user manual

48
Parameter
Description
Disable Wireless LAN
Interface
Check to deactivate the wireless function of the router.
When this is activated, the router will not be an access
point for other wireless clients to connect wirelessly.
Band
Select the radio band from one of the following options:
• 2.4GHz(B): only allows 802.11b wireless network
clients to connect to this router (maximum transfer rate
is 11 Mbps).
• 2.4 GHz (G): only allows 802.11g wireless network
clients to connect to this router (maximum transfer rate
is 54 Mbps).
• 2.4 GHz (B+G): only allows 802.11b and 802.11g
wireless network clients to connect to this router
(maximum transfer rate is 11 Mbps for 802.11b clients;
54 Mbps for 802.11g clients).
• 2.4 GHz (N): only allows 802.11n wireless network
clients to connect to this router (maximum transfer rate
is 150 Mbps).
• 2.4 GHz (G+N): only allows 802.11g and 802.11n
wireless network clients to connect to this router
(maximum transfer rate is 54 Mbps for 802.11g clients;
150 Mbps for 802.11n clients).
• 2.4 GHz (B+G+N): allows 802.11b, 802.11g and
802.11n wireless network clients to connect to this
router (maximum transfer rate is 11 Mbps for 802.11b
clients; 54 Mbps for 802.11g clients; 150 Mbps for
802.11n clients).
Mode
Set the router to act in AP, Client or WDS mode.
SSID
The SSID (up to 32 printable ASCII characters) is the
unique name identified in a WLAN. The ID prevents the
unintentional merging of two co-located WLANs. The
default SSID of the router is “default.”
Channel Width
Sets the channel width of the wireless radio. Do not
modify the default value if you don’t know what it is. The
default setting is “Auto 20/40 MHz.”