Quick Start Guide

Manual v1.11
Party Rocker Max Quickstart Guide (English) Safety & Warranty Information
Product Warranty
(for products purchased in the U.S.A.)
1. What is covered and for how long?
All Products: ION Audio, LLC (“ION Audio”) warrants to the original purchaser that ION Audio products and
all other accessories are free from defects in material and workmanship under normal use and service for
the period commencing upon the date of purchase from an authorized ION Audio dealer and continuing for
the following period of time after that date for ninety (90) days. ION Audio warrants factory-refurbished
merchandise to be free of material and operational defects for a period of ninety (90) days from the original
date of retail sale. This refurbished merchandise warranty is not transferable.
2. What is not covered? This Limited Warranty is conditioned upon proper use of the product by the purchaser.
This Limited Warranty does not cover: (a) damage caused by improper installation or improper connection to
any peripheral; (b) damage caused by an external electrical fault; (c) damage from use of parts not
manufactured or sold by ION Audio; (d) product purchased from anyone other than an ION Audio authorized
dealer; (e) modifications to product not approved in writing by ION Audio; (f) equipment that has the serial
number removed or made illegible; (g) normal cosmetic and mechanical wear; (h) damage or loss during
transit to an Authorized ION Audio Repair Center; or (i) units that are purchased and/or located outside of the
continental USA.
3. What are ION Audio’s obligations? During the applicable warranty period, ION Audio will repair or replace, at
ION Audio’s sole option, without charge to the purchaser, any defective component part of the product. To
obtain service under this Limited Warranty, purchaser must first contact ION Audio and obtain a return
merchant authorization (“RMA”) number. Purchaser must then return the product to ION Audio in an adequate
container for shipping, accompanied by purchaser’s sales receipt or comparable proof of sale showing the date
of purchase, the serial number of the product, and the seller’s name and address. To obtain an RMA number
and assistance on where to return the product, contact ION Audio customer service at 401-658-3743. Upon
receipt, ION Audio will repair or replace the defective products. ION Audio may, at ION Audio’s sole option, use
rebuilt, reconditioned, or new parts or components when repairing any product or replace a product with a
rebuilt, reconditioned, new or comparable product. Repaired products will be warranted for a period equal to
the remainder of the original Limited Warranty on the original product or for 90 days, whichever is longer. All
replaced parts, components, boards, and equipment become the property of ION Audio. If ION Audio
determines that any product is not covered by this Limited Warranty, purchaser must pay all parts, shipping,
and labor charges for the repair or return of such product.
4. What are the limits on ION Audio’s liabilities? THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY,
TOGETHER WITH ANY IMPLIED WARRANTIES COVERING ION AUDIO PRODUCTS, INCLUDING WITHOUT
LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ION AUDIO SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL,
INDIRECT OR SIMILAR DAMAGES, LOSS OF PROFITS, DAMAGES TO PURCHASER’S PROPERTY, OR
INJURY TO PURCHASER OR OTHERS ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE ANY ION
AUDIO PRODUCT, BREACH OF WARRANTY, OR NEGLIGENCE, INCLUDING BUT NOT LIMITED TO ION
AUDIO’S OWN NEGLIGENCE, EVEN IF ION AUDIO OR THEIR AGENTS HAVE BEEN ADVISED OF SUCH
DAMAGES, OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. THIS LIMITED
WARRANTY IS THE COMPLETE WARRANTY FOR ION AUDIO PRODUCTS, AND IS GIVEN IN LIEU OF ALL
OTHER EXPRESS WARRANTIES. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER
THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER’S EXCLUSIVE REMEDY.
IF ANY PORTION OF THIS LIMITED WARRANTY IS ILLEGAL OR UNENFORCEABLE BY REASON OF ANY
LAW, SUCH PARTIAL ILLEGALITY OR UNENFORCEABILTY SHALL NOT AFFECT THE ENFORCEABILITY OF
THE REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND WILL
ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.
This Limited Warranty allocates risk of product failure between purchaser and ION Audio, and ION Audio’s
product pricing reflects this allocation of risk and the limitations of liability contained in this Limited Warranty. The
agents, employees, distributors, and dealers of ION Audio are not authorized to make modifications to this Limited
Warranty, or make additional warranties binding on ION Audio. Accordingly, additional statements such as dealer
advertising or presentation, whether oral or written, do not constitute warranties by ION Audio and should not be
relied upon.
