User Manual Owner's manual

8BChapter 9: Using the web browser
TruVision DVR 41 User Manual 75
Table 17: Description of remote configuration menus
Menu Function Description
Device parameters Device information Device name: Define the DVR name. The default
name is TVR 41.
Device number: The device number to use for
the DVR when programming the remote control.
The default value is 255.
Zone ID: Each DVR in a daisy chain must have a
unique zone ID so that it can be controlled by a
KTD-405. The default value is 1.
Overwrite: Enable or disable. Enabling this
setting causes recorded files to be overwritten
once the HDD is full.
eSATA: Define how an external recording device
saves records. See “Using an external recording
device” on page 89 for more information.
Event priority: Define the priority between text
insertion event and motion alarm if both are
triggered at the same time. Default is Motion
alarm (Text In < Motion).
Time settings Define time and date. See “Configuring time and
date” on page 38 for more information. See
“Configuring an NTP server” on page 112 for
information on setting up NTP time settings.
Holiday settings Define when recordings occur during holiday
periods. See “Holiday schedules” on page 92 for
more information.
Camera settings Display settings Define which information is displayed on-screen.
See “Configuring the camera OSD settings” on
page 129 for more information.
Video settings Define general recording settings. See “Defining
a recording schedule” on page 90 for more
information.
Recording schedule Define the recording schedules. See “Defining a
recording schedule” on page 90 for more
information.
Motion detection Define motion detection parameters. See “Setting
up motion detection” on page 100 for more
information.
Privacy mask Define the on-screen privacy mask areas. See
“Setting up privacy masking” on page 130 for
more information.
Tamper-proof Define the video tampering detection settings.
See “Detecting video tampering” on page 106 for
more information.
Video loss Define the video loss detection settings. See
“Detecting video loss” on page 105 for more
information.
Text overlay Add extra lines of text on screen. See “Text
overlay” on page 83.