Installation Manual User guide

Concord Express Installation Instructions 107
Appendix C
Software release notes
and specifications
Software Version 1.73
The following features were changed/added for software version 1.73.
Downloader Code
• If the Dealer Code (0002) is set, the Installer Code (0001) can’t view or edit
the Downloader Code (0000)
• Downloader Code and CS Phone Numbers (0100/0110) are NOT reset by a
memory clear operation using the Installer Code if the Dealer Code has been
set. Using the Dealer Code for memory clear will include Downloader Code
and CS Phone Numbers in the memory clear.
SIA False Alarm
• SIA False Alarm (0003) option has been added to control access to Silent
Arming (21) in user programming. If SIA False Alarm is off, Silent Arming is
available in user programming. If SIA False Alarm is on, Silent Arming is
forced to off and is not available in user programming. SIA False Alarm
defaults to on.
• SIA False Alarm control annunciating alarm level changes on exterior sirens.
If SIA False Alarm is on, the arming level is annunciated on exterior siren
output during an arming level change that is initiated by an RF device
(touchpad or keyfob). If SIA False Alarm is off, the arming level is NOT
annunciated on exterior siren output.