User's Manual

2.2. Identification of Parts

Figure 1.CEM40 mount assembly

2.3. CEM40 Mount Basic Cable Connection

Figure 2. Ports on a CEM40 mount

 OFF/ON (O/I): Power Switch

 DC 12V: DC power socket to power the mount (2.1mmX5.5mm, center positive)

 HBX (Hand Box): For connecting to an 8407 Hand Controller

 iPORT: Auxiliary port for connecting to other iOptron accessories, such as a GPS receiver,

an iStarFi WiFi adapter, an electronic focuser or for observatory dome control. DO NOT plug

ST-4 guiding camera cable into this port, It will damage the guide camera electronics.

Az. adj. knob

Lat. locking screws

Tripod

DEC gear switch

Polar axis cover

CW mounting housing

CW locking screw

Counterweight

CW bar

Dovetail saddle

Azi. locking screw