User Manual Owner's manual

4BChapter 5: Live view
TruVision DVR 41 User Manual 31
Figure 12: The mouse menu for the main monitor
The list of commands available depends on which monitor is active; main or spot
(monitor B). See Table 7 below. The default settings of these commands are
provided in Appendix G, “Default menu settings” on page 165.
Table 7: Mouse menu for monitor A (main monitor)
Item
Name Description
1
. Menu Enter the Main menu.
This option is not available from monitor B.
2
. Single camera Switch to a full-screen view for the selected camera from
the dropdown list.
3
. Multi camera Switch between the different multiview options from the
dropdown list.
4
. Previous screen Display the previous camera.
5
. Next screen Display the next camera.
6
. Start auto-switch Turn on sequence mode. The screen automatically
sequences between cameras. See “Viewing in multiview”
on page 32.
Go to Menu > Display Mode Settings > Layout > General >
Dwell Time to set up.
7
. All-day playback Playback the recorded video of the selected day from the
selected camera. The current day is selected by default.
See “All-day playback” on page 55 for more information.
8
. Monitor B Switch between monitors A (main) and B (spot).
9
. Advanced search Enter the advanced video search menu. See “Searching
recorded video” on page 56 for more information.
10
. Output mode Select desired output mode: Standard, bright, soft, and
vivid.
11
. Close timebar Open/close the time bar.