User Manual

6
EN
2. ELECTRICAL INFORMATION
The nameplate with all the electrical and technical data of this appliance, is located on the
οpposite site of the unit.
l The appliance should be installed in accordance with national wiring regulations.
l Be sure the device is grounded properly. Proper grounding is important as it minimizes
the chance of electric shock or re. The power cord is equipped with a grounding
plug for protection against electric shock hazards.
l The device must be used in a properly grounded wall socket. If the specic socket you
intend to use is not adequately grounded or protected by a time delay fuse or circuit
breaker, have a qualied electrician install the proper receptacle.
l Ensure the wall socket is still accessible after the installation of the dehumidier.
l Do not use extension cords or adapter plugs with this device.
l To avoid personal injury, always disconnect the power supply of the device, before
maintenance.
Power o the dehumidier before removing the plug.
3. SOCIABLE REMARKS
ENVIRONMENTAL PROTECTION
Disposal of equipment no longer used:
Please follow the instructions below, when using this dehumidier in European
countries.
l This appliance requires special treatment for disposal. In the European Union,
electronic equipment must not be treated as domestic waste, but must be disposed
of professionally in accordance with Directive 2002/96/EC of the European Parliament
and Council of 27th January 2003 concerning old electrical and electronic equipment.
The disposal of this unit should follow all legal requirements and should not be
disposed as unsorted municipal waste.
The hazardous substances can leak into the ground water supply thus entering the
food chain, endangering your health and the environment.
l There are several alternative solutions for disposal:
A) Your local municipality has established free collection systems for
electronic waste.
B) Your local retailer upon purchase of a new product.
C) The manufacturer may accept the old appliance for disposal.
D) Old appliances sometimes contain valuable resources for scrap metal
dealers.