user manual

27
If you see the following message:
It means the content in the “Current Password” field is wrong. Click “OK” to go
back to the previous menu and input the current password again.
If the current and new passwords are correctly entered, after you click “Apply”
you’ll be prompted to input your new password:
Use the new password to enter the Web management interface again, and you
should be able to log in with the new password.
5.2.1.3 Remote Management
The Remote Access function can secure remote host access to your router from
LAN and WAN interfaces for some services provided by the router. These
services include Telnet, FTP, TFTP, HTTP, SNMP and PING.
Click the “System” menu on the left of the Web management interface, then click
“Remote Management” and the following screen will be displayed on your Web
browser.