Installation Guide
PAGE 1
Undermount Stainless Steel Sink
Installation Instructions
Before You Start
• IPT Sink Company recommends that all undermount sinks be installed by an experienced, professional installer.
• IMPORTANT: The enclosed cutout template will create a countertop opening with a minimal (1/8” or less) reveal. It is
recommended that you discuss with your installer and agree that the finished appearance is the desired effect. IPT Sink
Company is not responsible for improper sink or countertop installations.
• IMPORTANT: The cabinet must be installed, secured, plumb, and level. Failure of this step can lead to product
damage.
• IPT Sink Company undermount sinks should only be fastened to a solid surface countertop (i.e. granite, Corian® or
Silestone®).
• IPT Sink Company is not responsible for sink or countertop if damaged during installation. Be sure to inspect the sink
for damage prior to beginning installation.
• Metal edges may be sharp – use caution when handling.
• Follow all local plumbing and building codes.
Recommended Tools & Materials (Not Included)
Tape Measure
Safety Glasses
Painter’s Tape
Level
Framing Square
Pencil (not permanent marker)
Shims or Cabinet Fillers
Denatured Alcohol
Clamps
Construction Adhesive
Silicone Sealant
Screws (recommended by countertop manufacturer)
50/50 Double Bowl Kitchen Sink
60/40 Double Bowl
Kitchen Sink
D-Shaped Single Bowl
Kitchen Sink
Single Bowl Vanity Sink
Contact IPT Sink Company at (678) 445-4638 or visit www.iptsink.com. Copyright ©2016, IPT Sink Company Inc. All rights reserved.