The Honey Badger 320 Flash and Softbox Kit Instruction Manual www.interfitphotographic.
Honey Badger 320 Digital Flash Unit and Pop-Up Softbox What’s cool about the Honey Badger? The Honey Badger is the perfect tool for any shoot, and at 320Ws and only 3lbs, it’s a real force to be reckoned with. The aggressive flash recycle time ensures you are ready to strike at the right moment, while the expanded 7-stop power range gives you the versatility and precision you need to attack any shoot.
Table of Contents Anatomy of the Honey Badger......................................................... 3 Accessorizing your Honey Badger................................................... 4 Shipping Cover.......................................................................... 4 Bowens® Mount Modifiers....................................................... 4 Softboxes.................................................................................... 4 Umbrellas.............................................
Anatomy of the Honey Badger 1 2 9 15 16 10 3 4 11 17 12 18 19 13 20 5 14 21 7 22 6 8 1. Modifier Quick Release 2. Pop-Up Softbox Ring 3. Bowens® S-Type Mount 4. Frosted Glass Dome 5. Flash Tube and LED Modeling Lamp 6. Light Stand Mount Lock 7. Ratcheting Tilt Lock 8. Light Stand Mount 9. LCD Display Screen 10. Channel Selection 11. Modeling Light Button 12. Sync port 13. Flash Power Up and Down Selection 14. AC Power Port 15. Flash Toggle Button 16. Optical Slave Cell 17.
Accessorizing your Honey Badger Shipping Cover Every Honey Badger flash head includes a protective shipping cover. The shipping cover offers protection to the glass dome, flash tube, and LED modeling lamp during transportation and storage. To remove the shipping cover, pull back on the modifier quick release on the top of the flash unit to release the mount lock. While holding back the release button, twist the shipping cover counterclockwise.
Accessorizing your Honey Badger Umbrellas Umbrellas are the most widely-used modifiers in photography. Their ease-of-use and versatility makes them quick to master; a go-to modifier in many situations. Umbrellas can be mounted to the Honey Badger using the umbrella shaft mount on the bottom of the flash unit. The shaft mount can accommodate the wide variety of Interfit brand umbrellas and parabolic umbrellas as well as most umbrellas up to a 3/8” (8mm) diameter pole.
Using Your Honey Badger Powering Up Your Honey Badger Plug in the 13’ power cable included with your Honey Badger kit to the back of the unit and plug into a 110V/ 60Hz (220V/50Hz) grounded power outlet. Activate power with the ON/OFF switch on the back control panel of the flash head. TEST Using the Test Function The Test button will illuminate red when the flash is charged and ready for use.
GROUP Setting Groups **Setting the control channel is only necessary when using the Interfit remotes. If you are using a third-party radio system or optical slave, you can skip this section. When using an Interfit TTL remote, only groups A-C are available. Setting the control group allows you to independently control the power of each light in your studio without affecting your other lights. Your Honey Badger can be set to eight different control groups (A-H).
Specifications of the Honey Badger Max Watt Seconds 320Ws Power Range 7 Stops Guide Number 148 (100 ISO, 1/125, 1 meter, 7” reflector) Variability 1/10th stop increments Recycle Time 1 second at full power Flash Duration 1/900@ full power Color Temperature 5500K +/- 200K Modeling Lamp 60w LED (Proportional) Wireless Control Yes Shooting Mode Manual Max Sync Speed 1/250 Fan Cooled Yes Auto Dump Yes Temperature Regulation Yes
