Cut Sheet

Energy Controls

Project:

Location:

Product Type:

Contact/Phone:

Model #:

RZ Series

Vibration Hour Meters

The RZ Series Vibration Hour Meters record the running time of

machines, vehicles, and equipment, which vibrate during operation.

The automatic mechanism in this meter converts vibrations into

energy, which drives the hour meter and minute hand. It is uniquely

sensitive and capable of operating from a slight vibration, such as

a moving car.

Features

• No wires, no cable

• Horizontal and vertical installation

• Activated by vibration

• Front panel is dustproof and waterproof

Ratings

Dimensions:

(H x W x D) RZ 52/60/52D Ø 58 x 75/65 x 75/80 x 75 mm

Panel Cutouts: Ø 52/60/71 mm

Mounting Depth: 67.5/69/59 mm

Weight: 145g/185g (RZ-D)

Ambient Temperature: 5˚F to 140˚F (-15˚C to 60˚C)

Protection Quality: IP 65, front panel is dustproof and

waterproof

Moving Force: Vibration and energy transformer

Accuracy: +/-3% at uninterrupted operation

Counting Range: 99,999 hours

Mounting/Installation: Wall mounting

Mounting Position: RZ 52 H to 45˚

RZ 52 V to 45˚

Ordering Information

RZ52 = Model Reference (listed below)

D = Rubber Mounting

H = Horizontal Installation

V = Vertical Installation

RZ52

Vibration Hour Meters

PAGE 1
RZ Series Vibration Hour Meters Project: Location: RZ Series Vibration Hour Meters The RZ Series Vibration Hour Meters record the running time of machines, vehicles, and equipment, which vibrate during operation. The automatic mechanism in this meter converts vibrations into energy, which drives the hour meter and minute hand. It is uniquely sensitive and capable of operating from a slight vibration, such as a moving car.
PAGE 2
RZ Series Diagrams 2.28" [58 mm] 2.05" [52 mm] .30" [7.5 mm] 2.95" [75 mm] 2.60" [66 mm] h-horizontal v-vertical 45º 45º Acceptable Mounting Angles Energy Controls www.intermatic.