User Manual Owner's manual

9BChapter 10: Recording
96 TruVision DVR 41 User Manual
Note: You must set the storage mode of the HDD to Group before configuring
the redundancy. See “Setting up HDD groups” on page 122 for more
information.
To set up HDD redundancy:
1. Click the System Setting icon in the menu toolbar and select Hard Disk.
2. Click the HDD Information tab and select the HDD to be used for
redundancy and click Edit.
3. In the Local HDD Settings window, select Redundancy.
Verify at least one other HDD is set to R/W (read/write).
4. Click Apply to save the settings and then OK return to the previous screen.
5. In the menu toolbar, click the Video Schedule > Encoding.
6. Select the camera to be used for redundancy.
7. Check Redundant Record/Capture.
8. Click Apply to save the settings.
9. Repeat steps 7 to 9 for other cameras whose files you would like to be
redundantly recorded.
10. Click Back to return to live view.
Note: The HDD set to redundancy stores an extra copy of the recording.
When an HDD is set to redundancy, at least one other HDD must be set to
the R/W status.