5. How does state law apply to this warranty? SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO PURCHASER.
This Limited Warranty gives you specific legal rights. You may also have other rights, which vary from one
jurisdiction to another.
Please record the serial number of your unit as shown on the back of the chassis as well as the name of the
dealer from whom you purchased the unit. Retain this information and your original purchase receipt for your
records. Go to our website ionaudio.com to register your product with us.
Model: Purchased From:
Serial Number: Date of Purchase:
For warranty information for products purchased outside the U.S.A, visit:
ionaudio.com/warranty
Return Information
• A return merchant authorization number must be obtained from your local ION Audio representative. For
your representative go to ionaudio.com.
• A copy of the original sales receipt must also be included for the equipment to be repaired under warranty.
• The faulty equipment must be packed in its original packaging.
• One additional outer layer of packaging must be included to ensure product safety. Failure to do so may
inadequately protect the equipment in transit and therefore jeopardize the warranty.
• ION Audio will not accept COD shipments and no call tags will be issued for merchandise return.
• ION Audio will not return repaired merchandise to customers by priority service except by written request
at the customer’s cost. Requests must be submitted in writing with returned merchandise.
• The defective ION Audio equipment should be sent freight prepaid with the return merchant authorization
number printed clearly on the outer packaging and original sales receipt enclosed to your local service
center.
ION Audio is a trademark of ION Audio, LLC, registered in the U.S. and other countries.
World Headquarters: inMusic Brands, Inc. / 200 Scenic View Drive / Cumberland, RI 02864 / USA / Tel: [phone] /
Fax: [phone]
Important Safety Instructions
1. Read and keep these instructions. Heed all warnings and follow all Instructions.
2. Water and Moisture (if applicable): This product should be kept away from direct contact with liquids. The
apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall
be placed on the apparatus.
3. Clean only with a dry cloth.
4. Do not block any ventilation openings (if applicable). Maintain a minimum distance of 10 mm around the apparatus
for sufficient ventilation. Install in accordance with the manufacturer’s instructions. Do not install this equipment in a
confined or “boxed-in” space such as a bookcase or similar unit, and maintain good ventilation conditions. The
ventilation should not be impeded by covering the ventilation openings with items such as newspaper, tablecloths,
curtains, etc.
5. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat. Do not place exposed flame sources such as lighted candles on the apparatus.
6. Do not defeat the safety purpose of the polarized or grounding-type plug (if applicable). A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
7. Only use attachments/accessories specified by the manufacturer.
8. (If applicable) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus. When moving or not using the appliance, secure the
power cord (e.g., wrap it with a cable tie). Be careful not to damage the power cord. Before using it again, make
sure the power cord has not been damaged. If the power cord has been damaged at all, bring the unit and cord to a
qualified service technician for repair or replacement as specified by the manufacturer.
9. Use only the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the
apparatus (if applicable). When a cart is used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
10. Unplug this apparatus during lightning storms or when unused for long periods of time.
11. Power Sources (if applicable): This product should be connected to a power supply only of the type described in
these operating instructions, or as marked on the unit.
12. Protective earthing terminal (if applicable): The apparatus should be connected to a mains socket outlet
with a protective earthing connection.
13. For Class II apparatus only (if applicable): This symbol means the equipment is a Class II or double-
insulated electrical appliance. It has been designed in such a way that it does not require a safety
connection to electrical earth.
14. Caution: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire, etc.
15. Where the Mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain
readily operable.
16. Class II Wiring (if applicable): To reduce the risk of electric shock, the external wiring connected to the terminals with
“Class II Wiring” requires Class II wiring installed by an instructed person or the use of ready-made leads or cords.
17. This apparatus is for professional use only. Intended operational climate: moderate.
18. Warning (if applicable): Excessive sound pressure (high volumes) from headphones can cause hearing
loss.
19. Warning (if applicable): Please refer to any important information (e.g., electrical, safety, etc.) printed on the
exterior bottom enclosure or rear panel before installing or operating the product.
20. Warning (if applicable): Terminals marked with the lightning bolt symbol may be of sufficient magnitude to
constitute a risk of electric shock.
21. As an electrical appliance, this device must be turned on and checked after a long period of non-use for
maintenance purposes.
