user manual

26
When you finish, click “Apply Changes.” You’ll see the following message
displayed on Web browser.
Click “Continue” to save the settings made and go back to the Web management
interface; click “Apply” to save the settings and restart the router so the settings
will take effect after it reboots.
5.2.1.2 Password Settings
This screen allows you to set the password to access the Web server of the
router. Select the “admin” (as administrator) or “user” (as user) account and
configure the password.
When you finish, click “Apply Changes.”
If the passwords you entered in the “New Password” and “Confirmed Password”
fields are not the same, you’ll see the following message:
Re-enter the new password again when you see above message.