PROFILE PRO USB TURNTABLE WITH INPUT QUICKSTART GUIDE ENGLISH ( 3 – 6 ) MANUAL DE INICIO RÁPIDO ESPAÑOL ( 7 – 10 ) GUIDE D’UTILISATION RAPIDE FRANÇAIS ( 11 – 14 ) KURZANLEITUNG DEUTSCH ( 15 – 18 ) MANUALE RAPIDO DI UTILIZZAZIONE ITALIANO ( 19 – 22 ) SNELSTARTGIDS NEDERLANDS ( 23 – 26 )
QUICKSTART GUIDE o Make sure that the items listed below are included in the box: o PROFILE PRO Turntable o Slipmat o 45 RPM Adapter o USB Cable o CD o Quickstart Guide o Safety Instructions & Warranty Information o READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT o Go to http://www.ion-audio.com for product registration. INTRODUCTION PROFILE PRO connects directly to your computer to turn your treasured vinyl recordings into digital music.
REAR PANEL FEATURES 2 3 4 1 1. Power Cable: This power cable should be plugged into a wall receptacle AFTER all audio connections are made. 2. RCA Audio Output Cables: These cables should be plugged into the audio inputs of your home stereo system. (Please note: you can still copy records to your computer, even if the audio outputs of the turntable are not connected to a stereo system). IMPORTANT WARNING: The RCA cables are LINE level. Please only connect these cables to LINE level inputs.
GENERAL CONTROLS 6 10 5 9 8 5. 7 Platter: This platter must be securely fastened to the turntable prior to operation. The Motor Drive Belt can be found on the drive ring underneath the platter. IMPORTANT Make sure that the slipmat is always placed on top of the platter while using the turntable. Failure to use the slipmat may cause damage to your media as well as damage to the turntable. 6. 45 RPM Adapter Holder: Holds the included 45 RPM adapter.
TROUBLESHOOTING Refer to the following troubleshooting scenarios if you experience difficulty recording your vinyl to your computer. PROBLEM CAUSE SOLUTION Needle is not on the record. Place the needle on the record. Turntable not powered. Make sure that the turntable is connected to a live power outlet and that it is powered on. RCA outputs not connected to speaker system. Make sure you have connected the turntable’s RCA outputs to a speaker system and that the speaker system is powered on.
GUÍA DE INICIO RÁPIDO o Asegúrese de que todos los elementos abajo indicados estén incluidos en la caja. o Giradiscos PROFILE PRO o Alfombrilla Antideslizante o Adaptador para 45 RPM o Cable USB o CD o Guía de inicio rápido o Folleto de información sobre la seguridad y la garantía o LEA EL FOLLETO DE INSTRUCCIONES DE SEGURIDAD ANTES DE UTILIZAR EL PRODUCTO. o Visite http://www.ion-audio.com para registrar el producto.
CARACTERÍSTICAS DEL PANEL TRASERO 2 3 4 1 1. Cable de alimentación: Este cable de alimentación se debe enchufar a un tomacorriente en la pared DESPUÉS de que se hagan todas las conexiones de audio. 2. Cables RCA de salida de audio: Estos cables se deben enchufar en las entradas de audio de su sistema estéreo hogareño. (Para tener en cuenta: igualmente se pueden copiar discos en su computadora, incluso si las salidas de audio del giradiscos no están conectadas a un sistema estéreo).
CONTROLES GENERALES 6 10 5 9 8 5. 7 Plato: Este plato se debe ajustar firmemente al giradiscos antes de hacerlo funcionar. La correa de transmisión del motor se puede encontrar en el aro impulsor debajo del plato. IMPORTANTE : Asegúrese de que la alfombrilla esté siempre colocada sobre el plato cuando se usa el giradiscos. Si no se usa la alfombrilla, puede dañarse el medio, así como el giradiscos. 6. Soporte del Adaptador de 45 RPM: Sostiene el adaptador de 45 RPM incluido.
SOLUCIÓN DE PROBLEMAS Si experimenta dificultades al grabar sus vinilos en su computadora, consulte los siguientes escenarios de solución de problemas. PROBLEMA CAUSA SOLUCIÓN La púa no está sobre el disco. Coloque la púa sobre el disco. El giradiscos no está encendido. Asegúrese de que el giradiscos esté conectado a un tomacorriente alimentado y que esté encendido. Las salidas RCA no están conectadas al sistema de altavoces.