Safety Notices
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE ANY COVER. NO USER- SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within the equilateral triangle is
intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
INSTRUCTIONS: The exclamation point within the equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature accompanying this
appliance.
WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture.
Electrical equipment should NEVER be kept or stored in damp environments.
CAUTION (for U.S.A. & CANADIAN models only): TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED)
PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
NOTICE CONCERNING FCC REGULATIONS: You are cautioned that changes or modifications not expressly
approved by the part responsible for compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures: (a) reorient or relocate the receiving antenna;
(b) move this unit; (c) increase the separation between the equipment and receiver; (d) connect the equipment into an
outlet on a circuit different from that to which the receiver is connected; (e) be sure that all cables are properly shielded,
using a choke or ferrite where appropriate; (f) consult the dealer or an experienced radio/television technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between
the radiator and your body.
RF Warning Statement: The device has been evaluated to meet general RF exposure requirement.
The product can be used in European without restrict.
If you are unsure of how or where to dispose of a battery, refer to your local ordinances for the proper location, method, etc.
Warning: Do not ingest the battery—chemical burn hazard. The remote control supplied with this product
contains a coin/button-cell battery. If the coin/button-cell battery is swallowed, it can cause severe internal burns
in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery
compartment does not close securely, stop using the product and keep it away from children. If you think
batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
For Canadian Models: This device contains licence-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development (ISED) Canada’s licence-exempt RSS(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
Correct Disposal of This Product: This marking indicates that this product should not be disposed with
other household wastes throughout the EU. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and collection systems or contact the retailer
where the product was purchased. They can take this product for environmentally safe recycling.
General Note on the Declaration of Conformity: We hereby declare that this device is in accordance with
the essential requirements of the European Directive 2014/53/EU. The full EU declaration of conformity can
be requested at the following address shown here or at ionaudio.com/safety:
inMusic GmbH
Harkortstr. 12 - 32
40880 Ratingen
GERMANY
Box Contents
Party Rocker Max Power Cable (IEC)
Microphone & Cable
1/8” Stereo Aux Cable
Quickstart Guide/Safety & Warranty Information
Support
Thank you for purchasing the Party Rocker Max. At ION, your entertainment is as
important to us as it is to you. That’s why we design our products with one thing in
mind—to make your life more fun and more convenient.
For the latest information about this product (documentation, technical specifications,
system requirements, compatibility information, etc.) and product registration, visit
ionaudio.com.
For additional product support, visit ionaudio.com/support.
Caution: Do not expose Party Rocker Max to rain or standing water.
Light Modes
There are five modes to select from for how the dome lights react to the music by
pressing the Party Lights button:
• Beat Sync: The dome lights spin and change color to the beat of the music
playing.
• Auto: The dome lights spin and change color with a predetermined pattern
regardless of the beat of the music playing.
• Single Color: The lights change one color at a time and do not move.
• Freeze: All colors remain on and unmoving until a new mode is selected.
• Off: The dome lights turn off.
Speaker Light Mode: Press this button to cycle through these different light effects:
• EQ Bars (reactive to music)
• Vertical Lights Wipe (non-reactive to music)
• Diagonal Lights Wipe (non-reactive to music)
• Vertical Lights Scrolling (non-reactive to music)
• Snowflake/Square Lights (non-reactive to music)
• Moving Block Bar (reactive to music)
• Pulsating Block (reactive to music)
• Horizontal Pulsating Bar (reactive to music)
• Diagonal with Changing Colors (reactive to music)
• Cross with Changing Colors (reactive to music)
• Solid Color (reactive to music)
• Pulsating Block with Spinning Block (reactive to music)
• Snowflake/Square Lights Fill (non-reactive to music)
• Spinning Crosses and Expanding Square (non-reactive to music)
• Vertical Pulsating Bar (reactive to music)
• Moving Diagonal (non-reactive to music)
Troubleshooting
If the sound is distorted: Try lowering the volume control of your sound source or
musical instrument. Also, try to reduce the overall volume of Party Rocker Max.
If there is too much bass: Try adjusting the tone or EQ control on your sound source
to lower the bass level. This will allow you to play the music louder before clipping
(distortion) occurs.
If there is a high-pitched whistling noise when using microphones: This is
probably feedback. Point the microphone away from the speaker.
