Manual

OPERATING THE MACHINE
 When the machine is delivered, the function
of the user interlock is switched off.
For information on activating the user interlock,
      

     
continue depending on the actual programmed
mode as follows:

 
  of the function button (2)
       
loaded.

 While switching on the machine subject to
the procedure described below, the user interlock
will be temporarily deactivated.
 
    
(10) lights up.
 
(4) pressed simultaneously for approx. 2 secs.
  of the function button (2)
not
 
  of the function button (2)

display (10) goes out.
The machine can be loaded.
 When the machine is switched on again
      
interlock must be deactivated again.

Feed paper into the cutting mechanism through
the paper feed slot (12) (Fig. 3).
Feed data carriers     
into the cutting mechanism individually into the
separate safety feed slot (13) (Fig. 3).
The machine automatically switches to forwards
running, draws the material in and automatically
switches off after shredding.
When shredding papers, do not shred
CD/DVD at the same time, and vice
versa!
     
machine must be manually switched to forwards
running (press and hold the forwards button (3)
for approx. 2 secs.).
 
function), the shredding process can be stopped
at any time. To continue, press and hold the
forwards button (3) for approx. 2 secs.

      
   user interlock is switched on, it
must be deactivated again when the machine
is switched on again ( OPERATING THE
MASCHINE).
Never feed the shredder with a quantity
of material exceeding the maximum
indicated. Refer to the TECHNICAL
DATA section!
Should the machine become
overloaded, follow the instructions under
“MATERIAL JAM IN MACHINE” under
“MALFUNCTIONS”.

A two compartment receptacle ensures that waste
       
(14) and a separate collection tray (15) for the

The ll level of the collection tray
(15) is not displayed by the control
display!
When shredding large quantities of CDs/
DVDs (approx. 25 per load), please
check the ll level of the collection
tray occasionally and empty the tray
separately as required.
        
switches off. The control display (11) lights up.
Proceed as follows:
- Pull the receptacle (14) with the collection
tray (15) out of the lower housing. The control
display (8) lights up and the control display
(11) goes out.
- Dispose of the contents of the containers
separately.
- Push the empty receptacle with the collection
tray back into the lower housing. The control
display 
in one of the feed slots, the control display
(6) now lights up.
       
remaining material is shredded and the display
(6) goes out.
 The machine only runs when the receptacle
is fully pushed in!

By keeping the function button (2) pressed for
       

user interlock is switched on, the locking function
of the user interlock is simultaneously activated.
       
deactivate the user interlock, please refer to
OPERATING THE MASCHINE


To enter programming mode, the machine must
OPERATING THE
MASCHINE).
Proceed as follows:
- Pull out receptacle (14) until the control display
(8) lights up.
- Press and hold forwards button (3) for approx.
 
You are now in programming mode.

programming time window of approx. 20 secs.,
     
mode.
Programming sequence

 
- Press forwards button (3) and backwards button
(4) simultaneously and keep them pressed until
the control displays (10), (2) and (4)

- Push receptacle in again.
Programming is complete. Programming mode is
switched off automatically. The control displays
(10), (2) and 
5 secs to indicate completion of programming.
Programming sequence
to switch user interlock
 
- Press forwards button (3) and backwards button
(4) simultaneously and keep them pressed until
the control displays (10) and 
- Push receptacle in again.
Programming is complete. Programming mode is
switched off automatically. The control displays
(10) and 
to indicate completion of programming.
26SC2 26CC3 32SC2 32CC3
3
9
10
11
4
6
7
8
2
15
14
89894 8 03/13
6
GB
OPERATION



