Installation Manual User guide

Chapter 2
68 Concord Express Installation Instructions
Silent Arming (21)
Options (Default=off)
This setting determines whether
the partition arms the system with
(off) or without (on) sounding
status beeps from sirens and the
touchpad.
Note: Turning this feature on will
double the exit time. This option
is not available when SIA False
Alarm Reduction (0003) is on.
To turn Silent Arming off or on:
1. Enter user programming mode with the system master
code. The display shows TIME AND DATE.
2. Press A or B until the display shows OPTIONS.
3. Press #, then B and the display shows SILENT ARMING
OFF/ON (current setting).
4. Press 1 (off) or 2 (on). The display flashes the entered
selection. Press # and the display shows the new setting.
Touchpad Brightness (22)
Options (Default=2)
This setting lightens or darkens
the background on touchpad
displays. Each touchpad display
can be set independently to
compensate for lighting
conditions in the touchpad
location.
To adjust Touchpad Brightness:
1. Enter user programming mode with the system master
code. The display shows TIME AND DATE.
2. Press A or B until the display shows OPTIONS.
3. Press #, then B twice and the display shows TOUCHPAD
BRIGHTNESS n (current setting).
4. Enter a setting from 0 (darkest background) to 3 (brightest
background). The display flashes the entered selection.
Press # and the display shows the new setting.
Chime On Close (25)
Options (Default=off)
This setting determines whether
or not a single chime is sounded
when a perimeter door or window
is closed.
To turn Chime On Close off or on:
1. Enter user programming mode with the system master
code. The display shows TIME AND DATE.
2. Press A or B until the display shows OPTIONS, then
press #. The display shows DOWNLOADING OFF/ON.
3. Press A or B until the display shows CHIME ON CLOSE
OFF/ON (current setting).
4. Press 1 (off) or 2 (on). The display flashes the entered
selection. Press # and the display shows the new setting.
System Version Menu
The SYSTEM VERSION menu lets you view and identify panel hardware and
software. This information is primarily used for troubleshooting purposes.