User Manual

9. Display: Displays the current radio station, battery status, and Bluetooth status.

• Charging Indicator:

• When the power cable is connected, movement of the battery segments shows the battery is

charging. When fully charged, all battery segments will be lit without blinking.

• When the power cable is disconnected, the battery segment shows the level of the battery.

• When the battery level is low, the bottom battery segment will blink.

• If a front panel button is not pressed within 60 seconds, the battery level indicator will turn off

(to save energy). The battery level indicator will reappear when any button is pressed. Also,

when the battery gets to the lowest battery icon segment, the battery level indicator will turn

back on.

• Lightning Bolt Icon: The lightning bolt icon will illuminate when the power cable is connected to

wall power.

• Bluetooth Icon: The Bluetooth icon will be lit solid when a device is paired to Party Boom.

• Power Icon: The power icon will be lit when Party Boom is powered on. The power icon will not

be lit when Party Boom is powered off.

• Bass Boost Icon: The Bass Boost icon will be on when the Bass Boost function is activated. The

icon will be off when the function is deactivated.

• Link Icon: The Link icon will be on when stereo linked to another speaker. The Link icon will be

off when a single speaker is used.

10. Master Volume Control: This adjusts the speaker’s main mix volume, which includes the Microphone

Input, Auxiliary Input, Radio, and the audio of a paired Bluetooth device.

11. Microphone Input with Volume Control (1/4”): This mono input accepts a 1/4” (6.35 mm) input such

as a microphone, guitar, or other musical instrument.

12. Auxiliary Input: This stereo 1/8” (3.5 mm) input can be used to connect a CD player, MP3 player, or

other audio source.

13. USB Charging Port: Connect your device’s charge cable here to charge it. USB charging only

functions when the unit’s power is turned on.

Top Panel

1. NFC: Tap your NFC (near-field communication) supported and enabled device

here to pair your phone by gently bumping on the ‘N’ logo.

Rear Panel

1. Power Cable Input: Insert the included power cable here to charge the

unit. Note that the Party Boom can be used with the power cable while

it simultaneously charges the battery.

2. Fuse Cover: If the unit’s fuse is broken, use a screwdriver or other tool

to lift this tab to replace the fuse. Replace it with a fuse of the same

rating. Using a fuse with an incorrect rating can damage the unit and/or

fuse.