If you can’t hear the microphone over the music volume: Turn down the music
volume from your source.
Features
1. Aux Input (1/8”) 2. Mic Inputs (1/4”) 3. Power/Charge LED
4. Bluetooth LED 5. Bluetooth Disconnect 6. All Lights On/Off
7. Party Lights Mode
10. Echo
13. Power Cable Input (IEC)
8. Speaker Light Mode
11. Main Volume Control
9. Light Buttons
12. Power On/Off Switch
Quick Setup
1. Make sure all items listed under Introduction > Box Contents at the beginning of this
guide are included in the box.
2. Read safety instruction booklet before using the product.
3. For optimal performance, place Party Rocker Max in the center of the room so it is
unobstructed by walls, furniture, etc.
4. Turn down the Main Volume on the Party Rocker Max.
5. Turn on Party Rocker Max.
6. Connect your music player with an audio cable or Bluetooth.
7. Adjust the volume on your music player and on Party Rocker Max as needed.
8. Adjust the Light Mode buttons on Party Rocker Max as needed.
9. Turn off Party Rocker Max when not in use.
Pairing a Bluetooth Device
1. Turn on your Bluetooth device.
2. Power on Party Rocker Max and it will automatically go into pairing mode to search for
Bluetooth devices. You will know you are in pairing mode when the Bluetooth LED is
off.
3. If your Bluetooth device is not able to pair to Party Rocker Max, press the Bluetooth
Disconnect button on the unit to break previous Bluetooth connections and reset the
Bluetooth module.
4. Navigate to your Bluetooth device’s setup screen, find Party Rocker Max and connect.
Note: If your Bluetooth device prompts for a pairing code, enter 0000.
5. The Bluetooth LED will light up solid when it is “paired.”
Note: If you experience trouble pairing or playing music, update your device's OS.
6. To disconnect pairing, press the Bluetooth Disconnect button on Party Rocker Max.
7. To connect to another Bluetooth device, repeat steps 3-4.
Note: Maximum range will be achieved when using devices with Bluetooth 5.0.
Rechargeable Batteries
Rechargeable lead-acid batteries are the same type used in automobiles. As with your car
battery, how you use this battery has a significant impact on its lifespan. With proper use
and treatment, a lead-acid battery can last for years. Here are some recommendations for
getting the longest life from the internal battery.
General Usage
Fully charge the battery before using it.
Charge the battery completely after each use.
Storage
For best product longevity, do not store at exceedingly hot (greater than
90°F/32°C) or exceedingly cold (less than 32°F/0°C) temperatures.
It is acceptable to leave your sound system plugged in. This will not
overcharge the battery.
If you leave the battery level low and do not charge it for 6 months, it may
permanently lose capacity.
Repair
If the battery fails to charge, check your fuse near the power cable input. If
your fuse is intact and it still will not charge, contact ION Audio at
ionaudio.com.
Disposal
Bring the unit to a recycling center or dispose of in accordance with local
ordinances.
Technical Specifications
Output Power: 100 W (peak)
Frequency Response: 65 Hz – 20 kHz (+3 dB)
Drivers:
Low-Frequency: 8.0” / 203 mm woofer
High-Frequency: 3.0” / 76 mm tweeter
Bluetooth:
Profile: A2DP, AVRCP
Range: Up to 100 ft. (30.5 m) *
Transmitter Frequency Range: 2402 MHz - 2480
MHz
Maximum Transmitter Power: < 8 dBm (EIRP)
* Bluetooth range is affected by walls,
obstructions, and movement. For optimal
performance, place the product in the center of
the room so it is unobstructed by walls, furniture,
etc.
** Battery life may vary based on temperature,
age, and volume usage of product.
Trademarks & Licenses
ION Audio is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries. The
Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by
ION Audio is under license. All other product names, company names, trademarks, or trade names
are those of their respective owners.
Microphone Type: Dynamic (included)
Battery Life (when fully charged):
Up to 75 hours (with music only)
Up to 6 hours (with lights and music)
Recharge Time: 10 hours
Power:
Connection: IEC
Input Voltage: 100–240 VAC, 50/60 Hz
120 W
Dimensions (DxWxH):
15.0" x 11.0" x 17.25" / 381 x 279 x 438 mm
Weight: 24.6 lbs. / 11.16 kg