Installation Manual User guide

Chapter 2
Concord Express Installation Instructions 29
6. After programming is completed, simply disconnect the touchpad from the
panel header.
Touchpad Button Programming Functions
In program mode, the touchpad buttons let you navigate to all installer
programming menus for configuring the system. Table 3 below describes the
touchpad button functions in program mode.
Table 3: Alphanumeric touchpad buttons
Button
Programming function
#
Selects menu item or data entry.
*
Deselects menu item or data entry (if pressed before #).
A & B
Scroll through available options at the current menu tier. Also scroll through
sensor text options during sensor text programming.
C
Enters pauses when programming phone numbers.
D
Deletes certain programmed settings.
0 thru 9
Enter numeric values wherever needed.
1 & 2
Select off (1) or on (2) wherever needed.
1 thru 6
Press and hold to enter alphabetical characters A thru F for account numbers.
7 or 9
Press and hold to enter * (7) or # (9) for phone numbers.
Moving Through Program Mode Tiers and Menus
There are two basic tiers of programming menus. Tier 1 menus are accessible
immediately after entering program mode (see Figure 21 below).
Figure 21: Tier 1 programming menus
Arrows pointing right represent pressing B, arrows pointing left represent
pressing A.