Operation Manual

Page 3 of 4 GB
Installation Instructions
System Requirements:
This hard drive is compatible with the operating systems MS Windows
XP / Vista / Windows 7 and Mac OS 10.x.
Please note:
For the USB 3.0 operation an USB 3.0 interface card is needed. The hard
disk is downwardly compatible with the previous USB standards.
Your PC’s hardware configuration as well as the operating system
employed can influence the compatibility of the hard drive.
Power supply under USB 2.0: If your USB 3.0 hard disc is not recognized
on your PC with a USB 2.0 connection, this could probably be caused by
the power supply. In this case, please connect an USB hub with an
external power supply.
Hard Drive Connection:
To connect an external hard drive to your computer, please use the USB
cable provided. Connect the USB 3.0 plug with the Intenso hard drive and
the plug of the USB cable ending with your computer.
The computer automatically detects the “New Device” and installs the
driver. Please wait until driver installation is completed. Your computer
now shows an additional drive named “Intenso”.