Daim Ntawv Qhia Tus Neeg Siv

4
iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | [phone] | Toll Free [phone] | www.iOptron.com
the telescope will slew to the object and automatically
start tracking.
12. Sync to Target:
If the object is not in the center of the
eyepiece, use this function to center and synchronize the
object to improve local GOTO accuracy. Press MENU =>
“Sync to Target”. Follow the on screen instruction to
perform the function.
(
TIP: After slewing to an object, a list of nearby bright
object(s) can be displayed by pressing “?” button.)
13. Setup Controller: After turn on the mount power, the
mount will ask if you want to run the “assist alignment
wizard.” Press ENTER or do nothing to start the wizard. Or
press BACK to cancel.
The mount will start to perform self calibration by rotating
in both altitude and azimuth directions to find the Zero
Position.
When it stops, the hand controller will display your current
time and site info.
If all the information is correct, you may press ENTER to
confirm and skip waiting for GPS signal. Or if the mount
could not pick up the GPS signal (the mount won’t advance
to next step to start slewing), you can manually change it
by setting Daylight Saving Time (DST) to Y(es) or N(o);
adjusting the date and time; inputting your location
coordinates; entering the time zone offset to the UTC; for
examples:
 Boston is “UTC -300 minutes”
 Los Angeles is “UTC -480 minutes”
 Rome is “UTC +060 minutes”
 Sydney is “UTC +600 minutes”
(TIPS: All time zones in N. America are “UTC -XXX minutes”.
Latitude and longitude coordinates can be obtained from
GPS-equipped devices (navigator, phone), or from internet,
if you are entering them manually. “W/E” =
western/eastern hemisphere; “N/S” = northern/southern
hemisphere; and “d” = degree; “m” = minute; and “s” =
second. Use arrow and number keys to enter location
information.)
Note: You also can adjust these parameters through the
hand controller Setting menu. The hand controller will
remember the time zone, DST and coordinates after power
off. The real time clock is powered by a battery in hand
controller.
14. Zero Position and One Star Alignment:
The default mount
power on position is NOT necessarily the zero position for
AZMP mount. Perform a self-calibration will establish the
Zero Position. Or you can set the Zero Position by press
MENU => “Zero Position” => “Set Zero Position”.
Use
[e-mail] for technical supports.
Optional Accessories:
#8953 Secondary Vixen-style dovetail saddle
#3006-10 4.5kg counterweight
#3006-05 2kg counterweigh
#8034 Tri-Pier
#8034-RC Tri-Pier with rolling case