User Manual

• Medium: When Medium Speed is selected, indicated by number ‘’02’’ on the digital display,

the fan is set at medium speed.

• High: When High Speed is selected, indicated by number ‘’03’’ on the digital display, the fan

is set at maximum speed. This option is ideal for air purication in areas with a larger air

quality issue.

• Auto: When Auto is selected, indicated by the letter A on the digital display, the fan speed

will be automatically adjusted based on the humidity level inside the room. The fan speed

can change between low, medium, and high.

The adjustment of the fan speed is not available during Sleep mode

(set at low speed) and during Dry Clothes mode (set at high speed).

TIMER

Press the “ ” button to set up timer for automatically turn o.

• Any time this button is pressed, the set time is increased by 1h (hour), for auto STOP of

the device. This function oers the selection of when the device will automatically turn o

within a range from 1h to 9h (hours).

• Once the desired hour(s) selected, wait for 3 seconds without pressing anything and the

indication of timer will appear on the digital display to conrm that timer is activated.

• For auto STOP the device should be left continue its function.

In the event of a power failure the timer function is not restored after

power resumes.

SWING LOUVER

Press the ‘’

’’ button to activate/deactivate this feature.

• By pressing the button once, the swing louver operates in such a manner allowing a multi-

directional air stream.

• By pressing the button a second time, the louver can be stopped at a desired angle. This

option is selected for a direct air ow ideal for drying clothes.

ENERGY SAVING FUNCTION

The Energy Saving function is activated by default in your device. During

this function the dehumidier will turn o automatically after 12 hours of

operation, regardless any timer settings. To deactivate it, press continuously

for 2 seconds the buttons, '' '', '' '', '' '' and '' ''.

In the event of power loss, the setting will return to its default mode and the

energy saving function will be activated again.