.5” 7 mm Form Factors)

Summary of content (24 pages)

PAGE 1
Intel® X25-E SATA Solid State Drive SSDSA2SH032G1, SSDSA2SH064G1 Product Manual Available in 2.5” Form Factor Capacity: 32 GB, 64 GB Uses Intel NAND flash memory Single Level Cell (SLC) components Bandwidth Performance Specifications — Sustained Sequential Read: up to 250 MB/s — Sustained Sequential Write: up to 170 MB/s Read and Write IOPS Specifications (IOmeter Queue Depth 32) — Random 4 KB Reads: 35 K IOPS — Random 4 KB Writes: 3.
PAGE 2
Legal Lines and Disclaimers Ordering Information Decoder Intel High Performance Solid State Drive Ordering Information Part Number MM # Device Nomenclature Packaging SSDSA2SH032G101 896432 32 GB SATA 2.5” Drive SLC High Performance, Production Sample SSDSA2SH032G1C5 900342 32 GB SATA 2.5” Drive SLC High Performance, Production Sample 5 unit SSDSA2SH032G1 896474 32 GB SATA 2.5” Drive SLC High Performance, Production Sample 50 unit 1 unit SSDSA2SH064G101 899386 64 GB SATA 2.
PAGE 3
Intel® X25-E SATA SSD Contents 1.0 Introduction .............................................................................................................. 5 1.1 Product Overview ................................................................................................ 5 1.2 Block Diagram .................................................................................................... 6 1.3 Architecture............................................................................................
PAGE 4
Intel® X25-E SATA SSD Intel® X25-E SATA Solid State Drive Product Manual 4 January 2009 Order Number: 319984-003US
PAGE 5
Intel® X25-E SATA SSD 1.0 Introduction The Intel® X25-E SATA Solid State Drive (SSD) delivers ultimate performance in an industry standard 2.5” form factor while simultaneously improving system responsiveness over standard rotating media or hard disk drives (HDD) in some of the most demanding applications.
PAGE 6
Intel® X25-E SATA SSD 1.2 Block Diagram Figure 1. Block Diagram Flash Memory Channel 0 SATA Interface Intel System On A Chip (SOC) Flash Memory Channel ... Flash Memory Channel n 1.3 NAND Flash Memory NAND Flash Memory NAND Flash Memory Architecture The Intel® X25-E SATA Solid State Drives utilize a cost effective System on a Chip (SOC) design to manage a full SATA 3 Gb/s bandwidth with the host while managing multiple flash memory devices on multiple channels internally.
PAGE 7
Intel® X25-E SATA SSD 2.0 Certifications and Compliance Table 1. Device Certifications Certification/Compliance Description CE Compliant Indicate conformity with the essential health and safety requirements set out in European Directives Low Voltage Directive and EMC directive. UL Certified Underwriters Laboratories, Inc. Component Recognition UL60950-1.
PAGE 8
Intel® X25-E SATA SSD Table 4. Random Read and Write Input/Output Operations per Second (IOPS) Access Type IOPS 4K Read 35,000 4K Write 3,300 Notes: 1. Performance measured using IOmeter with queue depth set to 32. 2. Write Cache enabled. 3. Random IOPS cover the entire range of legal logical block addresses (LBAs). Measurements are performed on a full drive (all LBAs have valid content). Table 5.
PAGE 9
Intel® X25-E SATA SSD Drive will transition to idle power level once idle for 25 ms whether or not sleep or standby command is received. Standby power levels assume DIPM enabled. Active power is measured on an IOMeter workload of full bandwidth 64 K sequential writes with queue depth 1. 3.4 Environmental Conditions 3.4.1 Temperature Table 8.
PAGE 10
Intel® X25-E SATA SSD 3.4.4 Acoustics The drive has no moving or noise-emitting parts; therefore, it produces negligible sound (0 dB) in all modes of operation. 3.4.5 Electromagnetic Immunity Electromagnetic Immunity tests assume the SSD is properly installed in the representative host system. The drive will operate properly without errors or degradation in performance when subjected to radio frequency (RF) environments defined in the following table: Table 10.
PAGE 11
Intel® X25-E SATA SSD 3.5.1 Non-recoverable read errors The nonrecoverable read error rate will not exceed one sector in the specified number of bits read. In the extremely unlikely event of a nonrecoverable read error, the drive will report it as a read failure to the host; the sector in error is considered corrupt and is not returned to the host. 3.5.2 Mean Time Between Failure The Mean Time Between Failures (MTBF) is calculated based on a Part Stress Analysis.