GUIDE D’UTILISATION RAPIDE o Veuillez vous assurer que les articles suivants sont dans la boîte. o Tourne-disque PROFILE PRO o Tapis o Adaptateur 45 t/min o Câble USB o CD o Guide d’utilisation rapide o Le livret des consignes de sécurité et des informations concernant la garantie o VEUILLEZ LIRE LE LIVRET DES CONSIGNES DE SÉCURITÉ AVANT D'UTILISER LE PRODUIT. o Allez à http://www.ion-audio.com pour enregistrer le produit.
CARACTÉRISTIQUES DU PANNEAU ARRIÈRE 2 3 4 1 1. Câble d’alimentation : Ce câble d’alimentation doit être branché dans la prise murale APRÈS avoir effectué tous les autres branchements. 2. Câbles stéréo RCA : Ces câbles doivent être branchés dans les entrées audio de votre système stéréo. (Remarque : vous pouvez copier des albums sur votre ordinateur même si les sorties audio du tourne-disque ne sont pas branchées à un système stéréo. MISE EN GARDE : Les câbles RCA sont à niveau ligne (LINE).
COMMANDES PRINCIPALES 6 10 5 9 8 5. 7 Plateau : Le plateau doit être fixé fermement au tourne-disque avant de pouvoir l’utiliser. La courroie d’entraînement se trouve sur l’anneau d’entraînement sous le plateau. Voir les CONSIGNES D’INSTALLATION pour de plus amples informations sur l’installation de la courroie d’entraînement. IMPORTANT Assurez-vous que le tapis est toujours placé sur le plateau lors de l’utilisation du tourne-disque.
DÉPANNAGE Veuillez consulter les scénarios suivants si vous avez des problèmes lors de l’enregistrement de vos vinyles. PROBLÈME CAUSE SOLUTION L’aiguille n’est pas déposée sur le vinyle. Déposez l’aiguille sur le vinyle. La table tournante n’est pas branchée. Assurez-vous que le tourne-disque est branché à prise d’alimentation et qu’il est sous tension. Les sorties RCA ne sont pas branchées à un système de sonorisation.
KURZANLEITUNG o Überprüfen SIe bitte, dass sich die in der unteren Abbildung aufgeführten Gegenstände in der Produktverpackung befinden. o PROFILE PRO o Slipmat o 45 RPM Adapter o USB-Kabel o CD o Kurzanleitung o Broschüre mit den Sicherheits- und Garantierichtlinien o LESEN SIE BITTE DIE SICHERHEITSHINWEISE, BEVOR SIE DAS PRODUKT VERWENDEN o Registrieren Sie Ihr Produkt online auf http://www.ion-audio.com.
ÜBERSICHT ÜBER DIE ZURÜCK 2 3 4 1 1. Netzkabel: Das Netzkabel verbinden Sie mit einer Steckdose, NACHDEM Sie alle Audioverbindungen hergestellt haben. 2. RCA Audioausgang: Diese Kabel schließen Sie an die Audioeingänge Ihrer Stereoanlage an. (Beachten Sie bitte: Sie können auch dann noch Musik auf Ihren Computer kopieren, wenn die Audioausgänge des Gerätes nicht mit Ihrer Stereoanlage verbunden sind). WICHTIGER HINWEIS: Die RCA Kabel führen einen LINE Pegel.
BEDIENELEMENTE 6 10 5 9 8 5. 7 Plattenteller: Der Plattenteller sollte sicher auf dem Plattenspieler montiert werden, bevor Sie das Gerät verwenden. WICHTIG Achten Sie immer darauf, dass die Slipmat im auf dem Plattenteller liegt, wenn Sie den Schallplattenspieler verwenden. Anderenfalls könnten Sie sowohl Ihre Schallplatten als auch den Plattenspieler beschädigen. 6. 45 RPM Adapter Ablage – Ablage für den beiliegenden 45 RPM Adapter. Lagen Sie den Adapter hier ab, wenn Sie ihn nicht verwenden.
FEHLERHILFE Sollten Sie bei der Verwendung Ihres USB Plattenspielers auf Probleme stoßen, können Sie die folgende Fehlersuchtabelle verwenden, um eine Lösung zu finden. PROBLEM Ich höre bei der Aufnahme kein Audiosignal. Der Klang, den ich höre, ist sehr schlecht. URSACHE LÖSUNG Nadel liegt nicht auf der Schallplatte. Legen Sie die Nadel auf die Schallplatte auf. Plattenspieler hat kein Strom.
