User Manual

20 Concord Express User Instructions
Short System Status
A Short Status indicates the current arming level, sensor status (whether open or
bypassed), low battery, supervisory, AC power or backup battery failures.
To get a Short System Status:
Press *.
The system sounds beeps according to the current arming level. (One for
Level 1, two for Level 2, three for Level 3.)
Touchpads display the status information, for example:
“System is OK,” or “SENSOR 02 OPEN.”
If an alarm or system trouble condition has occurred, it is displayed on a
touchpad the first time you perform a Short or Full Status check. Performing a
system status check a second time displays the system status including any
trouble conditions.
If any alarm or system trouble is active, it continues to show up in every status
check until the system is disarmed.
Full System Status
Note: A Full System Status is not available from the fixed display touchpad.
A Full Status combines the Short Status information with added details about
specific system features.
To get a Full System Status:
Press * + *. Interior sirens sound beeps according to the current arming level.
Touchpads display the status information, for example, “SENSOR 03
BYPASSED,” “SYSTEM BATTERY IS OK,” or “AC POWER IS OK.”
System Alarm Sounds
The sirens and touchpads in your system emit alarm sounds whenever an alarm
occurs, either by a sensor or panic button activation. Each type of alarm sounds
and reacts differently when activated, as described in the following table.
Type of alarm
Alarm sound
Repeating series of three beeps
Continuous Tone