9181078/9303856/9298325 9202043/9173646/9332308 Assembly Manual {IF APPLICABLE) Important < Please read these instructions before implicating 1o assemble your bike:
Salty information 3 In the Boy, 8 Parts 5 Tools & Assembly 8 Step Step 2 L 8 Ste pa & Attaching Fender [F APPLICABLE &« chinning Pleb d 11 Step 5 1P Pleb 0 15 Ste 7 18 Riding Advice 18 Before Riding A8 Tubing B Bibles Riding In Bad Weather 18 Riding In the Dark 19 Riding Using Personal Musics Slavers 8 NEED ANY HELP ? CUSTOMER CARE HELPLINE 01702 208187 WE CAN GIVE YOU GUIDANCE ON ASSEMBLY, PARTS & TECHNICAL ADVICE
Important Please read these: instructions carefully before starting assembly WARNING! Thai Bike has been designed. assembled and tasted in accordance with the BS EN 180 8098 standard to ensure your safety To make sure the bike remains safe. It should only be used for recreational Use.
important Please read these instructions carefully before starting assembly CAUTION! Only use suitability tools to assembled the bike The use of unsuitable tools may lead o personal in fury and damage © the bike CAUTION! Always ensure all packaging s removed from the bike before assembly and use. Failure to remove the packaging may prevent the correct operation and may lead to personal injury and damage 1o the bike.
€3 Bike (unpicked with rear wheel assembled) @ Stabilizers (if applicable) €3 Handiness and stem O Front mudguard £ Seat post and saddle © Rear mudguard € Front wheel € Pedals (supplied in separate hox) Tools (supplied in separate box) Witt Crassness wench Combination Wrenches Fix WrerchiBrmigrmm)
IMPORTANT! Before assembling the bike, check all the parts indicated In the manual are in the box. Inspect the parts for sign of damage Do not assemble the bike if you observe any damage components. IMPORTANT! Always take Cara when removing the packaging fo prevent damage fo the bike, 1.
Mimi inserting 2a Insert the Stem WARNING! When assembling the handlebar and stem, make sure it is rinsed beyond the minimum insert mark Failure o observe this warning may lad to a potentially unstable bike and may result in serious personal bury, If necessary loosen the stem bolt at the top of the handlebar summat allow the wedge nut o move freely.
HOT.
SRR Loosening the Front Brake Ba fore the front wheal can be installed, the front brake mulatto be nonsense. This allows tha front Tyre 10 puss between the brake during assembly. Loosen the Cable Pinch bolt 0 1o release the brake cable and open the calipers.
Step 5 (continued) 5¢ Se Ra-Adjust the Front Brake Queers tha two gang an {he front brake together with one hand Check that the brake pads Q line up with the tint, and do not launch the Tyre. Stadium their position if necessary.
Before Riding You should perform the following checks before siding our bike fo ensure it is safe to use and Paralleling correctly. 4. Is the saddle Secure? While standing next to the bike try and move the saddle from side lo side If the saddle moves vou should firefighter the seat past but or the dissed clamp bolts 2.
Riding in Bad Weather Riding in‘the Dark A WARNING! Always take extra care when riding in wet fogy. windy or icy conditions. The brakes may 710th be a8 effective and the braking distances may be increased. When riding In bad weather L & wet, goofy, windy or icy, always wear bright. reflective clothing which s warm and waterproof. You should always give other road users clear signals o plenty of ime particular when approaching {unctions.