Manual
11
LM-8000(REMOTE CONTROL WITH AUDIO IN)
- You can select BGM or adjust BGM output volume of
using a LM-8000 if a DOT(.) is displayed on the LM-
8000 BGM Display Window.
- You may endow with or release the control right of
LM-8000 using the WALL CTRL button on the front
side on the PX-8000. If the right is endowed to LM-
8000, the button of PX-8000 lights and DOT(.) is
displayed on the LM-8000 BGM Display Window.
- Check connection status and the unit if “E” continues
to flash on the display window.
※
Turn the encoder volume clockwise until checking
is done that volume is changed since volume is set
to minimum for the initial use.
■■
■
CHANGE OF MAIN BGM AND ADJUSTMENT OF
VOLUME IN OUTPUT AREA USING LM-8000
- Endow with the control right of LM-8000 by pressing
the WALL CTRL button of PX-8000.
- Check that the BGM number is changed, by
operating the BGM Selection Button of LM-8000.
- Same BGM number is displayed on the front BGM
Display Window of PX-8000 and LM-8000.
- Adjust local output volume using a volume adjustment
encoder.
※
The volume adjustment encoder of LM-8000 and
the slide volume (FADER) on the front side of PX-
8000 unit control the BGM broadcasting volume of
the output area. A paging MIC broadcasting and
the local output volume of RM-8000 are not
controlled with the encoder and the slide volume.