User's Manual Part 1

Operation

Connecting with a Bluetooth Device

1. Turn on Party Rocker Express using the power button.

2. Navigate to your Bluetooth device’s setup screen, find “Party Rocker Express” and connect.

Note: If your Bluetooth device prompts for a pairing code, enter ‘0000’.

Note: The next time you approach Party Rocker Express with your Bluetooth device, it will

automatically re-connect.

3. If your Bluetooth device is not able to connect to Party Rocker Express, press and hold the Bluetooth

button on Party Rocker Express for 3 seconds to break previous Bluetooth connections and reset the

Bluetooth module.

Note: Maximum range will be achieved when using devices with Bluetooth 4.0.

4. Start music playback from your Bluetooth device.

5. To connect to another Bluetooth device, press and hold the Bluetooth button for 3 seconds. Repeat

Step 2.

6. To disconnect a connected Bluetooth device, press and hold the Bluetooth button for 3 seconds.

Note: If you experience trouble connecting or playing music, update your device's OS.

Troubleshooting

If the sound is distorted: Try lowering the volume control of your sound source or musical instrument.

Also, try to reduce the overall volume of Party Rocker Express.

If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass

level. This will allow you to play the music louder before clipping (distortion) occurs.

If there is a high-pitched whistling noise when using microphones: This is probably feedback. Point the

microphone away from the speaker.

If you can’t hear the microphone over the music volume: Turn down the music volume from your source.