Operation Manual

14
INPUT
DVB-S2 QPSK/8PSK Demodulation
Input frequency range 950~2150MHz
Input level -65~-25dBm
Input impedance 75Ω
Connector F Connector
Symbol rate 5~45Msps for QPSK; 10~31Msps for 8PSK
Rolling off factor 0.35 for QPSK; 0.35, 0.25, 0.2 for DVB-S2
Punctured rates DVB-S2 QPSK: 1/2,3/5,2/3,3/4,4/5,5/6,8/9,8/10
DVB-S2 8PSK: 3/5,2/3,3/4,5/6,8/9,9/10
DVB-S: 1/2,2/3,3/4,5/6,6/7,7/8
LNB Level 0, 13V, 18V
0/22K 0/22K
DiSEqC DiSEqC 1.0
DVB-C QAM Demodulation
Tuner Input symbol rate 1~7Mbps(PAL) or 1~6Mbps(NTSC)
Demodulation 16/32/64/128/256 QAM
Tuner Bandwidth 6MHz or 7MHz or 8MHz
Input frequency range 50~860MHz
Digital signal Input level -15~15dBmV
Input connector IEC Female (7/8MHz) or F Female (6MHz)
Input impedance 75Ω
DVB-T COFDM Demodulation
Constellation QPSK, 16-QAM, 64-QAM
Tuner bandwidth 6MHz/7MHz/8MHz
FFT mode 2K/8K
Guard interval 1/4, 1/8, 1/16, 1/32, off
FEC code rate 1/2, 2/3, 3/4, 5/6, 7/8
Input frequency rate 470-862MHz (8MHz); 174-230MHz (7MHz)
Digital signal Input level -20~-70dBmV
Input connector IEC Female (7/8MHz) or F Female (6MHz) Input
Input impedance 75Ω
DS3 Input
Input connector BNC Female
Input impedance 75Ω
Max input code rate 44.736Mbits/s
Format Unframed Framing according to G.804 / G.752 (DS3)
Note: In the options you can also use navigation «Left» and «Right» key to change the settings (not for all
settings).
OUTPUT
DS3 loop through output
Connector 75Ω, BNC female
Max. output code rate 44.736Mbits/s
Format Unframed Framing according to G.804 / G.752 (DS3)
TS over IP Output
Connector RJ45 10/100Base-T
Max. output code rate 70Mbits/s
UDP/RTP Multicast or Unicast
Multicast control protocol IGMPV2
7. Technical Specifications