PAGE 12
Intel® X25-E SATA SSD 4.0 Mechanical Information Figure 2. Dimensions Note: All dimensions are in millimeters.
PAGE 13
Intel® X25-E SATA SSD 5.0 Pin and Signal Descriptions This section identifies the pin locations and signal descriptions of the Intel High Performance SSDs. 5.1 Pin Locations Figure 3. Layout of Signal and Power Segment Pins Signal Segment S1 Power Segment P1 5.2 Signal Description Table Table 12.
PAGE 14
Intel® X25-E SATA SSD Table 13. Serial ATA Power Pin Definitions Pin1 Function Definition Mating Order P1 Not connected.2 3.3 V Power 2nd Mate P2 Not connected2. 3.3 V Power 2nd Mate P3 2 Not connected. 3.
PAGE 15
Intel® X25-E SATA SSD 6.0 Command Sets 6.1 ATA Commands The Intel X25-E SATA SSD supports all the mandatory ATA commands defined in the ATA/ATAPI-7 specification. 6.1.
PAGE 16
Intel® X25-E SATA SSD Table 14.
PAGE 17
Intel® X25-E SATA SSD Table 14. Word Returned Sector Data (Continued) F = Fixed V = Variable X = Both Default Value Description 80 F 00FCh Major Version Number 81 F 001Ah Minor Version Number 82 F 746Bh Command set supported. 83 F 7C01h Command sets supported. 84 F 6123h Command set/feature supported extension. 85 V 7469h Command set/feature enabled. 86 V BC01h Command set/feature enabled. 87 V 6123h Command set/feature default.
PAGE 18
Intel® X25-E SATA SSD Table 14. Word Returned Sector Data (Continued) F = Fixed V = Variable X = Both Default Value Description 176-205 V 0h Current media serial number 206-216 F 0h Reserved 217 F 0001h 218-221 F 0h Non-rotating media device Reserved 222 F 101Fh Reserved 223-233 F 0h Reserved 234 F 0001h Reserved 235 F 02A0h Reserved 255 X Varies Integrity word (Checksum and Signature) Notes: 1. F = Fixed. The content of the word is fixed and does not change.
PAGE 19
Intel® X25-E SATA SSD 6.1.4 SMART Command Set The Intel X25-E SATA SSD supports the SMART command set, please refer to Intel® High Performance SATA Solid State Drive S.M.A.R.T Features User Guide Order Number 320520-002US. 6.1.
PAGE 20
Intel® X25-E SATA SSD 6.1.8 General Purpose Log Command Set The Intel X25-E SATA SSD supports the General Purpose Log command set, which consists of • READ LOG EXT • WRITE LOG EXT 6.2 SATA Commands The SATA 2.6 specification is a super set of the ATA/ATAPI-7 specification with regard to supported commands. The Intel X25-E SATA SSD supports the following features that are unique to the SATA specification. 6.2.
PAGE 21
Intel® X25-E SATA SSD 7.0 References This document references standards defined by a variety of organizations. Use the following list to identify the location of an organization’s standards information. Table 15. Standards References Date or Rev. # Title Location July 2007 RoHS Search for material data declaration sheets at http:// intel.pcnalert.com July 2007 SFF-8144, 1.8” drive form factor http://www.sffcommittee.org June 2007 Intel Matrix Storage Manager http://support.intel.
PAGE 22
Intel® X25-E SATA SSD 8.0 Glossary This document incorporates many industry- and device-specific words. Use the following list to define a variety of terms and acronyms. Table 16. Glossary of Terms and Acronyms Term Definition ATA Advanced Technology Attachment ATAPI Advanced Technology Attachment Packet Interface BER Bit error rate, or percentage of bits that have errors relative to the total number of bits received DIPM Device Initiated Link Power Management.
PAGE 23
Intel® X25-E SATA SSD 9.0 Revision History Date January 2009 Revision 003 Description Added new capacity of 64 GB to the datasheet. Added power numbers and weight for 64 GB on page 1 and page 8. Added weight information for 64 GB on page 1. Updated reliability information on write endurance on page 1 and page 11. Added user addressable sectors on page 7. Modified Random IOPs table on page 8. Modified latency specification notes on page 8.
PAGE 24
Intel® X25-E SATA SSD Intel® X25-E SATA Solid State Drive Product Manual 24 January 2009 Order Number: 319984-003US