Operation Manual

42
7.6 Error Codes and Diagnostic Codes
Blink
code
Fault Consequence
for the Scooter
Comments
1
Battery must be
charged
Continues to
drive
• The batteries are discharged. Charge the
battery as soon as possible.
2
Battery voltage too
low
Stops driving
• The batteries are depleted. Charge
batteries.
• If you switch the Scooter off for a few
minutes, the battery can often recuperate
to such a stage that a short journey is still
possible.
3
Battery voltage too
high
Stops driving
• The battery voltage is too high. If the
battery charger is connected, disconnect
it from the Scooter.
• The electronic system charges the
batteries when running downhill and
when braking. This fault is caused when
the battery voltage becomes too high
during this process. Switch the Scooter
off and on again.