Installation Instructions

1035 Series Miniature Surface Mount Self-Adhesive

Magnetic Contacts

1035, 1035W, 1037W

Determine the positions of contact and magnet. Clean surface with alcohol before

attaching contact and magnet (this will improve the adhesion of the urethane foam to

the surface). Remove protective backing from foam strip, press contact and magnet

firmly to surface.

PK-0989 Rev F 10/01

ULC Specifications

All Contacts: 30 V DC, 50 ma max. Gap Specifications:*

See UL Gap Specifications

* Gap Specifications are nominal and may vary ± 20%. Gap Specifications are for switch to make. Break

distace is approximately 1.1 to 1.5 times make.

Magnet

Part No. 1927

(included)

0.25"

0.64 cm

0.375"

0.95cm

1.50"

3.81cm

** FORM A (1035, 1035W)

Voltage: 100 VAC/DC Max

Current: 0.5 A Max

Power: 7.5 W Max

FORM C (1037W)

Voltage: 30 V Max

Current: 0.25 A Max

Power: 3.0 W Max

Part Loop Electrical Gap Distance*

Number Type Configuration

1035 Closed N/O 5/8"

1035W Closed N/O 1"

1037W Open or Closed SPDT 1"

UL Specifications ** European Union Specifications: 48 VAC/DC Max., 0.5 Amp