Instructions / Assembly

ITEM : C
-
617
ISSUED OCT 07, 2014
Printed in Vietnam
- 3 -
HARDWARE LIST
When unpacking, please carefully not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO
Description
Q
ty
Sketch
NO
Description
Q
ty
Sketch
1
Short bolt
( M6 x 35mm)
2 2
Long bolt
(M6 x 60mm)
8
3
Screw
(M4 x 35mm)
8 4
Lock Washer
(6.5 x 11mm)
10
5
Flat Washer
(6.5 x 19mm)
10 6
Allen Key
(4x80mm)
1
STEP 1
Attach seat frame (B) to the back (A) by using bolts (2), washers (4) and (5), as shown below. Tighten
with Allen key (6).
Attach Side Stretcher (E) to the back (A) by using bolts (1), washers (4) and (5), as shown below.
Tighten with Allen key (6).
Note: DO NOT tighten any of the bolts, until the chair is assembled, then put on a flat level surface to
make sure the chair is level and then tighten the bolts.