Quick Start Guide

EN - 3
4.) Device overview
5.) Charging the battery
Fully charge the battery of the device before using it for the first time. To this end connect the
supplied power cable with the device and a socket. The complete charging process takes about 5
hours. The charging status is displayed at the front left side of the device. The LED lights up Red
during the charging process, and changes to Yellow as soon as the battery is fully charged.
6.) Using a Micro SD/SDHC Card
This device is able to read data directly from a Micro SD/SDHC memory card.
In order to use a Micro SD/SDHC memory card, slide the card into the opening provided at the
bottom of the device (M). Use the pre-installed Explorer (more information is to be found in the
extensive operating instructions), to be able to access the data provided on the memory card. For
this, please select the “SD Card“ in the index of the Explorer.
a) HDMI
b) Micro USB Socket
c) DC 5V 2A input
d) 3.5mm headphone jack
e) On / Off button: Press and hold to
turn the unit off, press briefly to switch
between standby and active mode.
f) Charge indicator: red during the
charging process – yellow if
completely loaded.
g) Front Camera
h) Built-in microphone
i) Display
j) Volume +
k) Volume -
l) Back camera
m) Micro SD Card slot
n) Integrated speaker