Daim Ntawv Qhia Tus Neeg Siv

ManualsBrandsiOptron ManualsOtheriOptron AZ Mount Pro Qib thiab Mus Altazimuth Mount

Quick Start Guide

AZ Mount Pro™ “Level and Go” Altazimuth Mount

Models: #8900, #8920

PACKAGE CONTENTS

 Telescope mount – with built-in GPS, WIFI and rechargeable battery (11.1V, 4400mAh)

 Hand controller (HC) – Go2Nova® 8407

 6” Vixen/Losmandy dual dovetail saddle

 Controller cables X1

 RS232-RJ9 serial cable

 AC adapter for battery charging – 100-240V

 Aluminum carrying case

 2” heavy duty tripod with 3 leveling screws (#8900 only, as shown)

 4.5kg counterweight (#8900 only)

 Two year warranty on the mount, 90 day warranty on the battery

ONLINE RESOURCES (at www.iOptron.com, under “Support”)

 User’s Manual

 Tips for set up and using the products

 Hand controller and mount firmware upgrades (check online for the latest version)

 Reviews and feedbacks from other customers

Actual contents may change from time to time without notice.

Summary of content (6 pages)

PAGE 1
Quick Start Guide AZ Mount Pro™ “Level and Go” Altazimuth Mount Models: #8900, #8920 1 PACKAGE CONTENTS  Telescope mount – with built-in GPS, WIFI and rechargeable battery (11.1V, 4400mAh)  Hand controller (HC) – Go2Nova® 8407  6” Vixen/Losmandy dual dovetail saddle  Controller cables X1  RS232-RJ9 serial cable  AC adapter for battery charging – 100-240V  Aluminum carrying case  2” heavy duty tripod with 3 leveling screws (#8900 only, as shown)  4.
PAGE 2
Please read the full online instruction manual and FAQ for detailed information. 1. TM Un-package the Mount: Remove the AZ Mount Pro (AZMP) mount from the aluminum carrying case. Make sure that the Altitude Lock is fully tightened. Charge the mount using the included AC battery charger to fully charge the mount, until the LED indicator on the AC adapter changed to green. NEVER charge the battery when it is below 0°C. DO NOT use any other AC/DC adapter.
PAGE 3
NOTE: Push the CW shaft out first if a counterweight is needed. 7. over 10kg. (Note: This number is estimated and it is telescope size dependent.) Install Counterweight: Make sure the altitude lock knob is tightened. Back out CW shaft lock screw slightly. Push the CW shaft out of the mount from the center of the dovetail saddle. Retighten the CW shaft lock screw. Slide the counterweight (optional) onto the CW shaft with large opening hole facing inward. Insert the brass pin into the hole on the CW.
PAGE 4
the telescope will slew to the object and automatically start tracking. 12. Sync to Target: If the object is not in the center of the eyepiece, use this function to center and synchronize the object to improve local GOTO accuracy. Press MENU => “Sync to Target”. Follow the on screen instruction to perform the function. (TIP: After slewing to an object, a list of nearby bright object(s) can be displayed by pressing “?” button.) 13.
PAGE 5
4 3 2 1 6 10 9 16 8 7 13 18 14 19 17 15 20 21 11 12 1. AZ Mount Pro Head 2. Altitude Lock 3. Counterweight Shaft Lock 4. Counterweight Shaft 5. Bubble Level 6. Dovetail Saddle 7. Dovetail Saddle Lock Screw 8. Hand Controller Hanger 9. Hand Controller 10. Altitude Lock Lever 11. Hand Controller Socket (HBX) 12. RS232 Socket 13. Battery Status LED 14. Power Switch 15. Battery Charging Socket 16. Level Adjustment Screw 17. Tripod Leg 18. Tripod Knob 19. Tripod Bolt 20.
PAGE 6
IOPTRON TWO YEAR TELESCOPE, MOUNT, AND CONTROLLER WARRANTY A. iOptron warrants your telescope, mount, or controller to be free from defects in materials and workmanship for two years. iOptron will repair or replace such product or part which, upon inspection by iOptron, is found to be defective in materials or workmanship. As a condition to the obligation of iOptron to repair or replace such product, the product must be returned to iOptron together with proof-ofpurchase satisfactory to iOptron. B.