Assembly Instructions

Part List

Key

Description

Qty.

Part

ATTENTION: Make certain that all screws are fully tightened before using chair.

Lubricate all moving parts and tighten all screws every 6 months or as needed.

Step 1

Turn Base “B” upside down.

Insert Casters “A” into Base “B”.

Step 2

Attach Right Armrest “D” to Seat Cushion “C” with

Armrest Screws “F” and Flat Washers “G”. Repeat for

Left Armrest “E”. NOTE: Arrows on armrests point to

front of seat cushion and fully tighten all screws.

Step 3

Attach Mechanism “H” to Seat Cushion “C” with

Mechanism Screws “I”.

NOTE: Fully tighten all screws.

Step 4

Attach Backrest “J” to the rear of Mechanism “H”

with Backrest Screws “K”.

NOTE: Fully tighten all screws.

Step 5

Insert Gas Lift “M” into hole on Base “B”.

Step 6

Place seat assembly onto Gas Lift “M”. Push firmly

on the chair seat to securely attach seat assembly to

seat post.

x 5

ITEM NO.: 695729

ASSEMBLY INSTRUCTIONS

x 3

x 4

x 3

PAGE 1
ASSEMBLY INSTRUCTIONS ITEM NO.: 695729 Key Description Qty. A 5 B 1 C D Step 2 Step 1 Part List Part Attach Right Armrest “D” to Seat Cushion “C” with Armrest Screws “F” and Flat Washers “G”. Repeat for Left Armrest “E”. NOTE: Arrows on armrests point to front of seat cushion and fully tighten all screws. Turn Base “B” upside down. Insert Casters “A” into Base “B”. L A B 1 x5 G F G 1 F Step 3 Attach Mechanism “H” to Seat Cushion “C” with Mechanism Screws “I”.
PAGE 2
CONTROL INSTRUCTIONS ITEM NO.: 695729 ARM HEIGHT ADJUSTMENT To adjust arm height, push button (1) in to allow the arms to move up or down freely, release button (1) once the desired height is reached. BACK ANGLE ADJUSTMENT To lock, return the back to the upright position and push lever (2) in. To unlock, pull lever (2) out. SEAT HEIGHT ADJUSTMENT To raise seat height, remove pressure from the seat and lift lever (2). To lower seat height, sit on the chair and lift lever (2).