User Manual Owner's manual

4BChapter 5: Live view
TruVision DVR 41 User Manual 41
Option
Description
Enable wizard
Define whether the wizard tool starts when the DVR is turned on.
Check the box to enable/disable and click Apply.
Figure 20: Monitor setup screen: More Settings
Table 13: Description of the Monitor setup screen: More Settings
Option
Description
Monitor standard
The video standard used is auto detected but can be manually
changed.
Modify the video standard used to PAL or NTSC and click Apply.
Output mode
Define the desired output mode.
Select one of the options from the drop-down list: Standard, Bright,
Gentle, or Vivid.
Monitor brightness
Modify the video output brightness.
Adjust the scroll bar point to the desired level and click Apply.
Event hint
Define whether the status icons appear on screen. See “Status
information” on page 29 for more information.
Timebar transparent
Modify the transparency of the menus on-screen relative to the
background to make the menu screens easier to read or less
prominent on-screen. Default is non-transparent.
Select one of the options from the drop-down list.
Men
u timeout Define the time in minutes after which the menu screen reverts to
live view mode.
Select a time from the drop-down list and click Apply.
Mouse pointer speed
Modify the speed of the mouse pointer.
Adjust the scroll bar point to the desired level and click Apply.
Other notification: Panel
alarm LED
Check to enable the Motion alarm option.
Motion alarm
Define whether the status LEDs on the front panel start flashing
when motion is detected.
Check the box to enable/disable and click Apply.