GUIDA RAPIDA o Assicurarsi che gli elementi elencati di seguito siano contenuti nella confezione. o Giradischi PROFILE PRO o Tappetino o Adattatore 45 giri o Cavo USB o CD o Guida rapida o Libretto di istruzioni di sicurezza e garanzia o LEGGERE ATTENTAMENTE IL LIBRETTO DI ISTRUZIONI PRIMA DI UTILIZZARE IL PRODOTTO o Recarsi alla pagina http://www.ion-audio.com per la registrazione del prodotto.
CARATTERISTICHE PANNELLO POSTERIORE 2 3 4 1 1. Cavo di alimentazione: questo cavo di alimentazione va inserito in una presa a muro DOPO aver effettuato tutti i collegamenti audio. 2. Cavi di uscita RCA Audio: questi cavi vanno collegati a livello degli ingressi audio dell’impianto home stereo (Nota bene: si possono copiare dischi sul computer, anche se le uscite audio del giradischi non sono collegate ad un impianto stereo). AVVERTENZA IMPORTANTE: i cavi RCA sono a livello di LINEA.
COMANDI GENERALI 6 10 5 9 8 7 5. Piatto: il piatto va fissato bene al giradischi prima dell’uso. La cinghia di trazione motore si trova sull’apposito anello posto sotto al piatto. 6. Supporto Adattatore 45 Giri: Regge l’incluso adattatore per 45 giri. Quando l'adattatore non è in uso, può essere collocato a questo livello. 7. Tasto Stop: questo tasto ferma il motore del giradischi. 8. Tasti 33 e 45 giri: questi tasti controllano il numero di giri al minuto del piatto del giradischi. 9.
RISOLUZIONE DI PROBLEMI Fare riferimento ai seguenti casi di risoluzione di problemi nel caso in cui si avessero difficoltà a registrare i vinili sul computer. PROBLEMA Non si sente l’audio mentre registro. Scarsa qualità sonora. CAUSA SOLUZIONE La puntina non è sul disco. Appoggiare la puntina sul disco. Il giradischi alimentato. Assicurarsi che il giradischi sia collegato ad una presa di alimentazione funzionante e che sia acceso. non è Le uscite RCA non sono collegate all’impianto delle casse.
SNELSTARTGIDS o Controleer of onderstaande onderdelen in de doos zitten. o PROFILE PRO draaita fel o Slipmat o 45 TPM adapter o USB Kabel o CD o Snelstartgids o Veiligheids- en garantie-informatie o LEES DE VEILIGHEIDSINSTRUCTIES VOOR HET PRODUCT GEBRUIKT WORDT o Bezoek http://www.ion-audio.com voor productregistratie. INTRODUCTIE PROFILE PRO maakt rechtstreeks verbinding met uw computer naar uw vinyl opnames converteren naar een digitale muziek.
OVERZICHT ACHTERPANEEL 2 3 4 1 1. Netsnoer: Deze kabel dient in een stopcontact te worden gestoken NADAT alle audioaansluitingen zijn gemaakt. 2. RCA Audio uitgangskabels: Deze kabels worden in de audio-ingangen van uw stereosysteem gestoken. (N.B.: u kunt platen naar uw computer blijven opnemen, ook wanneer de audio-uitgangen van de draaitafel niet aangesloten zijn naar een stereosysteem). BELANGRIJKE WAARSCHUWING: De RCA-kabels zijn LINE-niveau.
ALGEMENE BEDIENING 6 10 5 9 8 5. 7 Plateau: Dit plateau dient vóór gebruik stevig bevestigd te zijn op de draaitafel. De aandrijfriem voor de motor vindt u op de ring onder het plateau. BELANGRIJK Zorg ervoor dat de slipmat altijd op het plateau ligt bij gebruik van de draaitafel. Het niet gebruiken van deze slipmak kan zowel uw media als de draaitafel beschadigen. 6. 45 TPM Adapterhouder: Voor de meegeleverde 45 TPM-adapter.
PROBLEEMOPLOSSING Raadpleeg de volgende probleemoplossingen wanneer u moeilijkheden ondervindt bij het opnemen van uw platen naar uw iPod of computer. PROBLEEM OORZAAK OPLOSSING Naald staat niet op de plaat. Plaats de naald op de plaat. Draaitafel stroom. geen Zorg ervoor dat de draaitafel aangesloten is op een actief stopcontact en dat deze is ingeschakeld. RCA-uitgangen niet aangesloten op speakersysteem.
MANUAL VERSION 1.
www.ion-audio.