Operation Manual

78
11.1.1 Mending punctures (pneumatic tyres of type 4.00 - 5)
Requirements:
• Open spanner, 17 mm.
• Rubber hammer
• Raise the vehicle and place wooden blocks underneath to
support it.
• Remove the wheel locknut (1) with a 17 mm open-ended
spanner.
• Remove the wheel by tapping it gently with the rubber
hammer on the rear face to carefully loosen it from the axle.
Problems when removing wheel?
It may be necessary to use a special tool Please ask your Invacare® dealer to help you.