User Manual

26 Concord Express User Instructions
To set the system date:
1. Enter the programming menus by pressing 9 + System Master Code.
2. Press 01.
3. Enter the current date as 6 digits (mm/dd/yy) then press #.
4. Press * + 4 + # to exit the programming menus.
Adjusting System Sounds and Touchpad
Brightness
Arming Your System Silently
Use the Silent Arming feature to arm your system without disturbing people
throughout the house with arming status beeps. There are two methods for
implementing Silent Arming:
• Silent on Demand (User presses 5 before arming.)
• Arming Always Silent (Silent Arming feature on).
Regardless of the method employed, when Silent Arming is in effect, no Exit
beeps sound.
Note: Protest beeps will always sound when bypassing a sensor.
Silent Arming on Demand
Pressing 5 before arming silences arming status beeps from touchpads and
interior sirens.
To use Silent Arming on demand:
1. From any touchpad, press 5.
2. Within 4 seconds enter: 2 + Code or 3 + Code.
Arming Always Silent
Note: Arming Always Silent may have been disabled by your installer.
Turning this feature on in the programming menu means that the status beeps
that come from touchpads and interior speakers while arming will always be
silent. You will not have to enter 5 before arming, as with Silent Arming on
Demand.
See “Appendix C: Programming Your System” on page 50 for more detailed
information on setting this feature.