lighting your creativity BADGER UNLEASHED BATTERY-POWERED 250Ws TTL/HSS FLASH Instruction Manual www.interfitphotographic.
Badger Unleashed Battery-Powered 250Ws TTL/HSS Flash What’s cool about the Badger Unleashed? Building off the success of the Honey Badger, the Badger Unleashed shreds the restraints of an AC power cable and now roams free thanks to a drop-in Lithium-Ion battery. Add in High-Speed Sync and TTL capabilities, a 1.
Table of Contents Badger Unleashed Overview............................................................ 3 Accessorizing the Badger Unleashed............................................. 4 Protective Cap............................................................................ 4 Bowens® Mount Modifiers....................................................... 4 Softboxes.................................................................................... 4 Umbrellas.............................................
Badger Unleashed Overview 11 14 13 1 15 16 12 2 17 3 4 10 18 5 9 8 6 7 19 20 21 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Optical Slave Cell LCD Battery Indicator Beep Button Cell Button Flash Test Button On/Off Switch Power / Select Dial Modeling Lamp Button Flash Mode Button Channel & Group Button LCD Display 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22.
Accessorizing the Badger Unleashed Protective Cap Every Badger Unleashed flash head includes a protective end cap. The end cap offers protection to the glass dome, flash tube, and LED modeling lamp during transportation and storage. To remove the protective cap, pull back on the modifier quick-release on the top of the flash unit to release the mount lock. While holding back the release button, twist the cap counter-clockwise.
Accessorizing the Badger Unleashed Umbrellas Umbrellas are the most widely used modifiers in photography. Their ease-of-use and versatility makes them quick to master; a go-to modifier in many situations. Umbrellas can be mounted to the Badger Unleashed using the umbrella tension mount on the bottom of the flash unit. The shaft mount can accommodate the wide variety of Interfit brand umbrellas and parabolic umbrellas as well as most umbrellas up to a 3/8” (8mm) diameter pole.
Using the Badger Unleashed Powering On/Off To power on your light, simply insert the battery to the battery compartment of the flash head until it clicks and flip the power switch from “O” to “I”. WARNING: If the light displays a “P1” error code on the screen, the light is overheating and must be turned off for at least 15 minutes to allow the internal components to cool down. Adjusting the Flash Power Your Badger Unleashed is packed with 250Ws of power.
Using the Badger Unleashed BEEP Beep Button Press the “BEEP” button to turn on or off the beeping sound for button presses, flash power adjustments, and flash refresh notifications. CELL Optical Slave Cell The Optical Slave Cell allows the Badger Unleashed to be triggered from the flash pulse of another unit. Press the “CELL” button to toggle on and off the Optical Slave Cell. NOTE: Using the Optical Slave Cell requires direct line-of-sight between the lights.
Using TTL (Through-The-Lens Metering) TTL (Through-The-Lens Metering) is an automatic flash exposure that is predetermined by your camera’s settings and internal light meter. TTL is most useful in rapidly changing lighting environments. When the TTL shooting mode is selected with the Interfit TTL remote, power adjustment on the remote will change to a +/- display. The light output will be automatically set by the camera but can be fine-tuned using exposure compensation.
Badger Unleashed Specifications Max Watt Seconds 250Ws Power Range 9-Stops (250Ws – 1Ws) Variability 1/10th stop increments Recycle Time 1.5 seconds at full power Color Temperature 5500 ±100K Modeling Lamp 15W/5500K, 90+ CRI Wireless Control Built-in receiver Shooting Mode Manual, TTL, HSS, Multi (w/ Gen. 2 TTL remotes, 2020) Max Sync Speed 1/250 sec. normal sync, 1/8000 sec.
