user manual

29
Click “Continue” to save the settings made and go back to the Web management
interface; click “Apply” to save the settings made and restart the router so the
settings will take effect after it reboots.
5.2.1.4 SNMP
Simple Network Management Protocol (SNMP) is a troubleshooting and
management protocol that uses the UDP protocol on Port 161 to communicate
between clients and servers. The router can be managed locally or remotely by
SNMP protocol.
Parameter
Description
SNMP
Select “Disable” or “Enable” to disable or enable the
SNMP feature.
System Description
Enter the system description of the router.
System Contact
Enter the contact person and/or contact information for
the router.
System Name
Assign an administrative name for the router.
System Location
The physical location of the router.
System Object ID
This is the vendor object identifier: the vendor’s
authoritative identification of the network management
subsystem contained in the entity.
Trap IP Address
Destination IP address of the SNMP trap.
Community name
(read-only)
Name of the read-only community. This read-only
community allows read operation to all objects in the
MIB.