Network Device User Guide SBG1000

8 SBG1000 Wireless Cable Modem Gateway User Guide

Home

ExitPrint

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License

Configuration: Basic Gateway TCP/IP Wireless Print Server USB

Rear Panel

The rear panel provides cabling connectors, status lights, and the power receptacle:

Key Item Description

1 The printer port provides a connection for one printer.

2 The Motorola SBG1000 Wireless Cable Modem Gateway includes two antennas. The optional

Motorola External Diversity Antenna provides higher gain to increase wireless LAN performance and

coverage. For information about the External Diversity Antenna, see “Optional Accessories” on

page 4.

3 Use the HPNA ports to connect an HPNA LAN:

• Connect the bottom HPNA port to the telephone jack using the supplied telephone wire terminated

with RJ-11 connectors.

• You can connect a telephone to the top HPNA port.

4 Use Ethernet ports 1 to 5 to connect an Ethernet LAN cable with RJ-45 connectors. You can connect

Ethernet-equipped computers, hubs, bridges, or switches.

5 Use the USB port for Connecting a PC to the USB Port (see page 24).

•

If you experience a problem, you can push this recessed button to restart the SBG1000 (see

“Troubleshooting” on page 121). To reset all values to their defaults, hold down the button for more

than five seconds

. Resetting may take 5 to 30 minutes because the SBG1000 must find and lock on

the appropriate communications channels.

7 The cable port provides a connection to the coaxial cable outlet.

8 The power connector provides power to the SBG1000.

1 3 46 85 72 2

…